Loading ...
Loading ...
Loading ...
5
• Never use an extension cord to connect power to the unit. Failure to follow these instructions can
result in fire or electrical shock.
• When a two-prong wall receptacle is encountered, contact a qualified electrician to have it
replaced with a 3-prong receptacle in accordance with applicable electrical codes.
• This ice maker requires a standard 115/120 volts AC, 60Hz electrical outlet with three-prong
• ground. The appliance can resist temporary voltage fluctuations from -15 to +10%.
• To prevent accidental injury, the cord should be secured behind the ice maker and not left
exposed or dangling.
• Models with “OS” in their model number can be used outdoors. The rest of the icemakers
included in this manual are designed for indoor use only. Many outdoor outlets are controlled by
wall switches. Turning power off and then on again may cause the GFCI switch to trip. A GFCI
(ground fault circuit interrupter) is built into every line cord. Do not defeat or bypass this
important safety feature. The line cord supplied with this appliance is specifically designed for
outdoor use. In the event the cord becomes damaged, use only a factory-supplied replacement
cord with a GFCI. You may purchase these cords from either our sales or service departments at
1-718-893-3900 (Sales) or 1-800-932-4267 (Service). They can also be purchased online at
www.summitappliance.com/support.
Connecting the Water Supply
• Not all the necessary hardware is provided for installation so you should hire a professional
licensed plumber to complete the installation.
• Connect tubing (supplied with unit) to the nearest cold water source. Connect sufficient tubing to
the unit to allow the appliance to be moved freely for cleaning and service. Also make sure that
the tubing is not pinched or damaged during transportation.
• Position the unit to allow free airflow through the front of the unit. Wipe out inside of unit and ice
bin with a damp cloth.
Reversing the Door Swing (for the BIM25H32 and BIM25H34)
This unit can be opened from either the right side or the left. By default, the door hinge is on the right
side. If you prefer it on the left, please follow these instructions:
NOTE: All of the parts (including the screws) that are removed must be kept for the reinstallation of
the door.
1. Remove the three screws from the top hinge.
2. Remove the door from the lower hinge, and keep the padded surface upward to prevent
scratching.
3. Remove the two screws from the bottom hinge, then remove the bottom hinge.
4. Remove the three hole covers from the upper left side of the cabinet and use them to cover the
holes on the right side.
5. Unscrew the hinge pin from the top hinge, flip the hinge over, and reinstall the pin.
6. Reinstall the lower hinge on the opposite side.
7. Set the door on the lower door hinge. Reinstall the top hinge loosely and do not tighten.
8. Adjust the door so that it is straight. Once the door is in place correctly, tighten the screws.
Loading ...
Loading ...
Loading ...