Loading ...
Loading ...
Loading ...
©2019 Hestan Commercial Corporation
10
EN
LOCATING AND ASSEMBLING THE GRILL
LOCATION
When determining a suitable location for your grill, take into account concerns such as exposure
to wind, rain, sprinklers, proximity to traffic paths, and keeping any gas supply line runs as short as
possible.
Locate the grill only in a well-ventilated area. Never locate the grill in a building, garage,
breezeway, shed or other such enclosed areas without an approved ventilation system. Never
locate the grill over, under, or next to unprotected combustible construction.
AIRFLOW / WINDY AREAS
During heavy use, the grill will produce a lot of heat and smoke. The grill is designed to take in cool
air at the front control panel area, and send the combustion products and smoke out the exhaust
gap at the rear of the hood. IT IS IMPORTANT TO MAINTAIN THIS FLOW AT ALL TIMES.
Using the grill in windy areas can disrupt the proper flow and cause damage to your grill, or result
in burn hazards to the user. Initial indications of this situation are very hot control knobs. If this
happen, use an oven mitt or other protection, and while keeping your face away, immediately open
the hood to release the built up heat inside the grill. Turn down the burners to a lower setting. If
you have a free-standing grill on a cart, re-orient the grill so the prevailing wind is toward the front
of the grill as seen below in Fig. 1.
For built-in grill installations which consistenly receive wind at the rear of the grill, a Wind Screen
accessory is available from Hestan. Contact your Hestan dealer for details.
Damage caused from use in windy conditions, such as melted knobs
and/or wiring, discoloration of the control panel, etc., is excluded from
warranty coverage.
OTHER CONSIDERATIONS
When installing a grill or other gas appliance into an enclosure (island), the enclosure must be
constructed with ventilation openings to avoid accumulation of gas should there be a leak. See the
INSTALLATION section of this manual for details.
Ensure all packaging, straps, etc. have been removed from the grill. Remove any tie-down wires
from the burners.
Your Hestan grill has provision for mounting onto a mobile cart if you choose to do so. Contact
your Hestan dealer for the appropriate cart for your grill. If your grill is mounted on a cart, engage
the brakes on the casters to prevent movement of the cart.
Figure 1
Loading ...
Loading ...
Loading ...