Loading ...
Loading ...
Loading ...
en Programme settings
26
--------
Fine adjust 5
5 5
5 5 5
If you think the laundry is still too damp when the drying pro-
gramme has ended, you can adjust the degree of dryness to
achieve a particular dryness level. To increase the dryness level,
set the degree of dryness to between 5 and 5 5 5. This will
extend the programme duration but the temperature will remain
the same.
Once you have adjusted the degree of dryness for a pro-
gramme, this setting will be retained for the programme even
after the appliance has been switched off.
Finished in ‚ - ƒ… Before starting the programme, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
1. Select a programme.
The programme duration will be displayed for the selected
programme, e.g. ‚:…† (hours:minutes).
2. Press Finished in repeatedly until the required number of
hours is displayed.
Note: Use the Finished in + button to increase the set-
ting values, and the Finished in – button to reduce them.
3. Press Start/Pause A.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g. ‰) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note: The programme duration is included in the "Ready in"
time.
E.g.
\ ‹ : …‹
The drying time for timed programmes can be extended to up
to 3 hours 30 minutes in 10-minute increments.
Loading ...
Loading ...
Loading ...