Loading ...
Loading ...
Loading ...
Page 21 | e110 & e112
WARNING
WARNING! TURN OFF THE E-SUB(S) AND ALL OTHER EQUIPMENT IN THE
SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
CH. 2
(
R
)
Grounded
Isolated
CH. 1
(
L
)
HIGH LEVEL INPUTS
LINE
OUTPUTS
LL
RR
LINE
INPUTS
R
R
L
L
INPUTS
SATELLITE AMPLIFIER
TO SATELLITE
SPEAKERS
(L) (R)
E-SUB REAR PANEL
+
–
+
–
SPEAKER OUTPUTS
PRE-AMPLIFIER
R L
OUTPUTS
E-SUB TOP CONTROL PANEL
SYSTEM CONNECTION DIAGRAM 3:
One E-Sub in Mono to
Two-Channel Audio System
When connecting a single E-Sub in
mono to a two-channel audio system you
will use both the “Le” and the “Right”
“Line Inputs” of the E-Sub and you will
engage the E-Sub’s active crossover
by selecting the “on” position on the
“Crossover” switch located on the top
control panel.
e internal active crossover will apply
low-pass ltering to feed the subwoofer’s
internal amplier with a summed L+R
signal. It will also high-pass lter the input
signal and send it to the satellite amplier
via the “Line Outputs” jacks. is creates
a true two-way crossover that greatly
improves the overall performance of your
audio system by preventing the subwoofer
and satellite speakers from playing the
same frequency range, and by liberating
the satellite amplier and speakers from
the burden of reproducing power hungry,
distortion-inducing low-frequencies.
Use good-quality audio interconnect
cables with RCA-type connectors to make
these connections.
Loading ...
Loading ...
Loading ...