Loading ...
My handset displays [Searching] or
[Unavailable] , or [Unregistered] , what do I
do?
Make sure that the base station has power supply.
The handset is out of range. Move it closer to the
base station.
The handset is not paired with the base. Register
the handset to the base station.
If I fail to pair (register) the handset or
additional handsets to the base station,
what do I do?
Your base memory is full. Access
>
[Services] > [Unregister] to unregister the
unused handsets and try again.
If registration fails, unplug the power adapter from
the base station and plug it back. Wait for 15 seconds,
and then repeat the registration procedure.
I have chosen a wrong country in Welcome
screen, what do I do?
Reset your phone settings to the original factory
settings (see the section on “Restore default settings”).
I have chosen a wrong language which I
cannot read, what do I do?
1 Press
to go back to the standby screen.
2 Press
to access the main menu screen.
3 The following options will appear on the screen:
[Phone setup] > [Language]
> [Idioma]
[Telefon-Setup] > [Sprache]
[Réglages] > [Langue]
4 Select them to access the language options.
5 Select your own language.
The handset loses connection with the
base or the sound interrupts during a call.
The handset is nearly out of range. Move it closer
to the base station.
Re-register the handset to the base station.
The battery discharges too fast.
The battery is not fully recharged. Leave the
handset on the charging cradle for at least
8 hours or until the battery icon on the handset
stops scrolling and indicates full bar.
The batteries are old or defective. Purchase and
replace with new rechargeable batteries with the
increase the standby time.
Bad audio (crackles, echo, etc.)
The handset is nearly out of range. Move it closer
to the base station.
The phone receives interference from the nearby
electrical appliances. Move the base station
away from them.
The phone is at a location with thick walls. Move
the base away from them.
The phone receives interference from the DSL
(digital subscriber line) connection. Install a DSL
Copyright © MMD Hong Kong Holding Limited
2019. All rights reserved.
This product has been manufactured
by and is sold under the responsibility
of MMD Hong Kong Holding Limited and
MMD Hong Kong Holding Limited is the warrantor in
relation to this product.
Philips and the Philips Shield Emblem
are registered trademarks of Koninklijke
Philips N.V. and are used under license.
UMS_M350-355_EN_ V1.0
This symbol on a
product means that
the product is
covered by European
Directive 2012/19/EU.
Frequently asked questions
www.philips.com/support
To access the user instructions online, use the
reference model number written on the product
label at the bottom of the base station.
Technical
data
Battery
Philips: 2 x AAA NiMH 1.2 V Rechargeable 300 mAh
batteries
Use only the supplied batteries.
Adapter (base and charger)
Input: Output:
SPPS:
SSY050050-EU
100-240 V
~
50/60 Hz 200 mA
5 Vdc
500 mA
Alternative power source
Power bank: output: 5 Vdc 500 mA (minimum)
Phonebook with 50 entries
Call log with 20 entries
Talk time: 10 hours
Standby time: 180 hours
RF output power: < 24 dBm
Frequency band: 1880 MHz
~
1900 MHz
Note
www.p4c.philips.com.
4
Enjoy
Phonebook
Add record
1 Press
.
2 Select [Phonebook] > [Add new] .
3 Follow on-screen instructions.
Call from the phonebook
1 Press
.
2 Select a record and press
.
Call from the direct access memory
Press and hold on the keys in standby mode. The
availaibility of direct access memory is country
dependent.
Call log
Call from the call log
1 Press
.
2 Select a record and press
.
Save record
1 Press
.
2 Select a record and press
> [Save number] .
3 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press
.
2 Select a record and press
.
Save record
1 Press
.
2 Select a record and press
> [Save number] .
3 Follow on-screen instructions.
Telephone answering
machine (for M355 only)
1 Press
> [Answ. machine] > .
2 Follow on-screen instructions.
[On] > [Answer only] means the answering
machine is on. Calls are only answered,
messages are not recorded.
[On] > [Answer & rec.] means the answering
machine is on. Calls are answered and
messages are recorded.
Listen to the incoming messages
Press
> [Answ. machine] > [Play] .
Register the handset or
additional handsets
You can register additional handsets to the base
station.
1 Press
on the handset.
2 Select [Services] > [Register] , then press
3 Press and hold
on the base station for
10 seconds.
4 Enter the system PIN/passcode (0000).
5 Press
»
Registration is complete in less than
2 minutes.
Note
The preset PIN is 0000.
The handset and the base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take
the line, make a call and receive a call. The
advanced features may not be available if
you use them with other makes. To register
the handset to another GAP-compliant base
station, follow the registration procedure of
that base station.
Restore default settings
You can reset your phone settings to the original
factory settings, and recall the orig
inal PIN/
passcode.
1 Press
.
2 Select [Services] > [Reset] , then press
to
3 Follow on-screen instructions.