Loading ...
Loading ...
Loading ...
Depending on the design and size of the catch, it will need
to be recessed into the functional grille panel and possibly
partially into the decorative grille panel.
subzero.com
|
7
EXTENDED HEIGHT GRILLE
Grille Hinging System
INSTALL CLEAT AND CATCH
The cleat must be located to the left of a line 3" (76) to the
right of the center of the built-in unit to clear the system fan
shroud. Refer to the illustration below.
Cut a rectangular clearance hole in the functional grille panel
to allow the cleat to extend through when the decorative
grille panel is closed.
Install a customer-supplied catch between the back of the
decorative grille panel and the functional grille panel to pre-
vent noise caused by vibration.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
C
L
FUNCTIONAL GRILLE PANEL
CATCH
CLEARANCE HOLE
CLEAT
2
1
/2" (64) MIN
2
1
/2" (64) MIN
3" (76)
DECORATIVE GRILLE PANEL
Install cleat and catch.
CATCH
Catch (side view).
Loading ...