Loading ...
Loading ...
Loading ...
14
|
SIDE BURNER ACCESSORY CARE & USE/INSTALLATION
Installation requires an outdoor 120VAC 15A GFI (Ground
Fault Interrupter) electrical outlet adjacent to the accessory.
The GFI outlet features an internal breaker that reduces
shock hazard. This type of outlet should be installed by a
qualified electrician either inside the island enclosure for
built-in units, or near the location where a free-standing unit
will be used.
For built-in accessories, the supplied 12V transformer is
connected to the accessory during installation.
If the electrical system fails to operate, a connection may
have come loose in shipping or the GFI may have tripped,
requiring a reset.
CONNECTING THE WIRING
The accessory electrical harnesses are designed to provide
power for both ignition and lighting. While ignition is
controlled at the accessory, lighting is controlled at the grill.
You can control lighting at the accessory by installing the
Lynx Accessory Light Switch (LASK).
Disconnect the 4-pin connector on the grill and connect
those plugs to the mating plugs on your accessory. (See
Index “Electrical Connections)
Important note: If using multiple Lynx accessories with the
Control Illumination/Blue LED’S, a connector for this
purpose is built into the accessory wiring. This will allow
you to use the light switch on your Lynx grill to actuate the
power on more than one accessory.
OPTIONAL ELECTRICAL KITS
Each accessory includes 6 feet of wiring (coiled inside the back of the accessory) to connect the accessory to a Lynx grill.
Additionally, Lynx manufactures 2 specialized electrical kits that you may purchase for your accessory, depending upon
how it will be installed. Each electrical kit ships with an instructional sheet for assembly. Assembly instructions and
schematics/drawings can also be found on our website at www.lynxgrills.com.
• LASK Lynx Accessory Switch Kit
• LPEK Lynx Power Extension Kit
This switch and transformer kit allows independent control of a Lynx accessory
burner without connection to a grill. The kit contains a transformer and mounting
bracket as well as a switch assembly with a mounting plate.
Lynx Power Extension Kit provides 12 feet of additional wire between your Lynx
Grill and accessory burner.
ELECTRICAL CONNECTIONS
Loading ...
Loading ...
Loading ...