Loading ...
Loading ...
Loading ...
Power
Press to “wake
up” the display. If the display is active, press to turn the dryer off.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
1
Control settings.
GEAppliances.ca
Normal/
Mixed Loads
For loads consisting
of cottons and poly-blends.
Cottons
For cottons and
most linens.
Delicates
For lingerie and
special-care fabrics.
Bulky/
Bedding
For large
coats, bed spreads, mattress covers, sleeping bags, blankets, comforters, jackets, small rugs,
and similar large and bulky items.
Perm Press/
Casuals
Clothing worn for
active sports exercise and some casual wear. Fabrics include new technology
finishes and stretch fibers such as Spandex. Also for clothing labeled Easy Care or Perma Press: For
wrinkle-free and permanent press items.
Quick Dry
For small loads
that are needed in a hurry, such as sports or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands.
Towels/
Sheets
Use for towels OR sheets. It is not
recommended to mix towels and sheets in the same load.
Steam Dewrinkle
Full Loads
Pr
ovides 20 minutes of steam drying to assist with dewrinkling clothes.
Ideal for loads left in dryer
for an extended time.
Warm Up
Provides 10 minutes of warming time to warm up clothes.
Air Fluff/
No Heat
Provides 10 minutes of tumbling time without heat.
Time Dry
Use to set your own dry time. Time Dry is also recommended for small loads. To use:
1. Turn dry cycle dial to Time Dry.
2. Increase the drying time by pressing the Add Time button.
Note: This button only increases the time. When max time is reached, pressing the button again
will reset the counter to the lowest setting.
3. Select the Temp.
4. Close the door.
5. Press Start/Pause.
Dry Cycles
The dry cycle
controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
2
5
Quick Start
1
Press
the
Power
button.
2
Select a dry
cycle. (Defaults are set
for each cycle. These default
settings can be changed. See
Control settings for more
information.)
3
Press the Start/Pause
button.
If the screen
is dark, a press
of the Power button will
“wake up” the display.
Loading ...
Loading ...
Loading ...