Loading ...
Loading ...
Loading ...
10
3. Fasten the cabinet to the window sill using two 5/8” round head screws. Pre-drill holes if
needed. Add the bottom rail seal over the screws.
Bottom
Rail Seal
5/8” Round Head Screw
TOP VIEW
Plastic
Frame
5/16” Long
Hex-Head Screw
Window Filler
Panel
Side
Retainer
Plastic
Frame
AC
Cabinet
“I” Section
Window
Filler Panel
Locking
Screw
Hole
Step 5: Install Support Brackets
1. Hold each support bracket flush against the outside of the window sill. Tighten each bracket
to the bottom of the cabinet as shown below. Mark the brackets at the top level of the
window sill and then remove.
Mark
Left
Right
Locknut
Sill Angle
Bracket
5/8” Long Flat Head Bolt
1/2” Long Flat Head
Bolt and Locknut
(2) required
for each support bracket
2. Assemble the sill angle brackets to the support brackets at the marked position as shown
below. Hand tighten, but not all the way for any changes that may be needed to be made
later during the installation.
Mark
Left
Right
Locknut
Sill Angle
Bracket
5/8” Long Flat Head Bolt
1/2” Long Flat Head
Bolt and Locknut
(2) required
for each support bracket
Loading ...
Loading ...
Loading ...