Loading ...
Loading ...
Loading ...
7
OPERATION
Press the POWER button to turn the unit ON or OFF.
Press the MODE button to cycle between the 5 modes, the indicator for the selected mode will be
illuminated.
COOL: The room is cooled with the cold air expelled through the front air outlet while hot air is
expelled through the vent pipe. The desired room temperature can be set between 17 and 30 degrees
using the + and – buttons, and the fan speed can be changed using the SPEED button.
HEAT: The room is heated with the warm air expelled through the front air outlet while cold air is
expelled through the vent pipe. The desired room temperature can be set between 16 and 32 degrees
using the + and – buttons, and the fan speed can be changed using the SPEED button. We advise for
continuous drainage to be set up in HEAT mode.
FAN (AIR PURIFIER): The fan speed can be changed pressing the SPEED button. When used with the
optional HEPA filter, the appliance will work as an effective air purifier.
DRY (DEHUMIDIFY): Should be operated without the vent hose, but with continuous drainage to
remove moisture from the air. The display will show dH while in dry mode. The fan speed is set to low
and is not adjustable.
SMART COOL: An intelligent cooling mode where the fan speed is automatically adjusted based on the
amount of cooling required. Attempts to change the fan speed will move the unit into COOL mode.
Repeatedly press the SPEED button to cycle through the five fan speeds. Each time the SPEED button
is pressed, the fan speed will be displayed. The fan speed can be changed between F1 (Low) to F5
(High). The LED indicators will also illuminate to show the fan speed as below:
F1 –Low, F2 – Low and Mid, F3 – Mid, F4 – Mid and High, F5 – High.
The fan speed cannot be changed in SMARTCOOL and DRY modes.
Press to enter sleep mode. The sleep indicator will be illumined and all other indicators will be turned
off. In sleep mode, the appliance works at low fan speed. Press SLEEP again to exit sleep mode.
The SLEEP button is also used to set up the WIFI function. See the WIFI SMART CONTROL section for
further information.
The timer functions cannot be combined or repeated.
POWER ON TIMER
With the appliance in standby, press the TIMER button to set the power-on timer. Use the + and -
buttons to adjust the duration of the timer (1 to 24 hours). The Timer indicator will turn on and the
unit will start after the selected number of hours.
POWER OFF TIMER
With the appliance running with the desired settings, press the TIMER button to set the power-off
timer. Use the + and - buttons to adjust the duration of the timer (1 to 24 hours). The timer indicator
will illuminate and the unit will stop after selected number of hours.
Used to adjust temperature in HEAT/COOL/SMART COOL modes and to set the duration of the TIMER.
The buttons are not used in FAN or DRY modes. Press both buttons together to change between
displaying the temperature in Celsius and Fahrenheit.
Press this button to enable the swing function. The louvres will slowly move from side to side. If
swing is pressed again the louvres will stop in their current position. Press and hold the SWING
button for 3 seconds to turn the indicator lights on or off.
Loading ...
Loading ...
Loading ...