Loading ...
Loading ...
Loading ...
13
100 SERIES
User manual
Installation
Before installing the loudspeakers, ensure that the intended positions in the ceiling/wall are free of any
obstruction such as air vents or any cables that may interfere with the installation.
Before attaching the products, make sure the ceiling/walls are strong, in perfect condition, and will remain
so long-term. When attaching the brackets, make sure to use appropriate screws and plugs for the material
and use a specialised installer, if required.
These products are IP66 certified for increased water and dust-resistance. To protect their service life,
however, we do not recommend leaving them exposed to permanently running water. They should never
be submerged in water.
After heavy rainfall, we recommend waiting a few hours before turning them on again; allowing them to
dry-out naturally will restore nominal audio functioning.
• To mount the loudspeakers, firstly remove the mounting bracket (fig. 4) then fix the bracket firmly,
either horizontally or vertically depending on your choice, to the support using suitable screws for the
supporting material (fig. 5).
• For a more discreet installation, we recommend threading the cable through the hole in the middle of the
mounting bracket (fig. 6). Make sure to leave around 11.8” (30cm) of cable to allow you to connect and
position the loudspeaker easily afterwards.
• Then replace the loudspeaker in its bracket and tighten the knobs.(fig. 7). Remove the silicone cover from
the terminals (fig. 8) and connect the cables to the loudspeaker’s input terminals (+ red and - black)
before replacing the terminals’ rubber cover.
• Next, direct the loudspeaker towards the listening area and tighten the clamps securely (fig. 9).
• Finally, adjust the position of the FOCAL logo on the grille (fig. 10).
Loading ...
Loading ...
Loading ...