Loading ...
Loading ...
Loading ...
HomeConnect en
21
4. Follow the instructions in the
HomeConnectapp until the pro-
cess is complete.
a Once successfully connected, the
temperature display shows .
5. If the temperature display shows
, the appliance was able to es-
tablish a connection to the
HomeConnect app.
‒ In the HomeConnect app,
check whether the mobile
device is connected to the
WLAN home network (Wi-Fi).
‒ Repeat the process.
6. If the temperature display shows
, reset the HomeConnect set-
tings.
→"Resetting HomeConnectset-
tings", Page21
Installing the Home Connect
software update
The appliance searches for updates
to the HomeConnect software at reg-
ular intervals.
Note:If updates are available, the
temperature display shows .
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
1. Press .
a The temperature display shows .
2. Press repeatedly until the tem-
perature display shows .
3. Press .
a The temperature display shows an
animation.
a The update is installed.
a The controls are locked during the
installation.
a If the installation is successful, the
temperature display shows .
4. If the temperature display shows
, the appliance was unable to in-
stall the update.
‒ Repeat the process at a later
point.
5. If the update cannot be completed
after several attempts, contact the
After-sales service →Page30.
Resetting HomeConnectset-
tings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the HomeConnectsettings.
1. Press .
a The temperature display shows .
2. Press repeatedly until the tem-
perature display shows .
3. Press .
a The temperature display shows an
animation for 15seconds.
a The temperature display then
shows .
a The HomeConnectsettings have
been reset.
Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
Loading ...
Loading ...
Loading ...