Loading ...
Loading ...
Loading ...
5
Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically
after 6 seconds or press
OK to remove immediately.
POWER button
Press to turn on/off the TV from or to
standby mode.
The power is never turn off completely unless
it is physically unplugged.
AV button
Press this button repeatedly to select
AV1, AV2, AV3, HDMI, SIDE or TV
when in TV mode, according to where you
connected the accessory devices
(p. 21).
and button
Multimedia browser functional buttons
(p.25).
DEMO button
Demo menu on/off. See p. 9.
CLOCK button
On/off and Time display (for max. 10
minutes)
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen.
*GUIDE button
Displays the Electronic Program Guide in
digital mode.
MY CONTENT button
"My Content" menu on/off, see p. 6.
MENU button
Settings menu on/off, see p. 9.
Cursor buttons
Press the cursor buttons up/down, left/
right to navigate through the menus.
VOL +/– button
Press + or - to adjust the volume.
NUMERIC (0-9) buttons
To select TV channels or enter values in
the on-screen menu. For single channel
entries, press the numbered button for the
channel you desire. The TV will pause for
a second or two before changing to the
chosen channel.
DOT button
To enter values for minor channels e.g.
36.4
A/CH
Press to alternate between the currently
viewed channel and the previously view
ed
channel
.
Use of the remote control
* The quality and accuracy of the
information on the program guide
and information banner are trans-
mitted from broadcasters. You may
see a difference in broadcast time if
the broadcaster is from a different
time zone area.
FORMAT
Press this button to display a list of
available display formats (depending on
the receiving signal). This lets you choose
the display format of your preference.
Press this button repeatedly to select
another picture format: Automatic, Super
Zoom, 4:3, Movie expand 14:9, Movie
expand 16:9, 16:9 subtitle, Wide screen.
Automatic makes the picture fill the
screen as much as possible.
Super zoom removes the black bars on
the sides of 4:3 programs with minimal
distortion.
When in Movie expand 14:9, Movie
expand 16:9 or Super zoom picture
format, you can make subtitles visible with
the cursor up/down.
Note: With HD sources not all screen formats
will be available.
*INFO
Display information: Press to display
(when available) information about the
selected TV channel and program or
accessory device.
OK - to activate a setting
- to display the list of channels stored
(according to the selection made in
the Installation mode (Antenna or
Cable), p. 7.
CH +/– Channel selection button
- To browse through the TV channels or
sources stored in the preferred channel
list (see p. 20).
- To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 7.
Note: You don’t have to start the installation
again once you have searched for and stored
the available TV channels.
MUTE button
Interrupt the sound or restore it.
Loading ...
Loading ...
Loading ...