Loading ...
Loading ...
Loading ...
EN
54
EN
• The batteries are designed for indoor use only. Never immerse them in water. The batteries must be handled with
care. Do not put batteries in your mouth. Do not let batteries touch other metal objects (rings, nails, screws, etc). You
must take care not to create short circuits in the batteries by inserting metal objects at their ends. If a short circuit
occurs, the battery temperature may rise dangerously and can cause serious burns or even catch re. If the batteries
leak, do not rub your eyes or any mucous membranes. Wash your hands and rinse your eyes with clean water. If the
discomfort persists, consult your doctor.
ENVIRONMENT
In accordance with existing regulation, any end-of-life appliances must be taken to an approved Service Centre
which will take responsibility for managing their disposal.
Think of the environment!
Your appliance contains many materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
PROBLEMS WITH YOUR APPLIANCE ?
Depending on model :
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The charger becomes hot.
This is perfectly normal. The va-
cuum cleaner can remain perma-
nently connected to the charger
without any risk.
The charger is connected but your
appliance is not charging.
The charger is not properly connec-
ted to the appliance or is faulty.
Check that the charger is properly
connected or contact an Approved
Services Centre to change the charger
.
Your appliance stops during ope-
ration and the light/s flash very
quickly.
Your appliance may be overheating.
Stop the appliance and leave cool
for at least 1 hour.
The appliance has stopped after the
charge light ashed.
The appliance has lost its charge. Recharge the vacuum cleaner.
The power-brush is not working
properly or makes a noise.
The rotating brush or hose are ob-
structed.
Stop the vacuum and
clean the parts.
The brush is worn.
Contact an Approved Service Centre
to change the brush.
The belt is worn.
Contact an Approved Service Centre
to change the belt.
The power-brush stops during use
of the vacuum cleaner.
The heat safety device
has come on.
Stop the vacuum cleaner. Check
that nothing is obstructing the rota-
tion of the brush; if there is an
obstruction, remove it and clean the
power-brush, then turn on
the vacuum cleaner.
Your vacuum cleaner suction is not
working properly or is making a
whistling noise.
The tube or hose is partially
blocked.
Unblock them the tube/hose.
The dust collector is full. Empty it and clean it.
The dust collector is not properly
tted.
Re-position it correctly.
The suction head is dirty.
Remove the power-brush
and clean it.
The foam motor protection
lter is full.
Clean it.
When charging the
vacuum cleaner, the light(s) ash
very quickly.
The correct charger is not being
used or the charger is faulty.
Talk to an Approved Service Centre
to change the charger.
Please keep this user manual.
Loading ...
Loading ...
Loading ...