Installation Manual - Page 8

a. Locate and mark the centers of the wall studs using a stud finder.

b. After aligning the wall mounting bracket on the wall where the center of the wood stud is marked, mark the location of the screws

and then remove the wall mounting bracket. (Use a level to make sure your screw marks are level.)

c. Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm(2.9 Inches) or above where the wall mounting screw location is

marked on the wall. (

d. Tighten the wall mounting screws for the wall bracket on the drilled hole.

→ At this time, tighten the screw so that the wall, wall mounting bracket and the wall mounting screw are pressed against one another.