Loading ...
Loading ...
Loading ...
Before using for the first time en
31
Before using for the first time
Before using for the
first time
Prepare the appliance for use.
Installing the appliance
1. Place the handle onto the the hose
and lock it in place.
→Fig.
3
2. Engage the hose adapter into the
air-intake opening in the lid.
→Fig.
4
3. Connect the handle to the tele-
scopic tube.
4. Connect the telescopic tube to the
floor nozzle.
→Fig.
5
5. Place the accessory support
1
onto
the telescopic tube.
→Fig.
6
6. Place the crevice nozzle
1
from the
bottom onto the accessory support
1
.
→Fig.
6
7. Place the brush ring
1
onto the up-
holstery nozzle
1
.
→Fig.
7
8. Place the upholstery nozzle
1
with
the brush ring
1
from above onto
the accessory holder
1
.
→Fig.
6
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Setting the telescopic tube
1. Unlock the telescopic tube.
2. Set the required length of the tele-
scopic tube.
→Fig.
8
Switching on the appliance
1. Hold the mains plug and pull it out
to the required length.
2. Insert the mains plug into the
socket.
3. Press .
→Fig.
9
Switching off the appliance
1. Press .
2. Unplug the mains plug.
3. Briefly pull on the mains cable and
then let go.
a The power cord retracts automatic-
ally.
Transporting the appliance
1. Switch off the appliance.
2. Stand the appliance upright on its
end.
3. Slide the catch on the floor tool
into the groove on the underside of
the vacuum cleaner.
→Fig.
10
4. To overcome obstacles, transport
the appliance by the handle.
Controlling the power
1
You can control the setting continu-
ously.
1. Turn the power control to the re-
quired setting.
→"Overview of the controls",
Page30
2. Turn the telescopic tube with air
flow regulator to the required posi-
tion.
→Fig.
11
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...