Loading ...
Loading ...
Loading ...
en Operating the appliance
8
Control panel model 2
Setting the fan
Switching on
■ Touch the # symbol.
The fan starts at setting ƒ.
■ Slide your finger across the III settings range to
change the fan speed.
Switching off
Touch the
# symbol.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the @ symbol or slide your finger to the right
across control panel III until 2 appears in the display.
Note: After approx. 6minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
If you would like to stop intensive mode before the
preset time expires, slide your finger to the left across
control panel III to select the fan setting you require.
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the
= symbol.
Setting the brightness
Press and hold the = symbol until the desired
brightness is reached.
emotionLight Pro
The emotionLight Pro can be switched on and off
independently of the fan.
Touch the i symbol.
Setting the brightness
Press and hold the
i symbol until the required
brightness is reached.
Setting the colour
1. Switch off the fan.
2. Touch the i symbol.
3. Touch the A or @ symbol until the colour you require
is selected.
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
Boost function
Switching on
Touch the
& symbol.
Note: After approximately 20 seconds, the extractor
hood automatically switches back to the fan setting that
was set beforehand.
Switching off
If you want to end the Boost function before the preset
time expires, touch the
& symbol.
powerBoost position
On some appliances, the glass front can be adjusted to
an intermediate position (powerBoost position). The
powerBoost position can be used for eliminating
particularly strong cooking smells and large amounts of
steam.
Take hold of the glass front in the centre and open it
carefully.
Symbol Explanation
#
Fan on/off
=
Light on/off/dimming
i
emotionLight Pro
b Intensive mode
!
Automatic mode
A
Decrease fan setting
||| Control panel
@
Increase fan setting
Display Explanation
!
Metal grease filter saturation indicator
"
Activated charcoal filter saturation indicator
1-3 Fan settings
2
Intensive mode
x
Fan run-on
!
Automatic mode
D
Home Connect
Loading ...
Loading ...
Loading ...