Loading ...
Loading ...
Loading ...
- 9 -
Operating Your Wine Cooler
The Control Panel:
How to use the press-buttons on the Display Panel:
Press the POWER button for 3 seconds to turn on or off the unit.
To control the temperature, press UP or DOWN button. Each press would adjust the temperature by 1°C
between 5~18°C or 1°F between 40~66°F.
To turn on or off the internal LED lighting, press LIGHT button on the right side.
To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press LIGHT
button for 3 seconds.
To shut down inner light and control panel display light (button and display light), please press and hold both UP
& DOWN buttons for 3 seconds. The cooler will keep running normally. Re-press and hold both UP & DOWN
buttons for 3 seconds, the cooler will be restore to its normal status, with inner light and control panel light on.
When door is not closed within one minute after opening or is not properly closed, LED display will gleam and
cooler will beep as alarm. The alarm will stop when door is closed or any button is pressed.
Care And Maintenance
Cleaning your wine cooler
Unplug the wine cooler and remove the bottles.
Wash the inside with warm water or baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.
The outside of wine cooler should be cleaned with mild detergent or warm water.
Draw out the water box at the bottom, and wash it.
Moving your wine cooler
Remove all the bottles.
Securely tape down all loose items inside your wine cooler.
Turn the leveling legs up to the base to avoid damage.
Tape the door.
Be sure the wine cooler stays in the upright position during transportation.
Loading ...
Loading ...
Loading ...