Loading ...
Loading ...
Loading ...
22
Attention
● Certain USB devices may not be recognized when they are connected to the MP700.
● For display output connection of the MP700, from the third monitor on, connect monitors via DP.
● When disconnecting port cables, disconnect the RGB or RS232 port cables before disconnecting
the LAN or DP port cables.
● When using Eyefinity, we recommend that the same monitors are used.
● Because this version of OS does not include hotfixes and service packs, we recommend that you
install these separately.
● For UHD video playback, even if the video is played back on devices with the same specification,
playback performance may differ depending on the video compression methods, decoders, and
playback software used. To play back the videos in UHD resolution without problems, ask software
manufacturers for verified codecs. The latest version of a codec package is the most advantageous
for UHD playback support. If you wish to use a FFMPEG-based unified codec package, use one
created after September 2012. You can download unified codec packages such as Z codec and
K-Lite codec from the Internet.
Installation of K-Lite codec packages or recommended videos by FFMPEG-based playback software
MP700-Cxxx (i5-3610ME): Average bitrate 80Mbps (H.264/AVC/MPEG2)
MP700-Dxxx (i7-3610QE): Average bitrate 120Mbps (H.264/AVC/MPEG2)
● If you are unable to change the screen settings for Eyefinity, you can change them as follows.
1. Start AMD Catalyst. Select Advanced View from Preferences.
2. Restart "Create Eyefinity Display Group" on AMD Eyefinity Multi-Display.
3. Now you can see that all monitors are set to 1 on the Desktop Management tab of Catalyst.
Select monitors and set them to "Disable" "Extended mode".
4. Restart "Create Eyefinity Display Group".
● Refer to the link below for information on AMD Eyefinity settings.
http://support.amd.com/us/
kbarticles/Pages/gpu50-ati-eyefinity-display-groups.aspx
● If you wish to install additional programs on this device, we recommend you to install 64-bit
Windows-based programs. Otherwise, there may be compatibility issues.
● For the UHD DP connection, connect a cable that supports HBR2 or higher to the 'DP With HBR2'
port.
● To enjoy the multi-display function with the MP700, you must use the Catalyst Control Center. If you
extend your display through display settings in Windows, you may experience abnormal display,
such as video lagging or overlapping.
● Text may appear corrupted if you are using a program that does not support Unicode.
In this case, go to Start → Control Panel → Region and Language → Administrative → Language
for non-Unicode programs → Change system locale and select an appropriate option for your
country.
Please note that, depending on the program, this issue may not be solved with a settings change.
Loading ...
Loading ...
Loading ...