Loading ...
Loading ...
Loading ...
Operating your Convector Heater
Check that the heat control switch is set to Off position before plugging the heater into
the mains supply. For greater economy, use the High Heat setting initially and then
switch to the Low Heat setting.
HEAT CONTROL SWITCH
The control switch positions are:
O Off
I Low Heat (800W)
II High Heat (1200W)
I+II Max Heat (800W+1200W)
TURBO SWITCH
In addition to the three heat settings there is a fan with a separate On/Off switch
located on the control panel. The fan function is for distributing heat into the room at
a faster rate.
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach
the maximum position.
2. When the room reaches a temperature that is comfortable
for you, slowly turn the knob anti-clockwise until the heater
just turns off (you will hear a click).
3. The heater will now cycle on and off to maintain the comfort
level you have set.
4. Take note of this setting position for future use.
Loading ...
Loading ...
Loading ...