Loading ...
Loading ...
Loading ...
Page 7 of 10
1. POWER BUTTON
Used to turn the tower fan ON and OFF.
2. SPEED BUTTON
Press to cycle through the three available fan speeds. Lo – Low Speed, M – Medium Speed, and
Hi – High Speed.
3. MODE BUTTON
Press to cycle through the modes.
Standard Mode: The fan will operate normally
Breeze Mode: The fan speed will vary to imitate a natural breeze.
Sleep Mode: The fan speed will be decrease by a level every 30 minutes, and once on low
will remain running at that speed.
4. TIMER BUTTON
Press repeatedly to increase the running time in 30-minute intervals. The timer can be set between
30 minutes and 7.5 hours.
5. SWING BUTTON
Press to turn the Swing function on and off. When it is operational the horizontal direction of the
airflow is slowly moved from side to side.
6. FAN SPEED INDICATOR
The corresponding light will illuminate to indicate the current fan speed. . I – Low Speed, II –
Medium Speed, and III – High Speed.
7. TIMER INDICATOR
When setting the timer add up the lights to determine the length of timer set. i.e. If the 1hr, 2hr,
and 4hr lights are illuminated the timer is set for 7 hours.
8. MODE INDICATOR
One light will illuminate to indicate the current mode which is operating.
REMOTE CONTROL
The Buttons on the remote have the same effect as the
buttons on the main control panel.
1
Power Button
2
Speed Button
3
Swing Button
4
Timer Button
5
Mode Button
The remote contains a button cell battery (CR2025)
1
2
3
4
5
Loading ...
Loading ...
Loading ...