Loading ...
Loading ...
Loading ...
19 EN
One-touch standby
When you press and hold
(Standby) on the
remote control, the home theater and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby
mode.
If one-touch standby is enabled on your home
theater, you can switch to standby with the
remote control of the TV or other HDMI-
CEC devices.
System Audio Control
When you play a device that has its audio
output routed to the home theater, the home
theater switches to the corresponding audio
source automatically.
To use one-touch audio, turn on System Audio
Control and follow the instructions on the TV
to map connected devices to the audio input
connectors of the home theater.
Audio Input Mapping
When you connect a new device to your
home theater, map the device to the audio
input connector (see 'Play audio from home
theater' on page 19).
Play audio from home theater
Play the audio from a connected device through
your home theater.
1 Press SETUP.
2 Select [Video Setup], and then press OK.
3 Select [HDMI Setup] > [EasyLink Setup]
> [System Audio Control] > [On], and
then press OK.
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
4 Select [HDMI Setup] > [EasyLink Setup]
> [Audio Input Mapping], and then press
OK.
5 Follow the instructions on the TV to map
the audio of the connected device to the
audio inputs on your home theater.
Loading ...
Loading ...
Loading ...