Loading ...
Loading ...
Loading ...
Black plate (326,1)
北米Model "A1170BE-C" EDITED: 2014/ 3/ 17
7-22
Starting and operating/Continuously variable transmission
1) Upshift indicator
2) Downshift indicator
3) Gear position indicator
When the manual mode is selected, the
gear position indicator and upshift indica-
tor and/or downshift indicator on the
combination meter illuminate.
The gear position indicator shows the
currently selected gear in the 1st-to-6th-
gear range. The upshift and downshift
indicators show when a gear shift i s
possible. When the upshift indicator “
”
illuminates, upshifting is possible. When
the downshift indicator “
” illuminates,
downshifting is possible. When both in-
dicators illuminate, upshifting and down-
shifting are both possible. When the
vehicle sto ps (for example, at traffic
signals), the downshift indicator turns off.
Gearshifts can be performed using the
shift paddle behind the steering wheel.
To upshift to the next higher gear position,
pull the shift paddle that has “+” indicated
on it. To downshift to the next lower gear
position, pull the shift paddle that has “–”
indicated on it.
To deselect the manual mode, return the
select lever to the “D” position from the “M”
position.
CAUTION
Do not place or hang anything on
the shift p addles. Doing so may
result in accidental gear shifting.
! Manual mode tips
Please read the following points carefully
and bear them in mind when using the
manual mode.
. If you attempt to shift down when the
engine speed is too high, i.e., when a
downshift would push t he tachometer
needle beyond the red zone, beeps will
be emitted to warn you that the downshift
is not possible.
. If you attempt to shift up when the
vehicle speed is too low, the transmission
will not respond.
. You can perform a skip-shift (for
example, from 4th to 2nd) by operating
the shift paddle twice in rapid succession.
. The transmission automatically selects
1st gear when the vehicle stops moving.
. If the temperature of the transmission
fluid becomes too high, the “AT OIL
TEMP” warning light on the combination
meter will illuminate. Immediately stop the
vehicle in a safe location and let the
engine idle until the warning light turns off.
Loading ...
Loading ...
Loading ...