Loading ...
Loading ...
Loading ...
4 Wind the mains cord around the cord winding area and x
it with the cord clip. Put the mains cord below the CordFix
indication to ensure the mains cord does not touch the hot
soleplate during storage.
5 Store the iron on its heel in a safe and dry place.
Troubleshooting
This chapter summarises the most common problems you
could have with the appliance. If you are unable to solve the
problem with the information below, visit www.philips.com/
support for a list of frequently asked questions or contact the
Consumer Care Centre in your country.
Problem Possible cause Solution
The iron cannot
remove wrinkles
from the garment.
There is no steam during
ironing.
Put water inside the water tank. Set
the steam slider to MAX.
Water drips from
the soleplate after
the iron has been
unplugged or has
been stored.
The steam slider is set to
MAX.
Set the steam slider to ‘no steam’.
You have put the iron in
horizontal position with
water still left in the water
tank.
Empty the water tank.
The light on the
iron is amber
instead of blue,
and keeps ashing.
The Calc-Clean reminder
light has been activated.
This is a regular reminder
for you to descale the
appliance.
Perform the Calc-Clean process
(see chapter ‘Cleaning and
maintenance’, section ‘Calc-Clean
System’).
The SmartLight
pulsates slowly.
The Safety Auto-o mode
is active. The iron has
switched to standby mode
(see chapter ‘Safety Auto-
o’).
Move the iron to reactivate it.
The iron starts heating up again.
Start ironing again only when the
SmartLight lights up steadily.
ENGLISH12
Loading ...
Loading ...
Loading ...