Loading ...
Loading ...
Loading ...
Care and Cleaning
35
Lift-Off Oven Door
The oven door is
removable, but it is
heavy. You may need help
removing and replacing
the door. Do not lift the
door by the handle. This
can cause the glass to
break or can cause
damage to the door.
To remove the door,
open it a few inches to the special stop position that
will hold the door open. Grasp firmly on each side
and lift the door straight up and off the hinges.
NOTE:
• Be careful not to place hands between the hinge
and the oven door frame.
• While working in the oven area, cover the hinges
with towels or empty paper towel rolls to prevent
pinched fingers.
To replace the door, make sure the hinges are in the
special stop position. Position the slots in the bottom
of the door squarely over the hinges. Then lower the
door slowly and evenly over both hinges at the same
time. If hinges snap back towards the oven frame, pull
them back out.
TO CLEAN THE DOOR:
Inside of the door:
• Because the area inside the gasket is cleaned during
the self-clean cycle, you do not need to clean this by
hand. Any soap left on the liner causes additional
stains when the oven is heated.
• The area outside the gasket can be cleaned with a
soap-filled scouring pad.
• Do not rub or clean the door gasket—the fiberglass
material of the gasket has an extremely low
resistance to abrasion. An intact and well-fitting
oven door gasket is essential for energy-efficient
oven operation and good baking results. If you
notice the gasket becoming worn, frayed or damaged
in any way or if it has become displaced on the door,
you should have it replaced.
NOTE: The gasket is designed with a gap at the
bottom to allow for proper air circulation.
Outside of the door:
• Use soap and water to thoroughly clean the top,
sides and front of the oven door. Rinse well. You
may also use a glass cleaner to clean the glass on
the outside of the door.
(continued next page)
Inside gasket
Gasket
Outside gasket
Loading ...
Loading ...
Loading ...