Loading ...
Loading ...
Loading ...
33
CONTROLS AND SETTINGS
Drying cycle controls
(Start, Pause, and Cancel)
START
Press DRYER
START|PAUSE button
once to begin the drying
cycle. The unit will emit
one beep before the
drum begins to rotate.
The drying cycle
indicator lights
provide information
during the dry cycle.
The Close Dryer
Door advisory LED
will illuminate if the
dryer door is open.
Fully close the dryer
door before starting the dryer. The dryer will
not operate with the door open.
Drying cycle indicator lights
Dryer Setting Chart
These temperatures and water levels are available with the following cycles
Quick Dry
(25 min)
Delicates
(Auto dry)
Activewear
(Auto dry)
Normal
(Auto dry)
Bulky
(Auto dry)
Air Flu - no
heat(30 min)
90 min
60 min
30 min
15 min
Dry Temp (Drying Temperature)
High
Normal
Low
= Available selections. = Factory presets. = Non-modifiable presets.
PAUSE
Press DRYER
START|PAUSE button
while the dryer is running
to pause the drying cycle.
Opening the door with a cycle running
will also pause the cycle. You will hear
two beeps. Allow the drum to come to
a complete stop before reaching inside.
Press the DRYER START|PAUSE button
while paused to restart the drying cycle.
CANCEL
Press the DRYER CANCEL button to
cancel the drying cycle. Wait for the
drum to come to a complete stop before
reaching inside.
Chime
Press and hold the DRY Temp button for
3 seconds to mute or unmute the chime
(on some models). Once muted, the
sound from the button press and the end
of cycle reminder will both be muted.
The cycle status lights will illuminate as
each stage of the drying cycle is reached.
Stages include: Drying, Cooling, and Done.
NOTE
The Clean Lint Filter LED will illuminate after
each drying cycle as a reminder to clean
the lint lter. The lint lter must be cleaned
after every load. This is NOT a warning of a
clogged exhaust duct or lter. Open door or
press CANCEL to turn o the LED.
Loading ...
Loading ...
Loading ...