Loading ...
Loading ...
Loading ...
7
PROGRAMMING YOUR
COFFEEMAKER
TO SET THE TIME
Press and hold the Hour or Minute button.
The clock will begin flashing.
1. Set Hour: Press and hold the Hour button
to scroll through numbers quickly. When
desired number approaches, press and
release the button to advance one digit at
a time.
NOTE: When the number count passes 12,
PM will be displayed on the LCD. Be sure
the PM indicator is on if a PM time is
desired.
2. Set Minutes: Press and hold the Minute
button to scroll through numbers quickly.
When desired number approaches, press
and release the button to advance one
digit at a time. To finish setting time, simply
wait until the numbers stop flashing.
TO PROGRAM THE AUTO ON TIME
(brew start time)
1. Press and hold the PROG button until clock
begins to flash.
2. Set the time you want coffee to begin
brewing by using the Minute and Hour
buttons. Follow the same instructions you
used to set the time of day, in the
To Set the Time section.
3. Once desired Auto On time is set, Auto On
setting mode will be exited automatically.
4. To activate Auto On mode press the PROG
button and release. The green indicator
light will come on to remind you that the
programming function is in use. At the
programmed time, the green indicator light
will trun off and the red indicating light will
turn on, indicating that the brew cycle is
starting. The red light will go off when keep
Warm cycle ends.
NOTE: To reactivate the Auto On feature to
start brew cycle at the same time another
day, simply press the PROG button and
release. The green Auto On light will
illuminate.
TO PROGRAM THE VARIABLE
AUTO OFF TIME
1. Press and hold the Auto Off button until
clock begins to flash.
2. Program the coffeemaker to shut off from
zero to four hours after brew cycle is
finished by using the Hour and Minute
buttons (see To Set the Time).
3. Once Auto Off time is set, Auto Off mode
will be exited automatically.
1–4 CUP SETTING
The 1–4 cup setting button is used when you
make small amounts of coffee. The 1–4 cup
setting double-heats the water, making your
smaller amount piping hot.
1. When making a smaller amount, press the
1–4 button on the control panel after
turning on the unit. The indicator will light
when selected.
POWER LOSS BACK-UP SYSTEM
One-minute protection in case a breaker trips,
the unit is unplugged, or the power fails. It holds
all programmed information, including time of
day, auto on time and auto off time.
BEFORE BREWING YOUR
FIRST POT OF COFFEE
We recommend flushing out the system before
brewing your first pot of coffee. Simply fill the
reservoir and power on the unit, following steps
#2, #4 and #6 in BREWING COFFEE
instructions on the next page.
DO NOT ADD COFFEE!
Once you’ve done that, brew a pot of real coffee
and get ready to enjoy Cuisinart at its best!
Loading ...
Loading ...
Loading ...