Loading ...
Loading ...
Loading ...
8
INSTALLING THE HOB
• Remove the pan supports, the burner lid and flame spreader. Carefully turn the
appliance upside down and place it on a cushioned area to avoid damage.
• Take care that the ignition devices and flame supervision devices are not damaged in
this operation.
• Apply the sponge provided around the edge of the appliance.
• Do not leave a gap in the sealing agent.
NOTE: The thickness of the sponge is 3mm and the width is 10mm.
IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will
make it difficult to remove the appliance in the future if maintenance is needed.
ELECTRICAL CONNECTION
This appliance must be earthed.
This appliance is designed to be connected to a 220-240V, 50/60Hz AC electrical supply.
The wires in the mains lead follow the color code of:
Green/ Yellow = Earth
Blue = Neutral
Brown = Live
NOTE: The earth wire must be connected to the
terminal with this symbol or the letter E.
Loading ...
Loading ...
Loading ...