Loading ...
Loading ...
Loading ...
22 49-90571-3
Installation Instructions
REVERSING THE DOOR SWING (Optional)
IMPORTANT NOTES
• Before you start, unplug the dryer from its electrical
outlet.
• Handle parts carefully to avoid scratching paint.
• Provide a non-scratching work surface for the doors.
• Tools you will need: Phillips-head screwdriver.
• Once you begin, do not move the cabinet until
door-swing reversal is completed.
• These instructions are for changing the hinges from
the right side to the left side—if you ever want to
switch them back to the right side, follow these same
instructions and reverse all references to the left and
right.
REMOVE THE DOOR ASSEMBLY
• Open the door. Remove the two screws holding the
hinge/door assembly to the dryer. Carefully set the
hinge/door assembly aside.
1
• Remove the two screws holding the strike plate.
Rotate it and install it on the opposite side.
2
Reinstall
Strike Plate
and Screws
REMOVE, ROTATE AND
REPLACE THE STRIKE PLATE
3
REMOVE, ROTATE AND
REPLACE THE INNER DOOR
Remove six
screws and the
inner door
Inner door shown
rotated 180
o
Replace the
inner door and
six screws
Strike Plate
and Screws
Hinge and Door
Assembly
Hold the Door and
Remove Hinge Screws
from the Dryer
4
ROTATE AND REPLACE THE
HINGE/DOOR ASSEMBLY
• Rotate and replace the hinge/door assembly, on the
opposite side, using the same two screws.
• Remove the six screws securing the inner door to
the outer door. Remove the inner door, rotate it 180
o
and reinstall it into the outer door using the same
six screws.
Secure with
same two screws
Loading ...
Loading ...
Loading ...