Gaggenau CX492610 36" Vario 400 Series Full Surface Induction Cooktop

User Manual - Page 3

For CX492610. Also, The document are for others Gaggenau models: CX482610

PDF File Manual, 40 pages, Read Online | Download pdf file

CX492610 photo
Loading ...
Loading ...
3
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT: The appliance must be
installed by a qualified installer.
INSTALLER: please leave these
instructions with this unit for the owner.
Show the owner the location of the circuit
breaker or fuse. Mark it for easy
reference.
OWNER: Please retain these instructions
for future reference.
WARNING
If the information in this manual is
not followed exactly, fire or shock
may result causing property damage
or personal injury.
WARNING
Do not repair, replace or remove any
part of the appliance unless
specifically recommended in the
manuals. Improper installation,
service or maintenance can cause
injury or property damage. Refer to
this manual for guidance. All other
servicing should be done by an
authorized servicer.
Remove all tape and packaging before
using the appliance. Destroy the
packaging after unpacking the appliance.
Never allow children to play with
packaging material.
Hidden surfaces may have sharp edges.
Use caution when reaching behind or
under appliance.
This appliance is intended for use up to a
maximum height of 13,100 feet
(4,000 meters) above sea level.
Improper installation is not covered by
the warranty.
Safety Codes and Standards
This appliance complies with one or more
of the following Standards:
ʑ UL 858, The Standard for the Safety of
Household Electric Ranges
ʑ UL 507, The Standard for the Safety of
Electric Fans
ʑ CAN/CSA-C22.2 No. 113-M1984 Fans and
Ventilators
ʑ CAN/CSA-C22.2 No. 61-M89 Household
Cooking Ranges
It is the responsibility of the owner and
the installer to determine if additional
requirements and/or standards apply to
specific installations.
Electric Safety
WARNING
Before you plug in an electrical cord
or turn on power supply, make sure
all controls are in the OFF position.
Loading ...
Loading ...
Loading ...