Loading ...
Loading ...
Loading ...
6
Problem Cause Solution
Kettle not operating. No Power. Check kettle is plugged in.
Kettle unplugged. Check kettle is correctly
located to the powerbase.
Kettle not switching off Kettle overfilled. Check water level is not
automatically after above the Max level.
boiling/Long switch
off time. Lid not closed. Check lid is closed correctly.
Water splashing out of Filter not fitted in Always use the filter and do
spout area. spout area. not overfill above the Max
level.
Kettle switching on and Limescale/mineral Check that the element is free
off during use or build up on element from scale.
switching off before affecting operation. Refer to “descaling” section
water boiled. under care and cleaning.
Kettle stopped working Boil dry protection Switch off and remove from
during operation. operated due to the powerbase.
insufficient water in Allow to cool down before
the kettle. refilling.
When the kettle has cooled
down the switch will reset
itself.
Check the water level is
above the minimum level.
If none of the above solve the problem see “Service & Customer Care”.
troubleshooting guide
Loading ...
Loading ...
Loading ...