Loading ...
Loading ...
Loading ...
28
• The following data is shown in information
view.
• The last on/off setting of the LCD monitor is
saved when the power is manually shut off.
The camera will automatically restore the
LCD monitor to the last setting at startup.
• However, until the battery is replaced, the
LCD monitor will not turn on automatically
if a low battery caused the power to shut
off automatically.
• The image in the LCD monitor will darken
when struck by direct sunlight or strong illumi-
nation. This does not constitute a malfunction.
Zoom Indicator
Using the Shutter Button
The shutter button features a two-stage action.
Pressing Halfway
Lightly press the shutter button halfway to
automatically set the exposure and focus
settings. The camera will beep twice and the
upper indicator will shine green (red for flash)
when the metering is finished.
• The lower indicator will also shine orange
when the camera is ready in macro mode.
Pressing Fully
Press the button all the way down to activate
the shutter. The beep will sound once. The
upper indicator will flash green while the
image is being recorded onto the CF card.
• The recorded image will be temporarily stored in
the camera’s built-in memory and then be written
to the CF card. As long as there is sufficient built-
in memory free, the next image can be recorded
immediately after the previous image.
• With the LCD monitor in information view
mode, you can view the status of the image
being written to the CF card with the memory
display (built-in) at the bottom right.
Built-in Memory
Display
Macro Mode
Shooting Methods
Flash
Exposure Compensation
White Balance
Compression
Resolution
Loading ...
Loading ...
Loading ...