Loading ...
Loading ...
Loading ...
15
English
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB is activated to play at a preset
time.
1 Make sure that you have set the clock
correctly.
2 Press to switch the unit to standby.
Make sure that the clock is displayed
(see “Turn on” > “Switch to standby”).
3 Press and hold SLEEP/TIMER.
» A prompt to select the source is
displayed.
4 Press CD, or FM or USB to select a
source.
5 Press SLEEP/TIMER
» The clock digits are displayed and
begin to blink.
6 Press / to set the hour.
7 Press SLEEP/TIMER
8 Press / to set the minute.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1 Press to switch to standby mode.
2 Press SLEEP/TIMER repeatedly to activate
or deactivate timer.
» If timer is activated, the display shows
.
» If timer is deactivated, disappears on
the display.
Note
In MP3 link mode, the alarm timer cannot be set.
If disc/USB source is selected and the audio cannot be
played, tuner is activated automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
1 Tune to a radio station.
2 Press PROG/CLOCK SET to activate
program mode.
» [PROG] (program) begins to blink.
3 Press to allocate a number (1 to 20)
to this radio station, and then press PROG/
CLOCK SET
4 Repeat the previous steps to program
other stations.
Note
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
1 In FM mode, press to select a preset
number.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
Display RDS information
1 For a FM station with RDS, press RDS
repeatedly to display various broadcast
information.
EN
Loading ...
Loading ...
Loading ...