Loading ...
Loading ...
Loading ...
(258,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
! To adjust for compass zone
variance
S03AP110702
1. Select “COMPASS ZONE SELEC-
TION” using the center switch and press
the left switch.
2. Select your current location in the
display using the center switch and press
the left switch.
NOTE
If the button is not touched for 30
seconds, the compass zone variance
menu will finish.
! Compass calibration
S03AP110703
If the compass appears inaccurate, recali-
brate the compass.
1. Select “COMPASS CALIBRATION”
using the center switch and press the left
switch.
2. To start the Compass calibration, press
the center switch.
3. Once a “C” appears in the display,
slowly drive the vehicle in circles until
compass is calibrated.
! HomeLink
®
Wireless Control Sys-
tem
S03AP1108
The HomeLink
®
Wireless Control System
provides a convenient way to replace up to
three hand-held radio-frequency remotes
used to activate devices such as gate
operators, garage door openers, entry
door locks, security systems, and even
home lighting. The below steps are gen-
eric programming instructions; for Genie
and Sommer garage door openers, please
go directly to the HomeLink website.
Additional information and programming
videos can be found at
www.HomeLink.com/Subaru and
www.youtube.com/HomeLinkGentex.
CAUTION
. Before programming HomeLink
to a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage.
. When programming a garage
door opener, it is advised to park
outside of the garage.
. Do not use HomeLink with any
garage door opener that lacks
safety stop and reverse features,
as required by U.S. federal safety
Mirrors
256
Loading ...
Loading ...
Loading ...