Loading ...
Loading ...
Loading ...
Installation
51
Fitting the supplied wall
spacers
The wall spacers supplied must be
used in order to achieve the stated
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures.
Appliance depth is increased by
approx. 35mm with the wall spacers
fitted. If the wall spacers are not used,
the functionality of the appliance is not
affected. However, energy
consumption is slightly increased with
less distance between the appliance
and the wall.
Fit the wall spacers onto the back of
the appliance on the top left and
right.
Installation
Two people are required for
installing the appliance.
The appliance must be empty
when it is installed.
Move the appliance carefully on
floors that are sensitive to scratching
to prevent damage.
For easier installation there are
transport handles on the back at the
top and transport wheels underneath
the appliance.
Prepare the appliance for installation
as close as possible to its intended
installation location.
Release the mains connection cable
from the back of the appliance.
Remove the cable clip from the back
of the appliance.
Move the appliance carefully to its
intended installation location.
Position the appliance with the wall
spacers (if used) or the back close to
the wall.
Supporting the appliance door
Ensure that you unscrew the
adjustable foot from the lower
hinge plate with the enclosed
spanner until it sits on the floor. Then
unscrew the foot by a further ¼turn.
Loading ...
Loading ...
Loading ...