93379 User Manual

Loading ...

Auto On Setting Sleep Mode Options Time To Music Ethernet

Audio O Alwayson Alwayson

Audio 15Min 6-8seconds Alwayson

Audio 3Hrs 6-8seconds Alwayson

Auto On Setting Sleep Mode Options Time To Music Ethernet

PowerButton O Alwayson Alwayson

PowerButton 15Min 2-3seconds Alwayson

PowerButton 3Hrs 2-3seconds Alwayson

APPENDIX B

DSP 2-750 MKII Amplier - Auto On/Sleep Mode Details

Auto On Setting Sleep Mode Options Time To Music Ethernet

AudioGreen None 6-8seconds Turnsoafter15minswithoutaudio

Auto On Setting Sleep Mode Options Time To Music Ethernet

Voltage None 6-8seconds Alwayson

Auto On Setting Sleep Mode Options Time To Music Ethernet

VoltageGreen None 6-8seconds Turnsoafter15minswithoutvoltage

Dim White Power Button Amplierispluggedinandinstandbymode.

BrightWhitePowerButton  Amplierisactive.

Power Button Blinking The amp is in ID Amp Mode (see page 9).

Green LED Signal is present (>1.0mv) on channel.

Blinking Green Signal is going above and below the active level or between songs.

Blinking Red The channel is being over driven.

Solid Red The amp is in protection mode (see page 6).

Power Button Blinking Light Amp temperature exceeds the design maximum.

+LED’sBlinkingRed

Step1    Turnampliero.

Step 2 With light pressure adjust 1L Volume Control full counter clockwise.

Step 3 With light pressure adjust 1R Volume Control full clockwise.

Step4    Poweronamplier(waitforPowerButtontoshowaseriesofashes).

Step5    Turnampliero.

Step 6 Set the 1L Volume Control full clockwise or at desired volume level.

Step7    Poweronamplier.

LED Indicator Explanation

DHCP Reset Step DHCP Reset Steps

APPENDIX A

Amplier Factory Reset Amplier Factory Reset Steps

Step 1 InaURLaddresswindowentertheampliersIPaddresswiththeextension/Update.htm

       (ex.192.168.1.100/Update.htm)

Step 2 Ontheupdatepage,locatetheredresetbutton.Usethisbuttontocompletelyresettheamplier.

Step 3 ReturntotheHomePagetosetuptheamplier.Note:EQpresetswillnotbedeleted.

Loading ...

Sonance 93379 Sonamp DSP 2-750 MKII Amplifier