Guía del usuario
G4011
Alguna de los contenidos de este manual puede tener variaciones con el telefono
dependiendo del software o de proveedor de servicio.
G4011 User Guide
P/N : MMBB0110801
(
1.0
)
G4011
User Guide
Some of contents in this manual may differ from your phone depending on the
software of the phone or your service provider.
6. This limited warranty is in lieu of all other warranties, express or
implied either in fact or by operations of law, statutory or otherwise,
including, but not limited to any implied warranty of marketability or
fitness for a particular use.
7. Damage resulting from use of any non-LG approved accessory. Use
of any non-LG approved accessory immediately voids this warranty
and LG shall not be responsible for any incidental, consequential,
special, or any other damage resulting from the use of any non-LG
approved accessory.
8. All plastic surfaces and all other externally exposed parts that are
scratched or damaged due to normal customer use.
9. Products operated outside published maximum ratings.
10. Products used or obtained in a rental program.
11. Consumables (such as fuses).
3. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE DURATION
OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT,
INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
Some countries do not allow the exclusive of limitation of incidental or
consequential damages or limitations on how long an implied warranty
lasts; so these limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may also have other
rights, which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following telephone number
from anywhere in the continental United States:
Tel. 1-800-793-8896 Fax. 1-800-448-4026
www.LGmobilephones.com
1. WHAT THIS WARRANTY COVERS
LG offers you a limited warranty that the enclosed subscriber unit and its
enclosed accessories will be free from defects in material and
workmanship, according to the following terms and conditions:
1. The limited warranty for the product extends for ONE (1) year
beginning on the date of purchase of the product.
2. The limited warranty extends only to the original purchaser of the
product and is not assignable or transferable to any subsequent
purchaser/end user.
3. This warranty is good only to the original purchaser of the product
during the warranty period, but limited to certain countries if specified.
4. The external housing and cosmetic parts shall be free of defects at the
time of shipment and, therefore, shall not be covered under these
limited warranty terms.
5. Upon request from LG, the consumer must provide acceptable
information to prove the date of purchase.
6. The customer shall bear the cost of shipping the product to the
Customer Service Department of LG. LG shall bear the cost of
shipping the product back to the consumer after the completion of
service under this limited warranty.
2. WHAT THIS WARRANTY DOES NOT COVER
1. Defects or damages resulting from use of the product in other than its
normal and customary manner.
2. Defects or damages from abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of LG, including damage caused by shipping,
blown fuses, and spills of food or liquid.
3. Breakage or damage to antennas unless caused directly by defects in
material or workmanship.
4. The Customer Service Department at LG must be notified by
consumer of the alleged defect or malfunction of the product during
the applicable limited warranty period for the warranty to apply.
5. Products which have had the serial number removed or made
illegible.
LIMITED WARRANTY STATEMENT
6. This limited warranty is in lieu of all other warranties, express or
implied either in fact or by operations of law, statutory or otherwise,
including, but not limited to any implied warranty of marketability or
fitness for a particular use.
7. Damage resulting from use of any non-LG approved accessory. Use
of any non-LG approved accessory immediately voids this warranty
and LG shall not be responsible for any incidental, consequential,
special, or any other damage resulting from the use of any non-LG
approved accessory.
8. All plastic surfaces and all other externally exposed parts that are
scratched or damaged due to normal customer use.
9. Products operated outside published maximum ratings.
10. Products used or obtained in a rental program.
11. Consumables (such as fuses).
3. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE DURATION
OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT,
INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
Some countries do not allow the exclusive of limitation of incidental or
consequential damages or limitations on how long an implied warranty
lasts; so these limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may also have other
rights, which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following telephone number
from anywhere in the continental United States:
Tel. 1-800-793-8896 Fax. 1-800-448-4026
www.LGmobilephones.com
1. WHAT THIS WARRANTY COVERS
LG offers you a limited warranty that the enclosed subscriber unit and its
enclosed accessories will be free from defects in material and
workmanship, according to the following terms and conditions:
1. The limited warranty for the product extends for ONE (1) year
beginning on the date of purchase of the product.
2. The limited warranty extends only to the original purchaser of the
product and is not assignable or transferable to any subsequent
purchaser/end user.
3. This warranty is good only to the original purchaser of the product
during the warranty period, but limited to certain countries if specified.
4. The external housing and cosmetic parts shall be free of defects at the
time of shipment and, therefore, shall not be covered under these
limited warranty terms.
5. Upon request from LG, the consumer must provide acceptable
information to prove the date of purchase.
6. The customer shall bear the cost of shipping the product to the
Customer Service Department of LG. LG shall bear the cost of
shipping the product back to the consumer after the completion of
service under this limited warranty.
2. WHAT THIS WARRANTY DOES NOT COVER
1. Defects or damages resulting from use of the product in other than its
normal and customary manner.
2. Defects or damages from abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of LG, including damage caused by shipping,
blown fuses, and spills of food or liquid.
3. Breakage or damage to antennas unless caused directly by defects in
material or workmanship.
4. The Customer Service Department at LG must be notified by
consumer of the alleged defect or malfunction of the product during
the applicable limited warranty period for the warranty to apply.
5. Products which have had the serial number removed or made
illegible.
LIMITED WARRANTY STATEMENT
G4011
User Guide
Unpacking 8
For Your Safety
9
Your Phone
14
Phone Components 14
Your Phone’s Features
15
Display Information
17
Getting Started 18
Using the Battery,
Charger and SIM Card
18
Installing the Battery
18
Removing the Battery
18
Charging the Battery
19
Disconnecting the Charger
19
Installing the SIM Card
20
Turning Your
Phone On and Off 21
Turning Your Phone On
21
Turning Your Phone Off
22
Access Codes
22
Security code
22
Barring Password
22
General Functions 23
Making and
Answering Calls
23
Making a Call
23
Making a Call by Send Key
23
Making International Calls 23
Ending a Call
23
Making a Call
From the Phonebook
24
Adjusting the Volume
24
Answering a Call
24
Manner Mode (Quick)
25
Signal Strength
25
Entering Text
25
Phonebook
29
In-Call Menu
29
During a Call
29
Making a Second Call
29
Swapping
Between Two Calls
29
Answering an Incoming Call
30
Rejecting an Incoming Call
30
Muting the Microphone
30
Switching DTMF
Tones on During a Call
30
Multiparty or
Conference Calls 31
Making a Second Call
31
Setting Up a
Conference Call
31
Activate the
Conference Call on Hold
31
Adding Calls to the
Conference Call
31
5
4
Displaying Callers in a
Conference Call
32
Private Call in a
Conference Call
32
Ending a Conference Call
32
Menu Tree 33
Selecting
Functions and Options
36
Messages
37
Text Messages 37
Write Message
37
Inbox
38
Outbox
39
Draft
39
Settings
40
Delete All
40
Voice Messages
41
Listen to Voice Messages
41
Voice Mailbox Number
41
Info Service
41
Receive
41
Inbox
42
Topics
42
Alert
42
Auto Display
42
Languages
42
Templates
43
Name Card 43
Check Memory
43
Call Register 44
Missed Calls 44
Received Calls
44
Dialed Calls
44
Delete Recent Calls
45
Call Durations
45
Last Call
45
Received Calls
45
Dialed Calls
45
All Calls
45
GPRS Information
46
WAP Information
46
External Device
46
Total Data
46
Profiles 47
Settings
48
Alarm Clock 48
Date & Time Settings
49
Date & Time
49
Auto Update
49
Phone Settings
50
Display Settings
50
Power on Sound
50
Languages
51
LED indicator
51
Table of Contents
Unpacking 8
For Your Safety
9
Your Phone
14
Phone Components 14
Your Phone’s Features
15
Display Information
17
Getting Started 18
Using the Battery,
Charger and SIM Card
18
Installing the Battery
18
Removing the Battery
18
Charging the Battery
19
Disconnecting the Charger
19
Installing the SIM Card
20
Turning Your
Phone On and Off 21
Turning Your Phone On
21
Turning Your Phone Off
22
Access Codes
22
Security code
22
Barring Password
22
General Functions 23
Making and
Answering Calls
23
Making a Call
23
Making a Call by Send Key
23
Making International Calls 23
Ending a Call
23
Making a Call
From the Phonebook
24
Adjusting the Volume
24
Answering a Call
24
Manner Mode (Quick)
25
Signal Strength
25
Entering Text
25
Phonebook
29
In-Call Menu
29
During a Call
29
Making a Second Call
29
Swapping
Between Two Calls
29
Answering an Incoming Call
30
Rejecting an Incoming Call
30
Muting the Microphone
30
Switching DTMF
Tones on During a Call
30
Multiparty or
Conference Calls 31
Making a Second Call
31
Setting Up a
Conference Call
31
Activate the
Conference Call on Hold
31
Adding Calls to the
Conference Call
31
5
4
Displaying Callers in a
Conference Call
32
Private Call in a
Conference Call
32
Ending a Conference Call
32
Menu Tree 33
Selecting
Functions and Options
36
Messages
37
Text Messages 37
Write Message
37
Inbox
38
Outbox
39
Draft
39
Settings
40
Delete All
40
Voice Messages
41
Listen to Voice Messages
41
Voice Mailbox Number
41
Info Service
41
Receive
41
Inbox
42
Topics
42
Alert
42
Auto Display
42
Languages
42
Templates
43
Name Card 43
Check Memory
43
Call Register 44
Missed Calls 44
Received Calls
44
Dialed Calls
44
Delete Recent Calls
45
Call Durations
45
Last Call
45
Received Calls
45
Dialed Calls
45
All Calls
45
GPRS Information
46
WAP Information
46
External Device
46
Total Data
46
Profiles 47
Settings
48
Alarm Clock 48
Date & Time Settings
49
Date & Time
49
Auto Update
49
Phone Settings
50
Display Settings
50
Power on Sound
50
Languages
51
LED indicator
51
Table of Contents
7
6
Call Settings 51
Call Divert
51
Answer Mode
52
Send My Number
52
Call Waiting
52
Minute Minder
53
Auto Redial
53
Security Settings
53
PIN Code Request
53
Fixed Dial Number (FDN)
54
Change Codes
54
Network Settings
55
Automatic
55
Manual
55
Preferred
55
GPRS Settings
56
External Device
56
Reset Settings
56
Organizer 57
Schedule 57
Memo
59
Phonebook
60
Search
60
Add New
61
Speed Dials
62
Caller Groups
62
Copy All 63
Delete All
63
Settings
64
Information
64
Fun & Tools 65
Game 65
My Folder
66
Picture
66
Animation
66
Sound
66
Unit Converter
67
Calculator
67
World Time
68
mMode services 69
Home 70
Bookmarks
70
Push Messages
71
Inbox
71
Receive
71
Profiles
71
Go to URL
72
Cache Settings
72
Clear Cache
72
Cache Check
72
WAP Information
72
Reset Profiles 72
Q & A 73
Accessories
76
Safety Guidelines
78
Glossary
92
Index
94
7
6
Call Settings 51
Call Divert
51
Answer Mode
52
Send My Number
52
Call Waiting
52
Minute Minder
53
Auto Redial
53
Security Settings
53
PIN Code Request
53
Fixed Dial Number (FDN)
54
Change Codes
54
Network Settings
55
Automatic
55
Manual
55
Preferred
55
GPRS Settings
56
External Device
56
Reset Settings
56
Organizer 57
Schedule 57
Memo
59
Phonebook
60
Search
60
Add New
61
Speed Dials
62
Caller Groups
62
Copy All 63
Delete All
63
Settings
64
Information
64
Fun & Tools 65
Game 65
My Folder
66
Picture
66
Animation
66
Sound
66
Unit Converter
67
Calculator
67
World Time
68
mMode services 69
Home 70
Bookmarks
70
Push Messages
71
Inbox
71
Receive
71
Profiles
71
Go to URL
72
Cache Settings
72
Clear Cache
72
Cache Check
72
WAP Information
72
Reset Profiles 72
Q & A 73
Accessories
76
Safety Guidelines
78
Glossary
92
Index
94
9
8
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information carefully for
optimal performance and to prevent any damage to, or misuse of,
the phone. Any changes or modifications not expressly approved in
this user guide could void your warranty for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the bathroom,
swimming pool, etc.
Always store your phone away from heat. Never store
your phone in settings that may expose it to temperatures less than
32°F or greater than 104°F, such as outside during a snowstorm or
in your car on a hot day. Exposure to excessive cold or heat will
result in malfunction, damage and/or catastrophic failure.
Be careful when using your phone near other
electronic devices. RF emissions from your mobile phone may
affect nearby inadequately shielded electronic equipment. You
should consult with manufacturers of any personal medical devices
such as pacemakers and hearing aides to determine if they are
susceptible to interference from your mobile phone. Turn off your
phone in a medical facility or at a gas station.
Never place your phone in microwave oven as this may result in
damage to the phone or dangerous conditions.
IMPORTANT! Please read the SAFETY GUIDELINES on
page 78 and the SAFETY INFORMATION on page 10 before using
your phone.
Unpacking For Your Safety
Check to make sure that you have all the parts shown below.
SIM card
Handset Standard
Battery
Headset
Travel Adapter
Note Phone user guide and service provider collateral pieces
included.
9
8
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information carefully for
optimal performance and to prevent any damage to, or misuse of,
the phone. Any changes or modifications not expressly approved in
this user guide could void your warranty for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the bathroom,
swimming pool, etc.
Always store your phone away from heat. Never store
your phone in settings that may expose it to temperatures less than
32°F or greater than 104°F, such as outside during a snowstorm or
in your car on a hot day. Exposure to excessive cold or heat will
result in malfunction, damage and/or catastrophic failure.
Be careful when using your phone near other
electronic devices. RF emissions from your mobile phone may
affect nearby inadequately shielded electronic equipment. You
should consult with manufacturers of any personal medical devices
such as pacemakers and hearing aides to determine if they are
susceptible to interference from your mobile phone. Turn off your
phone in a medical facility or at a gas station.
Never place your phone in microwave oven as this may result in
damage to the phone or dangerous conditions.
IMPORTANT! Please read the SAFETY GUIDELINES on
page 78 and the SAFETY INFORMATION on page 10 before using
your phone.
Unpacking For Your Safety
Check to make sure that you have all the parts shown below.
SIM card
Handset Standard
Battery
Headset
Travel Adapter
Note Phone user guide and service provider collateral pieces
included.
11
10
Safety Information
Please read and observe the following information for the safe and
proper use of your phone and to prevent any unanticipated
damage. Also, keep the user’s manual in an accessible place at all
times after reading it.
]
Unplug the power cord and charger during a lightning storm to
avoid electric shock or fire.
]
Do not use your phone in high explosive areas as the phone may
generate sparks.
]
Do not put your phone in a place subject to excessive dust, and
keep the minimum required distance between the power cord
and heat sources.
]
Do not damage the power cord by bending, twisting, pulling, or
subjecting it to heat. Do not use the plug if it is loose as it may
cause fire or electric shock.
]
Hold the power cord plug firmly to plug and unplug the power
cord. Ensure the plug is firmly connected. If it is not firmly
connected, it may cause excessive heat or fire.
]
Do not place a heavy item on the power cord. Do not allow the
power cord to be crimped as it may cause fire or electric shock.
]
Be careful not to let the battery contact metal conductors such
as a necklace or coins. When shorted, it may cause an
explosion.
]
Do not disassemble or impact the battery as it may cause
electric shock, short-circuit, and fire. Store the battery in a place
out of reach of children.
]
Using a damaged battery or placing a battery in your mouth may
cause serious injury.
]
Do not place items containing magnetic components such as a
credit card, phone card, bank book or a subway ticket, near
your phone. The magnetic strip can be damaged by the phone.
]
Do not hold or let the antenna come in contact with your body
during a call.
]
Talking on your phone for a long period of time may reduce the
call quality due to heat generated during the use of the phone.
]
Do not allow excessive vibration or impact to the phone.
]
When you do not plan to use the phone for a long period of time,
store it in a safe area with the power cord unplugged.
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications (FCC) of the United
States, with its action in Report and Order FCC 96-326, adopted an
updated safety standard for human exposure to radio frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
For Your SafetyFor Your Safety
11
10
Safety Information
Please read and observe the following information for the safe and
proper use of your phone and to prevent any unanticipated
damage. Also, keep the user’s manual in an accessible place at all
times after reading it.
]
Unplug the power cord and charger during a lightning storm to
avoid electric shock or fire.
]
Do not use your phone in high explosive areas as the phone may
generate sparks.
]
Do not put your phone in a place subject to excessive dust, and
keep the minimum required distance between the power cord
and heat sources.
]
Do not damage the power cord by bending, twisting, pulling, or
subjecting it to heat. Do not use the plug if it is loose as it may
cause fire or electric shock.
]
Hold the power cord plug firmly to plug and unplug the power
cord. Ensure the plug is firmly connected. If it is not firmly
connected, it may cause excessive heat or fire.
]
Do not place a heavy item on the power cord. Do not allow the
power cord to be crimped as it may cause fire or electric shock.
]
Be careful not to let the battery contact metal conductors such
as a necklace or coins. When shorted, it may cause an
explosion.
]
Do not disassemble or impact the battery as it may cause
electric shock, short-circuit, and fire. Store the battery in a place
out of reach of children.
]
Using a damaged battery or placing a battery in your mouth may
cause serious injury.
]
Do not place items containing magnetic components such as a
credit card, phone card, bank book or a subway ticket, near
your phone. The magnetic strip can be damaged by the phone.
]
Do not hold or let the antenna come in contact with your body
during a call.
]
Talking on your phone for a long period of time may reduce the
call quality due to heat generated during the use of the phone.
]
Do not allow excessive vibration or impact to the phone.
]
When you do not plan to use the phone for a long period of time,
store it in a safe area with the power cord unplugged.
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications (FCC) of the United
States, with its action in Report and Order FCC 96-326, adopted an
updated safety standard for human exposure to radio frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
For Your SafetyFor Your Safety
13
12
CAUTION
Use only the supplied and approved antenna. Use of unauthorized
antennas or modifications could impair call quality, damage the
phone, void your warranty and/or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with skin, a minor burn may result.
Contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the
back of the phone kept 10mm between the user’s body and the
back of the phone. To comply with FCC RF exposure requirements,
a minimum separation distance of 10mm must be maintained
between the user’s body and the back of the phone. Third-party
belt-clips, holsters, and similar accessories containing metallic
components should not be used. Body-worn accessories that
cannot maintain 3/4 inch (2 cm) separation distance between the
user’s body and the back of the phone, and have not been tested
for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
Vehicle Mounted External Antenna (optional,
if available)
A minimum separation distance of 8 inches (20 cm) must be
maintained between the user/bystander and the vehicle mounted
external antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, visit the FCC website at
www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device
and its accessories may not cause harmful interference, and (2)
this device and its accessories must accept any interference
received, including interference that may cause undesired
operation.
Cautions for Battery
]
Do not disassemble.
]
Do not short-circuit.
]
Do not expose to high temperature: 60°C (140°F).
]
Do not incinerate.
Battery Disposal
]
Please dispose of your battery properly or bring to your local
wireless carrier for recycling.
]
Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
]
Using the wrong battery charger could damage your phone and
void your warranty.
]
The adapter or battery charger is intended for indoor use only.
Do not expose the adapter or battery charger to direct sunlight or
use it in places with high humidity, such as the bathroom.
For Your SafetyFor Your Safety
13
12
CAUTION
Use only the supplied and approved antenna. Use of unauthorized
antennas or modifications could impair call quality, damage the
phone, void your warranty and/or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with skin, a minor burn may result.
Contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the
back of the phone kept 10mm between the user’s body and the
back of the phone. To comply with FCC RF exposure requirements,
a minimum separation distance of 10mm must be maintained
between the user’s body and the back of the phone. Third-party
belt-clips, holsters, and similar accessories containing metallic
components should not be used. Body-worn accessories that
cannot maintain 3/4 inch (2 cm) separation distance between the
user’s body and the back of the phone, and have not been tested
for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
Vehicle Mounted External Antenna (optional,
if available)
A minimum separation distance of 8 inches (20 cm) must be
maintained between the user/bystander and the vehicle mounted
external antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, visit the FCC website at
www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device
and its accessories may not cause harmful interference, and (2)
this device and its accessories must accept any interference
received, including interference that may cause undesired
operation.
Cautions for Battery
]
Do not disassemble.
]
Do not short-circuit.
]
Do not expose to high temperature: 60°C (140°F).
]
Do not incinerate.
Battery Disposal
]
Please dispose of your battery properly or bring to your local
wireless carrier for recycling.
]
Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
]
Using the wrong battery charger could damage your phone and
void your warranty.
]
The adapter or battery charger is intended for indoor use only.
Do not expose the adapter or battery charger to direct sunlight or
use it in places with high humidity, such as the bathroom.
For Your SafetyFor Your Safety
15
14
Your Phone
Your Phone
Your Phone’s Features
1. Earpiece
2,12. Left soft key / Right soft key: Each of these keys
perform the functions indicated by the text on the display
immediately above them.
3. Side keys: These keys are used to control the volume of key
tone in standby mode and speaker volume during a call.
4. Vibration key: Use to set the Manner Mode by pressing and
holding the left navigation key for about 3 seconds while in
standby mode.
5. Send key: You can dial a phone number and answer incoming
calls. Press this key in standby mode to quickly access the most
recent incoming, outgoing and missed calls.
6. Alphanumeric keys: These keys are used to dial a number in
standby mode and to enter number or characters in edit mode.
7. Microphone: Can be muted during a call for privacy.
8. Active flip: Open the flip to answer an incoming call and close
to end the call.
9. Display screen: Displays phone status icons, menu items,
Web information, pictures and more in full color.
10. Navigation key: Use for quick access to phone functions.
11. mMode access key: Long press will launch the mMode
browser. Allows you to select and confirm menu options.
13. Message key: Use to retrieve or send voice and text
messages.
14. End / Power key: Allows you to power the phone on or off,
end calls, or return to Standby Mode.
Phone Components
1. Earpiece
8. Active flip
9. Display screen
10. Navigation key
2. Left soft key
3. Side keys
5. Send key
11. mMode access
key
12. Right soft key
4. Vibration key
13. Message key
14. End / Power key
7. Microphone
6. Alphanumeric
keys
15
14
Your Phone
Your Phone
Your Phone’s Features
1. Earpiece
2,12. Left soft key / Right soft key: Each of these keys
perform the functions indicated by the text on the display
immediately above them.
3. Side keys: These keys are used to control the volume of key
tone in standby mode and speaker volume during a call.
4. Vibration key: Use to set the Manner Mode by pressing and
holding the left navigation key for about 3 seconds while in
standby mode.
5. Send key: You can dial a phone number and answer incoming
calls. Press this key in standby mode to quickly access the most
recent incoming, outgoing and missed calls.
6. Alphanumeric keys: These keys are used to dial a number in
standby mode and to enter number or characters in edit mode.
7. Microphone: Can be muted during a call for privacy.
8. Active flip: Open the flip to answer an incoming call and close
to end the call.
9. Display screen: Displays phone status icons, menu items,
Web information, pictures and more in full color.
10. Navigation key: Use for quick access to phone functions.
11. mMode access key: Long press will launch the mMode
browser. Allows you to select and confirm menu options.
13. Message key: Use to retrieve or send voice and text
messages.
14. End / Power key: Allows you to power the phone on or off,
end calls, or return to Standby Mode.
Phone Components
1. Earpiece
8. Active flip
9. Display screen
10. Navigation key
2. Left soft key
3. Side keys
5. Send key
11. mMode access
key
12. Right soft key
4. Vibration key
13. Message key
14. End / Power key
7. Microphone
6. Alphanumeric
keys
17
16
Your Phone Your Phone
SIM Card
Socket
Battery Lock
Antenna
Cable Connector/
Battery Charging Connector
Handstrap Hole
Battery
Battery
Terminals
Icon Description
Indicates the strength of the network signal.
Indicates a call is in progress.
Indicates that you are roaming off the network.
Indicates that GPRS service is available.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates the receipt of a text message.
Indicates the receipt of a voice message.
Indicates that the vibration ringer has been set.
Indicates the Loud menu in Profiles.
Indicates the Silent menu in Profiles.
Indicates the Headset menu in Profiles.
Indicates the Car menu in Profiles.
Indicates the General menu in Profiles.
Indicates that you can use the push message service.
Indicates the Schedule function.
Display Information
The table below describes various display indicators or icons that
appear on the phone’s display screen.
On-Screen Icons
17
16
Your Phone Your Phone
SIM Card
Socket
Battery Lock
Antenna
Cable Connector/
Battery Charging Connector
Handstrap Hole
Battery
Battery
Terminals
Icon Description
Indicates the strength of the network signal.
Indicates a call is in progress.
Indicates that you are roaming off the network.
Indicates that GPRS service is available.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates the receipt of a text message.
Indicates the receipt of a voice message.
Indicates that the vibration ringer has been set.
Indicates the Loud menu in Profiles.
Indicates the Silent menu in Profiles.
Indicates the Headset menu in Profiles.
Indicates the Car menu in Profiles.
Indicates the General menu in Profiles.
Indicates that you can use the push message service.
Indicates the Schedule function.
Display Information
The table below describes various display indicators or icons that
appear on the phone’s display screen.
On-Screen Icons
19
18
Getting Started
Getting Started
Using the Battery, Charger and SIM
Card
Installing the Battery
To install the battery, insert the bottom of the battery into the
opening on the back of the phone. Then push the battery down
until the latch clicks.
Removing the Battery
Turn the power off. (If power is left on, there is a chance you could
lose the stored telephone numbers and messages.)
Pressing the release latch upwards will detach the battery from the
phone.
Warning Do not force the connector as this may damage the
phone and/or the travel adapter.
Charging the Battery
Use of unauthorized accessories could damage your phone and
invalidate your warranty.
To use the travel adapter provided with your phone:
1. With the battery in position on the phone, connect the lead from
the travel adapter to the bottom of the phone. Check that the
arrow on the lead connector is facing towards the front of the
phone.
2. Connect the adapter to a standard AC wall outlet. Only use the
travel adapter that comes included with the package.
Disconnecting the Charger
When charging is finished, disconnect the adapter from the power
outlet and from the phone by pressing on the gray tabs on both
sides of the connector while pulling the connector out.
19
18
Getting Started
Getting Started
Using the Battery, Charger and SIM
Card
Installing the Battery
To install the battery, insert the bottom of the battery into the
opening on the back of the phone. Then push the battery down
until the latch clicks.
Removing the Battery
Turn the power off. (If power is left on, there is a chance you could
lose the stored telephone numbers and messages.)
Pressing the release latch upwards will detach the battery from the
phone.
Warning Do not force the connector as this may damage the
phone and/or the travel adapter.
Charging the Battery
Use of unauthorized accessories could damage your phone and
invalidate your warranty.
To use the travel adapter provided with your phone:
1. With the battery in position on the phone, connect the lead from
the travel adapter to the bottom of the phone. Check that the
arrow on the lead connector is facing towards the front of the
phone.
2. Connect the adapter to a standard AC wall outlet. Only use the
travel adapter that comes included with the package.
Disconnecting the Charger
When charging is finished, disconnect the adapter from the power
outlet and from the phone by pressing on the gray tabs on both
sides of the connector while pulling the connector out.
21
20
Getting StartedGetting Started
Installing the SIM Card
When you subscribe to a cellular network, you are provided with a
plug-in SIM card loaded with your subscription details (PIN,
optional services available and so on).
Locate the SIM card socket in the back of the phone. Follow the
steps below to install the SIM card.
1. Remove the battery if attached.
2. Slide the SIM card into the SIM card holder so that the holder
locks the card in position.
Notice When you need to remove the SIM card, slide it towards the
top of the phone and take it out of the holder.
Notice
]
Before installing always make sure that the phone is switched off
and remove the battery.
]
The metal contact of the SIM card can be easily damaged by
scratches. Pay special attention to the SIM card while handling and
installing. Follow the instructions supplied with the SIM card.
Turning Your Phone On and Off
Turning Your Phone On
1. Install a charged battery pack or connect the phone to an
external power source such as the vehicle power adapter or car
kit.
2. Press for more than five seconds.
Notice
]
The battery delivered with your phone has to be fully charged
before using it.
]
Do not remove the battery or the SIM card while charging.
]
If your phone is powered on while charging, you’ll see the bars in
the battery indicator icon cycle.
When the battery is fully charged, the bars in the battery indicator
icon will flash on and off
]
If your phone is powered off, the display will show the charging
status. ‘Charging’ or ‘Full’ will be displayed.
If the battery fails to charge completely:
]
After turning the phone on and off, please attempt to recharge the
battery.
]
After detaching and reattaching the battery, please attempt to
recharge the battery.
Full
Charging
SIM
SIM
21
20
Getting StartedGetting Started
Installing the SIM Card
When you subscribe to a cellular network, you are provided with a
plug-in SIM card loaded with your subscription details (PIN,
optional services available and so on).
Locate the SIM card socket in the back of the phone. Follow the
steps below to install the SIM card.
1. Remove the battery if attached.
2. Slide the SIM card into the SIM card holder so that the holder
locks the card in position.
Notice When you need to remove the SIM card, slide it towards the
top of the phone and take it out of the holder.
Notice
]
Before installing always make sure that the phone is switched off
and remove the battery.
]
The metal contact of the SIM card can be easily damaged by
scratches. Pay special attention to the SIM card while handling and
installing. Follow the instructions supplied with the SIM card.
Turning Your Phone On and Off
Turning Your Phone On
1. Install a charged battery pack or connect the phone to an
external power source such as the vehicle power adapter or car
kit.
2. Press for more than five seconds.
Notice
]
The battery delivered with your phone has to be fully charged
before using it.
]
Do not remove the battery or the SIM card while charging.
]
If your phone is powered on while charging, you’ll see the bars in
the battery indicator icon cycle.
When the battery is fully charged, the bars in the battery indicator
icon will flash on and off
]
If your phone is powered off, the display will show the charging
status. ‘Charging’ or ‘Full’ will be displayed.
If the battery fails to charge completely:
]
After turning the phone on and off, please attempt to recharge the
battery.
]
After detaching and reattaching the battery, please attempt to
recharge the battery.
Full
Charging
SIM
SIM
23
22
Getting Started
3. Depending on the status of the PIN code request setting you
may or may not need to enter it.
Turning Your Phone Off
1. Press for a few seconds.
Notice
Like any other radio device, avoid any unnecessary contact
with the antenna while your phone is on.
Notice Always store your code in a safe place. If your code is lost,
please contact your service provider to reset.
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be
changed by using the Change Codes feature [Menu 4.5.3].
Security code (4 to 8 digits)
The security code protects the unauthorized use of your phone.
The default security code is set to ‘0000’ and the security code is
required to delete all phone entries and to activate the Restore
Factory Settings menu. The security code default setting can be
modified from the Security Settings menu.
Barring Password
The barring password is required when you use the Call Barring
function. The password is obtained from the service provider when
you subscribe to this function. See page 53 for further details.
Making and Answering Calls
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the area code. To edit a
number on the display screen, press the right/left navigation
keys to erase one digit at a time.
]
Press and hold the right soft key[Clear] to erase the entire
number.
3. Press to call the number.
4. When finished, press .
Making a Call by Send Key
1. Press , and the most recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press .
Making International Calls
1. Press and hold the key for the international prefix. The ‘+’
character can be replaced with the international access code.
2. Enter the country code, area code, and the phone number.
3. Press .
Ending a Call
When you have finished a call, press the key.
General Functions
23
22
Getting Started
3. Depending on the status of the PIN code request setting you
may or may not need to enter it.
Turning Your Phone Off
1. Press for a few seconds.
Notice
Like any other radio device, avoid any unnecessary contact
with the antenna while your phone is on.
Notice Always store your code in a safe place. If your code is lost,
please contact your service provider to reset.
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be
changed by using the Change Codes feature [Menu 4.5.3].
Security code (4 to 8 digits)
The security code protects the unauthorized use of your phone.
The default security code is set to ‘0000’ and the security code is
required to delete all phone entries and to activate the Restore
Factory Settings menu. The security code default setting can be
modified from the Security Settings menu.
Barring Password
The barring password is required when you use the Call Barring
function. The password is obtained from the service provider when
you subscribe to this function. See page 53 for further details.
Making and Answering Calls
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the area code. To edit a
number on the display screen, press the right/left navigation
keys to erase one digit at a time.
]
Press and hold the right soft key[Clear] to erase the entire
number.
3. Press to call the number.
4. When finished, press .
Making a Call by Send Key
1. Press , and the most recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press .
Making International Calls
1. Press and hold the key for the international prefix. The ‘+’
character can be replaced with the international access code.
2. Enter the country code, area code, and the phone number.
3. Press .
Ending a Call
When you have finished a call, press the key.
General Functions
25
24
Making a Call From the Phonebook
You can store names and phone numbers dialed frequently in the
SIM card as well as the phone memory known as the Phonebook.
You can dial a number by simply looking up a name in the
phonebook. For more details on the Phonebook feature, please
refer to page 60.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the
side keys of the phone.
In idle mode with the flip cover open, you can adjust the key
volume using the side keys.
Answering a Call
When you receive a call, the phone rings and the flashing phone
icon appears on the screen. If the caller can be identified, the
caller’s phone number(or name if stored in your phonebook) is
displayed.
1. Open the flip and press the key or the left soft key to answer
an incoming call. If the Any key menu option(Menu 4.4.2) has
been set to , any key press will answer a call except for the
key or the right soft key.
2. End the call by closing the phone or pressing the key.
General Functions
Notice
]
To reject an incoming call, press and hold the side keys on the left
side of the phone without opening the flip.
]
If the Flip open menu option(Menu 4.4.2) is set to , you do not
need to press any key. You can answer the call simply by opening
the flip.
Notice You can answer a call while using the phonebook or other
menu features.
Manner Mode (Quick)
When the flip is closed, Manner Mode can be activated by
pressing and hold down Side keys.
Signal Strength
Since the antenna is fixed, it does not extend. If you are inside a
building, being near a window may give you better reception. You
can see the strength of your signal by the signal indicator ( ) on
your phone’s display screen.
Entering Text
You can enter alphanumeric characters by using the phone’s
keypad. For example, storing names in the phonebook, writing a
message, creating a personal greeting or scheduling events in the
calendar all require entering text.
Following text input methods are available in the phone.
T9 Mode
This mode allows you to enter words with only one keystroke per
letter. Each key on the keypad has more than one letter. The T9
mode automatically compares your keystrokes with an internal
linguistic dictionary to determine the correct word, thus requiring
far fewer keystrokes than the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by pressing the key labeled
with the required letter once, twice, three or four times until the
letter is displayed.
123 Mode (Numbers Mode)
Type numbers using one keystroke per number. To change to 123
mode in a text entry field, press key until 123 mode is
displayed.
General Functions
25
24
Making a Call From the Phonebook
You can store names and phone numbers dialed frequently in the
SIM card as well as the phone memory known as the Phonebook.
You can dial a number by simply looking up a name in the
phonebook. For more details on the Phonebook feature, please
refer to page 60.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the
side keys of the phone.
In idle mode with the flip cover open, you can adjust the key
volume using the side keys.
Answering a Call
When you receive a call, the phone rings and the flashing phone
icon appears on the screen. If the caller can be identified, the
caller’s phone number(or name if stored in your phonebook) is
displayed.
1. Open the flip and press the key or the left soft key to answer
an incoming call. If the Any key menu option(Menu 4.4.2) has
been set to , any key press will answer a call except for the
key or the right soft key.
2. End the call by closing the phone or pressing the key.
General Functions
Notice
]
To reject an incoming call, press and hold the side keys on the left
side of the phone without opening the flip.
]
If the Flip open menu option(Menu 4.4.2) is set to , you do not
need to press any key. You can answer the call simply by opening
the flip.
Notice You can answer a call while using the phonebook or other
menu features.
Manner Mode (Quick)
When the flip is closed, Manner Mode can be activated by
pressing and hold down Side keys.
Signal Strength
Since the antenna is fixed, it does not extend. If you are inside a
building, being near a window may give you better reception. You
can see the strength of your signal by the signal indicator ( ) on
your phone’s display screen.
Entering Text
You can enter alphanumeric characters by using the phone’s
keypad. For example, storing names in the phonebook, writing a
message, creating a personal greeting or scheduling events in the
calendar all require entering text.
Following text input methods are available in the phone.
T9 Mode
This mode allows you to enter words with only one keystroke per
letter. Each key on the keypad has more than one letter. The T9
mode automatically compares your keystrokes with an internal
linguistic dictionary to determine the correct word, thus requiring
far fewer keystrokes than the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by pressing the key labeled
with the required letter once, twice, three or four times until the
letter is displayed.
123 Mode (Numbers Mode)
Type numbers using one keystroke per number. To change to 123
mode in a text entry field, press key until 123 mode is
displayed.
General Functions
27
26
Symbol Mode
This mode allows you to enter special characters.
Changing the Text Input Mode
1. When you are in a field that allows characters to be entered, you
will notice the text input mode indicator in the upper right corner
of the display.
2. If you want to change modes, press the key. The available
modes are displayed.
Using the T9 Mode
The T9 predictive text input mode allows you to enter words easily
with a minimum number of key presses. As you press each key, the
phone begins to display the characters that it thinks you are typing
based on a built-in dictionary. As new letters are added, the word
changes to reflect the most likely candidate from the dictionary.
1. When you are in the T9 predictive text input mode, start entering
a word by pressing keys to . Press one key per letter.
]
The word changes as letters are typed - ignore what’s on the
screen until the word is typed completely.
]
If the word is still incorrect after typing completely, press the
down navigation key once or more to cycle through the other
word options.
General FunctionsGeneral Functions
Notice You can select a different T9 language from the menu option.
The default setting on the phone is T9 enabled mode.
To turn it off, select the T9 Off option from the menu.
Write message
918
Options Back
ABC
1
Example: Press to type Good
Press [down navigation key] to type
Home
]
If the desired word is missing from the word choices list, add it
by using the ABC mode.
2. Enter the whole word before editing or deleting any keystrokes.
3. Complete each word with a space by pressing the key.
To delete letters, press right soft key[Clear]. Press and hold down
right soft key[Clear] to erase entire words.
Using the ABC Mode
Use the to keys to enter your text.
1. Press the key labeled with the required letter:
]
Once for the first letter
]
Twice for the second letter
]
And so on
2. To insert a space, press the key once. To delete letters,
press the right soft key[Clear]. Press and hold down the right
soft key[Clear] to clear the display.
Notice
To exit the text input mode without saving your input,
press . The phone returns to the previous menu level.
27
26
Symbol Mode
This mode allows you to enter special characters.
Changing the Text Input Mode
1. When you are in a field that allows characters to be entered, you
will notice the text input mode indicator in the upper right corner
of the display.
2. If you want to change modes, press the key. The available
modes are displayed.
Using the T9 Mode
The T9 predictive text input mode allows you to enter words easily
with a minimum number of key presses. As you press each key, the
phone begins to display the characters that it thinks you are typing
based on a built-in dictionary. As new letters are added, the word
changes to reflect the most likely candidate from the dictionary.
1. When you are in the T9 predictive text input mode, start entering
a word by pressing keys to . Press one key per letter.
]
The word changes as letters are typed - ignore what’s on the
screen until the word is typed completely.
]
If the word is still incorrect after typing completely, press the
down navigation key once or more to cycle through the other
word options.
General FunctionsGeneral Functions
Notice You can select a different T9 language from the menu option.
The default setting on the phone is T9 enabled mode.
To turn it off, select the T9 Off option from the menu.
Write message
918
Options Back
ABC
1
Example: Press to type Good
Press [down navigation key] to type
Home
]
If the desired word is missing from the word choices list, add it
by using the ABC mode.
2. Enter the whole word before editing or deleting any keystrokes.
3. Complete each word with a space by pressing the key.
To delete letters, press right soft key[Clear]. Press and hold down
right soft key[Clear] to erase entire words.
Using the ABC Mode
Use the to keys to enter your text.
1. Press the key labeled with the required letter:
]
Once for the first letter
]
Twice for the second letter
]
And so on
2. To insert a space, press the key once. To delete letters,
press the right soft key[Clear]. Press and hold down the right
soft key[Clear] to clear the display.
Notice
To exit the text input mode without saving your input,
press . The phone returns to the previous menu level.
29
28
Notice Refer to the table below for more information on the
characters available using the keys.
General FunctionsGeneral Functions
Characters in the Order Display
Upper Case Lower Case
. , -
¿
?
¡
!
@
1 . , -
¿
?
¡
!
@
1
A B C Á Ã Ç 2 a b c á ã ç 2
D E F É 3 d e f é 3
G H I Í 4 g h i í 4
J K L 5 j k l 5
M N O Ó Ñ 6 m n o ó ñ 6
P Q R S 7 p q r s 7
T U V Ú Ü 8 t u v ú ü 8
W X Y Z 9 w x y z 9
Space Key Space Key
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text message
(a telephone number, for example).
Press the keys corresponding to the required digits before
manually switching back to the appropriate text entry mode.
Using the Symbol Mode
The Symbol Mode enables you to enter various symbols or special
characters.
To enter a symbol, press the key. Use the navigation keys to
select the desired symbol and press the [OK] key.
1
2
3
4
5
6
7
8
9
0
Key
Phonebook
You can store phone numbers and their corresponding names in
the memory of your SIM card.
In addition, you can store up to 100 numbers and names in the
phone memory.
The SIM card and phone memory, although physically separate,
are utilized like a single entity known as the Phonebook. (See page
60 for details)
In-Call Menu
Your phone provides a number of control functions that you can
use during a call. To access these functions during a call, press
the left soft key [Options].
During a Call
The menu displayed on the handset screen during a call is different
than the default main menu displayed when in idle screen, and the
options are described below.
Making a Second Call
You can get a number you wish to dial from the phonebook to
make a second call. Press the right soft key then select Search.
To save the dialed number into the phonebook during a call, press
the right soft key then select Add New.
Swapping Between Two Calls
To switch between two calls, press the left soft key, and then select
Swap.
29
28
Notice Refer to the table below for more information on the
characters available using the keys.
General FunctionsGeneral Functions
Characters in the Order Display
Upper Case Lower Case
. , -
¿
?
¡
!
@
1 . , -
¿
?
¡
!
@
1
A B C Á Ã Ç 2 a b c á ã ç 2
D E F É 3 d e f é 3
G H I Í 4 g h i í 4
J K L 5 j k l 5
M N O Ó Ñ 6 m n o ó ñ 6
P Q R S 7 p q r s 7
T U V Ú Ü 8 t u v ú ü 8
W X Y Z 9 w x y z 9
Space Key Space Key
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text message
(a telephone number, for example).
Press the keys corresponding to the required digits before
manually switching back to the appropriate text entry mode.
Using the Symbol Mode
The Symbol Mode enables you to enter various symbols or special
characters.
To enter a symbol, press the key. Use the navigation keys to
select the desired symbol and press the [OK] key.
1
2
3
4
5
6
7
8
9
0
Key
Phonebook
You can store phone numbers and their corresponding names in
the memory of your SIM card.
In addition, you can store up to 100 numbers and names in the
phone memory.
The SIM card and phone memory, although physically separate,
are utilized like a single entity known as the Phonebook. (See page
60 for details)
In-Call Menu
Your phone provides a number of control functions that you can
use during a call. To access these functions during a call, press
the left soft key [Options].
During a Call
The menu displayed on the handset screen during a call is different
than the default main menu displayed when in idle screen, and the
options are described below.
Making a Second Call
You can get a number you wish to dial from the phonebook to
make a second call. Press the right soft key then select Search.
To save the dialed number into the phonebook during a call, press
the right soft key then select Add New.
Swapping Between Two Calls
To switch between two calls, press the left soft key, and then select
Swap.
31
30
General FunctionsGeneral Functions
Answering an Incoming Call
To answer an incoming call when the handset is ringing, simply
press the key. The handset is also able to warn you of an
incoming call while you are already on a call. A tone sounds in the
earpiece, and the display will show that a second call is waiting.
This feature, known as Call Waiting, is only available if your
network supports it. For details of how to activate and deactivate it
see Call Waiting [Menu 4.4.4].
If Call Waiting is on, you can put the first call on hold and answer
the second, by pressing or by pressing the left soft key, and
then selecting the Hold call. You can end the current call and
answer the waiting call by pressing the left soft key and then
selecting Active call menu of End call.
Rejecting an Incoming Call
You can reject an incoming call without answering by simply
pressing the key.
During a call, you can reject an incoming call by pressing the left
soft key, which is the [Menu] key and selecting the
Conference/Reject or by pressing the key.
Muting the Microphone
You can mute the microphone during a call by pressing the
[Menu] key then selecting Mute on. The handset can be
unmuted by pressing the Mute off menu. When the handset is
muted, the caller cannot hear you, but you can still hear them.
Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, press the left soft key, and
then select DTMF on. DTMF tones can be turned off the same
way. DTMF tones allow your phone to make use of an automated
switchboard.
Multiparty or Conference Calls
The multiparty or conference service provides you with the ability to
have a simultaneous conversation with more than one caller, if your
network service provider supports this feature. A multiparty call can
only be set up when you have one active call and one call on hold,
both calls having been answered. Once a multiparty call is set up,
calls may be added, disconnected or separated (that is, removed
from the multiparty call but still connected to you) by the person
who set up the multiparty call. These options are all available from
the In-Call menu. The maximum callers in a multiparty call are five.
Once started, you are in control of the multiparty call, and only you
can add calls to the multiparty call.
Making a Second Call
You can make a second call while currently on a call. Enter the
second number and press the . When the second call is
connected, the first call is automatically placed on hold. You can
swap between calls, by selecting the left soft key and then
selecting Swap.
Setting Up a Conference Call
To set up a conference call, place one call on hold and while the
active call is on, press the left soft key and then select the Join
menu of Conference call.
Activate the Conference Call on Hold
To activate a conference call on hold, press the left soft key, and
then select the Join menu of Conference call.
Adding Calls to the Conference Call
To add a call to an existing conference call, press the left soft key,
and then select the Join menu of Conference call.
31
30
General FunctionsGeneral Functions
Answering an Incoming Call
To answer an incoming call when the handset is ringing, simply
press the key. The handset is also able to warn you of an
incoming call while you are already on a call. A tone sounds in the
earpiece, and the display will show that a second call is waiting.
This feature, known as Call Waiting, is only available if your
network supports it. For details of how to activate and deactivate it
see Call Waiting [Menu 4.4.4].
If Call Waiting is on, you can put the first call on hold and answer
the second, by pressing or by pressing the left soft key, and
then selecting the Hold call. You can end the current call and
answer the waiting call by pressing the left soft key and then
selecting Active call menu of End call.
Rejecting an Incoming Call
You can reject an incoming call without answering by simply
pressing the key.
During a call, you can reject an incoming call by pressing the left
soft key, which is the [Menu] key and selecting the
Conference/Reject or by pressing the key.
Muting the Microphone
You can mute the microphone during a call by pressing the
[Menu] key then selecting Mute on. The handset can be
unmuted by pressing the Mute off menu. When the handset is
muted, the caller cannot hear you, but you can still hear them.
Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, press the left soft key, and
then select DTMF on. DTMF tones can be turned off the same
way. DTMF tones allow your phone to make use of an automated
switchboard.
Multiparty or Conference Calls
The multiparty or conference service provides you with the ability to
have a simultaneous conversation with more than one caller, if your
network service provider supports this feature. A multiparty call can
only be set up when you have one active call and one call on hold,
both calls having been answered. Once a multiparty call is set up,
calls may be added, disconnected or separated (that is, removed
from the multiparty call but still connected to you) by the person
who set up the multiparty call. These options are all available from
the In-Call menu. The maximum callers in a multiparty call are five.
Once started, you are in control of the multiparty call, and only you
can add calls to the multiparty call.
Making a Second Call
You can make a second call while currently on a call. Enter the
second number and press the . When the second call is
connected, the first call is automatically placed on hold. You can
swap between calls, by selecting the left soft key and then
selecting Swap.
Setting Up a Conference Call
To set up a conference call, place one call on hold and while the
active call is on, press the left soft key and then select the Join
menu of Conference call.
Activate the Conference Call on Hold
To activate a conference call on hold, press the left soft key, and
then select the Join menu of Conference call.
Adding Calls to the Conference Call
To add a call to an existing conference call, press the left soft key,
and then select the Join menu of Conference call.
33
1. Messages (see page 37)
1.1 Text messages
1.1.1 Write message
1.1.2 Inbox
1.1.3 Outbox
1.1.4 Draft
1.1.5 Settings
1.1.6 Delete All
1.2 Voice messages
1.2.1 Listen to voice
messages
1.2.2 Voice mailbox
number
1.3 Info service
1.3.1 Receive
1.3.2 Inbox
1.3.3 Topics
1.3.4 Alert
1.3.5 Auto display
1.3.6 Languages
1.4 Templates
1.5 Name card
1.6 Check memory
2. Call register (see page 44)
2.1 Missed calls
2.2 Received calls
2.3 Dialed calls
2.4 Delete recent calls
2.4.1 Missed calls
2.4.2 Received calls
2.4.3 Dialed calls
2.4.4 All calls
2.5 Call durations
2.5.1 Last call
2.5.2 Received calls
2.5.3 Dialed calls
2.5.4 All calls
2.6 GPRS information
2.6.1 WAP information
2.6.2 External device
2.6.3 Total data
Menu Tree
The following illustration shows the available menu structure and
indicates the:
]
Number assigned to each menu option.
]
Page where you can find the feature description.
*
*
*
:
Shown only if network service provider supports this feature
32
General Functions
Displaying Callers in a Conference Call
To scroll through the numbers of the callers who make up a
conference call on the handset screen, press the up/down
navigation keys.
Private Call in a Conference Call
To have a private call with one caller from a conference call,
display the number of the caller you wish to talk to on the screen,
then press the left soft key. Select the Private menu of Conference
call to put all the other callers on hold.
Ending a Conference Call
Currently displayed caller from a conference call can be
disconnected by pressing the key.
33
1. Messages (see page 37)
1.1 Text messages
1.1.1 Write message
1.1.2 Inbox
1.1.3 Outbox
1.1.4 Draft
1.1.5 Settings
1.1.6 Delete All
1.2 Voice messages
1.2.1 Listen to voice
messages
1.2.2 Voice mailbox
number
1.3 Info service
1.3.1 Receive
1.3.2 Inbox
1.3.3 Topics
1.3.4 Alert
1.3.5 Auto display
1.3.6 Languages
1.4 Templates
1.5 Name card
1.6 Check memory
2. Call register (see page 44)
2.1 Missed calls
2.2 Received calls
2.3 Dialed calls
2.4 Delete recent calls
2.4.1 Missed calls
2.4.2 Received calls
2.4.3 Dialed calls
2.4.4 All calls
2.5 Call durations
2.5.1 Last call
2.5.2 Received calls
2.5.3 Dialed calls
2.5.4 All calls
2.6 GPRS information
2.6.1 WAP information
2.6.2 External device
2.6.3 Total data
Menu Tree
The following illustration shows the available menu structure and
indicates the:
]
Number assigned to each menu option.
]
Page where you can find the feature description.
*
*
*
:
Shown only if network service provider supports this feature
32
General Functions
Displaying Callers in a Conference Call
To scroll through the numbers of the callers who make up a
conference call on the handset screen, press the up/down
navigation keys.
Private Call in a Conference Call
To have a private call with one caller from a conference call,
display the number of the caller you wish to talk to on the screen,
then press the left soft key. Select the Private menu of Conference
call to put all the other callers on hold.
Ending a Conference Call
Currently displayed caller from a conference call can be
disconnected by pressing the key.
*
:
Shown only if network service provider supports this feature
35
34
3. Profiles (see page 47)
3.1 Vibrate only
3.1.1 Activate
3.2 Silent
3.2.1 Activate
3.2.2 Personalize
3.2.3 Rename
3.3 General
3.3.1 Activate
3.3.2 Personalize
3.3.3 Rename
3.4 Loud
3.4.1 Activate
3.4.2 Personalize
3.4.3 Rename
3.5 Headset
3.5.1 Personalize
3.6 Car
3.6.1 Personalize
4. Settings (see page 48)
4.1 Alarm clock
4.2 Date & Time
settings
4.2.1 Date & Time
4.2.2 Auto update
4.3 Phone settings
4.3.1 Display settings
4.3.2 Power on sound
4.3.3 Languages
4.3.4 LED indicator
4. Settings (continued)
4.4 Call settings
4.4.1 Call divert
4.4.2 Answer mode
4.4.3 Send my number
4.4.4 Call waiting
4.4.5 Minute minder
4.4.6 Auto redial
4.5 Security settings
4.5.1 PIN code request
4.5.2 Fixed dial number
4.5.3 Change codes
4.6 Network settings
4.6.1 Automatic
4.6.2 Manual
4.6.3 Preferred
4.7 GPRS settings
4.8 Reset settings
5. Organizer (see page 57)
5.1 Schedule
5.2 Memo
5.3 Phonebook
5.3.1 Search
5.3.2 Add new
5.3.3 Speed dials
5.3.4 Caller groups
5.3.5 Copy all
5.3.6 Delete all
5.3.7 Settings
5.3.8 Information
6. Fun & Tools (see page 65)
6.1 Game
6.2 My folder
6.2.1 Picture
6.2.2 Animation
6.2.3 Sound
6.3 Unit converter
6.4 Calculator
6.5 World time
7. Internet (see page 69)
7.1 Home
7.2 Bookmarks
7.3 Push messages
7.3.1 Inbox
7.3.2 Receive
7.4 Profiles
7.5 Go to URL
7.6 Cache settings
7.6.1 Clear cache
7.6.2 Cache check
7.7 WAP information
7.8 Reset profiles
Menu TreeMenu Tree
*
*
*
*
*
*
:
Shown only if network service provider supports this feature
35
34
3. Profiles (see page 47)
3.1 Vibrate only
3.1.1 Activate
3.2 Silent
3.2.1 Activate
3.2.2 Personalize
3.2.3 Rename
3.3 General
3.3.1 Activate
3.3.2 Personalize
3.3.3 Rename
3.4 Loud
3.4.1 Activate
3.4.2 Personalize
3.4.3 Rename
3.5 Headset
3.5.1 Personalize
3.6 Car
3.6.1 Personalize
4. Settings (see page 48)
4.1 Alarm clock
4.2 Date & Time
settings
4.2.1 Date & Time
4.2.2 Auto update
4.3 Phone settings
4.3.1 Display settings
4.3.2 Power on sound
4.3.3 Languages
4.3.4 LED indicator
4. Settings (continued)
4.4 Call settings
4.4.1 Call divert
4.4.2 Answer mode
4.4.3 Send my number
4.4.4 Call waiting
4.4.5 Minute minder
4.4.6 Auto redial
4.5 Security settings
4.5.1 PIN code request
4.5.2 Fixed dial number
4.5.3 Change codes
4.6 Network settings
4.6.1 Automatic
4.6.2 Manual
4.6.3 Preferred
4.7 GPRS settings
4.8 Reset settings
5. Organizer (see page 57)
5.1 Schedule
5.2 Memo
5.3 Phonebook
5.3.1 Search
5.3.2 Add new
5.3.3 Speed dials
5.3.4 Caller groups
5.3.5 Copy all
5.3.6 Delete all
5.3.7 Settings
5.3.8 Information
6. Fun & Tools (see page 65)
6.1 Game
6.2 My folder
6.2.1 Picture
6.2.2 Animation
6.2.3 Sound
6.3 Unit converter
6.4 Calculator
6.5 World time
7. Internet (see page 69)
7.1 Home
7.2 Bookmarks
7.3 Push messages
7.3.1 Inbox
7.3.2 Receive
7.4 Profiles
7.5 Go to URL
7.6 Cache settings
7.6.1 Clear cache
7.6.2 Cache check
7.7 WAP information
7.8 Reset profiles
Menu TreeMenu Tree
*
*
*
*
*
Your phone offers a set of functions that allow you to customize the
phone. These functions are arranged in menus and sub-menus,
accessed via the two soft keys marked and . Each menu
and sub-menu allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the current context; the
label on the bottom line of the display just above each key
indicates its current role.
37
36
Text Messages
Your phone receives voice mail notification messages and Short
Message Service (SMS) messages.
Voice mail and SMS are network services. Please contact your
service provider for more information.
When the icon appears, you have received a new voice mail.
When the icon appears, you have received a new text
message. If the message memory is full, an error message is
displayed, the icon flashes and you cannot receive any new
messages. Use the Delete option in the Inbox (Menu 1.1.2) to
delete obsolete messages. Once there is space in the memory any
undelivered SMS messages will be received (provided sufficient
space is available).
Write Message (Menu 1.1.1)
You can write and edit text messages of up to 918 characters.
1. Type in a message using key presses. For details on how to
enter text, refer to page 25 (Entering Text).
2. After completing the message select the required option by
pressing the left soft key [Options].
The following options are available.
]
Send to number: Enter the phone number or select the
number from the phone book.
]
Send to email: Enter the email or select the email from the
phone book.
]
Save to draft: Save the message so that it can be sent later.
]
Attach:
• Symbol: Attach special characters.
Press the left soft key
to access the
available menu.
Press the right soft
key to access the
available names.
Messages
Selecting Functions and Options
Menu 1.1
*
*
:
Shown only if network service provider supports this feature
Your phone offers a set of functions that allow you to customize the
phone. These functions are arranged in menus and sub-menus,
accessed via the two soft keys marked and . Each menu
and sub-menu allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the current context; the
label on the bottom line of the display just above each key
indicates its current role.
37
36
Text Messages
Your phone receives voice mail notification messages and Short
Message Service (SMS) messages.
Voice mail and SMS are network services. Please contact your
service provider for more information.
When the icon appears, you have received a new voice mail.
When the icon appears, you have received a new text
message. If the message memory is full, an error message is
displayed, the icon flashes and you cannot receive any new
messages. Use the Delete option in the Inbox (Menu 1.1.2) to
delete obsolete messages. Once there is space in the memory any
undelivered SMS messages will be received (provided sufficient
space is available).
Write Message (Menu 1.1.1)
You can write and edit text messages of up to 918 characters.
1. Type in a message using key presses. For details on how to
enter text, refer to page 25 (Entering Text).
2. After completing the message select the required option by
pressing the left soft key [Options].
The following options are available.
]
Send to number: Enter the phone number or select the
number from the phone book.
]
Send to email: Enter the email or select the email from the
phone book.
]
Save to draft: Save the message so that it can be sent later.
]
Attach:
• Symbol: Attach special characters.
Press the left soft key
to access the
available menu.
Press the right soft
key to access the
available names.
Messages
Selecting Functions and Options
Menu 1.1
*
*
:
Shown only if network service provider supports this feature
39
38
• Picture: Send and receive text messages that contain pictures,
known as ‘picture messages’. Several preset pictures are
available in the phone and they can be replaced with new ones
received from other sources.
• Animation: Attaching an animation in a message can be
done through EMS(Enhanced Messaging Service).
• Sound: Attach sounds that are available for short message.
• Text template: Use the text templates already set in the
phone.
• Phone number: Attach a phone number.
• Name card: Attach your name card.
]
T9 languages: Choose between English or Spanish T9
language. For details on how to enter text, refer to page 26
(Using the T9 Mode).
]
Clear text: Deletes the written message.
]
Exit: Exit the text editor.
Inbox (Menu 1.1.2)
Received text messages, page messages, and email lists may be
searched and the contents may be viewed.
Received messages are displayed from newest to oldest.
1. Press the left soft key [Menu].
2. Press .
3. Select .
MessagesMessages
The following options are available.
]
Reply: Replies to the received message.
]
Forward: Forwards a received message to other recipients.
After recipients are entered, the message can be forwarded.
]
Return call: Call back the sender.
]
Extract: Extract picture, sound, text webpage and email
address from the message. They will be saved in My Folder,
phonebook or bookmarks.
]
Delete: Deletes the selected message from the Inbox.
Outbox
(Menu 1.1.3)
View lists and contents of sent messages in this menu and also
verify if transmission was successful.
The following options are available.
]
Forward: Forwards the current message to other recipients.
]
Delete: Deletes the selected message from the Outbox.
Draft
(Menu 1.1.4)
This menu option shows the preset message list. Scroll through the
list using the up/down navigation keys.
The following options are available.
]
Send: Sends the current message to other recipients.
]
Delete: Deletes the selected preset message.
Icon directive
[ ] Read SIM email
[ ] Unread SIM email
[ ] Read email
[ ] Unread email
[ ] Read SIM message
[ ] Unread SIM message
[ ] Read message
[ ] Unread message
[ ] Read delivery report
[ ] Unread delivery report
Icon directive
[ ] Sent SIM email
[ ] Sent email
[ ] Sent SIM message
[ ] Sent message
39
38
• Picture: Send and receive text messages that contain pictures,
known as ‘picture messages’. Several preset pictures are
available in the phone and they can be replaced with new ones
received from other sources.
• Animation: Attaching an animation in a message can be
done through EMS(Enhanced Messaging Service).
• Sound: Attach sounds that are available for short message.
• Text template: Use the text templates already set in the
phone.
• Phone number: Attach a phone number.
• Name card: Attach your name card.
]
T9 languages: Choose between English or Spanish T9
language. For details on how to enter text, refer to page 26
(Using the T9 Mode).
]
Clear text: Deletes the written message.
]
Exit: Exit the text editor.
Inbox (Menu 1.1.2)
Received text messages, page messages, and email lists may be
searched and the contents may be viewed.
Received messages are displayed from newest to oldest.
1. Press the left soft key [Menu].
2. Press .
3. Select .
MessagesMessages
The following options are available.
]
Reply: Replies to the received message.
]
Forward: Forwards a received message to other recipients.
After recipients are entered, the message can be forwarded.
]
Return call: Call back the sender.
]
Extract: Extract picture, sound, text webpage and email
address from the message. They will be saved in My Folder,
phonebook or bookmarks.
]
Delete: Deletes the selected message from the Inbox.
Outbox
(Menu 1.1.3)
View lists and contents of sent messages in this menu and also
verify if transmission was successful.
The following options are available.
]
Forward: Forwards the current message to other recipients.
]
Delete: Deletes the selected message from the Outbox.
Draft
(Menu 1.1.4)
This menu option shows the preset message list. Scroll through the
list using the up/down navigation keys.
The following options are available.
]
Send: Sends the current message to other recipients.
]
Delete: Deletes the selected preset message.
Icon directive
[ ] Read SIM email
[ ] Unread SIM email
[ ] Read email
[ ] Unread email
[ ] Read SIM message
[ ] Unread SIM message
[ ] Read message
[ ] Unread message
[ ] Read delivery report
[ ] Unread delivery report
Icon directive
[ ] Sent SIM email
[ ] Sent email
[ ] Sent SIM message
[ ] Sent message
Voice Messages
This menu provides you with a quick way of accessing your voice
mailbox (if provided by your network).
Before using this feature, you must enter the voice server number
obtained from your service provider.
When new voicemail is received, the symbol will be displayed on
the screen. Please check with your network service provider for
details of their service in order to configure the handset
accordingly.
Listen to Voice Messages
(Menu 1.2.1)
Once this option has been selected, simply press the left soft key
[OK] to listen to voicemail messages. You may also hold down the
key in standby mode to listen to voicemail messages.
Voice Mailbox Number
(Menu 1.2.2)
You can input and set the number of voice mail.
Info Service
Info service messages are text messages sent by the network to
GSM phone users. They provide general information such as
weather reports, traffic news, taxis, pharmacies, and stock prices.
Each type of information is associated with a number, which can be
obtained from the service provider. When you receive an info
service message, a popup message will indicate a new message
receipt or the info service message will be displayed directly. In
standby mode, the following options are available when viewing the
info service message.
Receive
(Menu 1.3.1)
Ability to enable or disable the reception of broadcast messages.
41
40
MessagesMessages
Settings (Menu 1.1.5)
This menu allows you to set up default SMS information.
]
Delivery reports: Allows you to activate or deactivate the
report function. When this function is activated, the network
informs you whether or not your message has been delivered.
]
Reply with same service: Allows the recipient of your SMS
message to send you a reply via your message center, if the
service is provided by the network.
]
Message center number: Allows you to store or change the
number of your email gateway required when sending text
messages. You must obtain this number from your service
provider.
]
Subject: If you set it to on, allows you to enter the subject.
]
Bearer setting: You can select GSM or GPRS. Contact your
network operator or service provider for information related to
setting a selected bearer, pricing and connection speed.
GSM Only/GPRS Only
Delete All (Menu 1.1.6)
Allows you to delete all messages.
Menu 1.2
*
*
*
*
*
:
Shown only if network service provider supports this feature
*
:
Shown only if network service provider supports this feature
*
Menu 1.3
*
Voice Messages
This menu provides you with a quick way of accessing your voice
mailbox (if provided by your network).
Before using this feature, you must enter the voice server number
obtained from your service provider.
When new voicemail is received, the symbol will be displayed on
the screen. Please check with your network service provider for
details of their service in order to configure the handset
accordingly.
Listen to Voice Messages
(Menu 1.2.1)
Once this option has been selected, simply press the left soft key
[OK] to listen to voicemail messages. You may also hold down the
key in standby mode to listen to voicemail messages.
Voice Mailbox Number
(Menu 1.2.2)
You can input and set the number of voice mail.
Info Service
Info service messages are text messages sent by the network to
GSM phone users. They provide general information such as
weather reports, traffic news, taxis, pharmacies, and stock prices.
Each type of information is associated with a number, which can be
obtained from the service provider. When you receive an info
service message, a popup message will indicate a new message
receipt or the info service message will be displayed directly. In
standby mode, the following options are available when viewing the
info service message.
Receive
(Menu 1.3.1)
Ability to enable or disable the reception of broadcast messages.
41
40
MessagesMessages
Settings (Menu 1.1.5)
This menu allows you to set up default SMS information.
]
Delivery reports: Allows you to activate or deactivate the
report function. When this function is activated, the network
informs you whether or not your message has been delivered.
]
Reply with same service: Allows the recipient of your SMS
message to send you a reply via your message center, if the
service is provided by the network.
]
Message center number: Allows you to store or change the
number of your email gateway required when sending text
messages. You must obtain this number from your service
provider.
]
Subject: If you set it to on, allows you to enter the subject.
]
Bearer setting: You can select GSM or GPRS. Contact your
network operator or service provider for information related to
setting a selected bearer, pricing and connection speed.
GSM Only/GPRS Only
Delete All (Menu 1.1.6)
Allows you to delete all messages.
Menu 1.2
*
*
*
*
*
:
Shown only if network service provider supports this feature
*
:
Shown only if network service provider supports this feature
*
Menu 1.3
*
43
42
MessagesMessages
Inbox
(Menu 1.3.2)
The list of received broadcast messages can be searched and the
contents viewed.
Topics
(Menu 1.3.3)
To create new topics, press the left soft key [OK] and then select
the new topics menu by pressing the left soft key [Options].
You can Deactivate, Edit, Delete and Add new topics by
pressing the left soft key [OK].
Alert
(Menu 1.3.4)
Ability to select the alert type for a new message.
Auto Display
(Menu 1.3.5)
This option will automatically display all broadcast messages
received. Scroll through the messages using the up/down
navigation keys.
Languages (Menu 1.3.6)
This option allows you to select the language preferred. The cell
broadcast message will be displayed in the language selected.
If you use all languages supported by phone, select ‘Automatic’
at the bottom of the list.
Templates
There are 6 predefined messages in the list. You can view and edit
the template messages or create new messages.
• Please call me back
• I’m late. I will be there at
• Where are you now?
• I’m on the way.
• Top urgent. Please contact.
• I love you
The following options are available.
]
Edit: Allows you to write a new message or edit the selected
template message.
]
Delete: Allows you to delete the selected template message.
]
Send via text message: Sends the selected template
message by SMS.
]
Add new: Allows you to create new messages.
Name Card
This option allows you to make your own name card. Key in the
Name, Mobile number, Office number,Fax number and E-mail
address.
]
Edit: Allows you to write a new message or edit the selected
name card.
]
Delete: Allows you to delete the selected name card.
]
Send via text message: Sends the selected name card by
SMS.
Check Memory
You can check the current memory status for SMS.
Menu 1.4
Menu 1.5
Menu 1.6
43
42
MessagesMessages
Inbox
(Menu 1.3.2)
The list of received broadcast messages can be searched and the
contents viewed.
Topics
(Menu 1.3.3)
To create new topics, press the left soft key [OK] and then select
the new topics menu by pressing the left soft key [Options].
You can Deactivate, Edit, Delete and Add new topics by
pressing the left soft key [OK].
Alert
(Menu 1.3.4)
Ability to select the alert type for a new message.
Auto Display
(Menu 1.3.5)
This option will automatically display all broadcast messages
received. Scroll through the messages using the up/down
navigation keys.
Languages (Menu 1.3.6)
This option allows you to select the language preferred. The cell
broadcast message will be displayed in the language selected.
If you use all languages supported by phone, select ‘Automatic’
at the bottom of the list.
Templates
There are 6 predefined messages in the list. You can view and edit
the template messages or create new messages.
• Please call me back
• I’m late. I will be there at
• Where are you now?
• I’m on the way.
• Top urgent. Please contact.
• I love you
The following options are available.
]
Edit: Allows you to write a new message or edit the selected
template message.
]
Delete: Allows you to delete the selected template message.
]
Send via text message: Sends the selected template
message by SMS.
]
Add new: Allows you to create new messages.
Name Card
This option allows you to make your own name card. Key in the
Name, Mobile number, Office number,Fax number and E-mail
address.
]
Edit: Allows you to write a new message or edit the selected
name card.
]
Delete: Allows you to delete the selected name card.
]
Send via text message: Sends the selected name card by
SMS.
Check Memory
You can check the current memory status for SMS.
Menu 1.4
Menu 1.5
Menu 1.6
45
44
Call Register
You can check the record of missed, received, and dialed calls
only if the network supports the Calling Line Identification (CLI)
within the service area.
The number and name (if available) are displayed together with the
date and time at which the call was made. You can also view call
times and costs.
Missed Calls
This option lets you view the last 10 unanswered calls. You can
also:
• View the number if available and call it, or save it in the
phonebook
• Enter a new name for the number and save both in the
phonebook
• Send a message by this number
• Delete the call from the list
• Delete all missed calls from the list
Received Calls
This option lets you view the last 10 incoming calls. You can also:
• View the number if available and call it, or save it in the
phonebook
• Enter a new name for the number and save both in the
phonebook
• Send a message by this number
• Delete the call from the list
• Delete all incoming calls from the list
Dialed Calls
This option lets you view the last 10 outgoing calls(called or
Menu 2.1
Menu 2.2
Call Register
attempted). You can also:
• View the number if available and call it or save it in the phonebook
• Enter new name for the number and save both in the phonebook
• Send a message by this number
• Delete the call from the list
• Delete all incoming calls from the list
Delete Recent Calls
Allows you to delete Missed, Received and Dialed call lists. You
can delete all call lists at one time.
Call Durations
Allows you to view the duration of your incoming and outgoing calls.
You can also reset the call times.
The following timers are available:
Last Call (Menu 2.5.1)
Length of the last call.
Received Calls (Menu 2.5.2)
Length of the incoming calls.
Dialed Calls (Menu 2.5.3
)
Length of the outgoing calls.
All Calls (Menu 2.5.4)
Total length of all calls made and incoming calls since the timer was
last reset.
Menu 2.3
Menu 2.5
Menu 2.4
Notice The actual time invoiced for calls by your service provider
may vary, depending upon network features, rounding-off
for billing, and so forth.
45
44
Call Register
You can check the record of missed, received, and dialed calls
only if the network supports the Calling Line Identification (CLI)
within the service area.
The number and name (if available) are displayed together with the
date and time at which the call was made. You can also view call
times and costs.
Missed Calls
This option lets you view the last 10 unanswered calls. You can
also:
• View the number if available and call it, or save it in the
phonebook
• Enter a new name for the number and save both in the
phonebook
• Send a message by this number
• Delete the call from the list
• Delete all missed calls from the list
Received Calls
This option lets you view the last 10 incoming calls. You can also:
• View the number if available and call it, or save it in the
phonebook
• Enter a new name for the number and save both in the
phonebook
• Send a message by this number
• Delete the call from the list
• Delete all incoming calls from the list
Dialed Calls
This option lets you view the last 10 outgoing calls(called or
Menu 2.1
Menu 2.2
Call Register
attempted). You can also:
• View the number if available and call it or save it in the phonebook
• Enter new name for the number and save both in the phonebook
• Send a message by this number
• Delete the call from the list
• Delete all incoming calls from the list
Delete Recent Calls
Allows you to delete Missed, Received and Dialed call lists. You
can delete all call lists at one time.
Call Durations
Allows you to view the duration of your incoming and outgoing calls.
You can also reset the call times.
The following timers are available:
Last Call (Menu 2.5.1)
Length of the last call.
Received Calls (Menu 2.5.2)
Length of the incoming calls.
Dialed Calls (Menu 2.5.3
)
Length of the outgoing calls.
All Calls (Menu 2.5.4)
Total length of all calls made and incoming calls since the timer was
last reset.
Menu 2.3
Menu 2.5
Menu 2.4
Notice The actual time invoiced for calls by your service provider
may vary, depending upon network features, rounding-off
for billing, and so forth.
47
46
Call Register
GPRS Information
You can check the amount of data transferred over the network
through the GPRS information option. In addition, you can also view
how much time you are online.
WAP Information
(Menu 2.6.1)
You can check the data volume and the duration through WAP.
External Device
(Menu 2.6.2)
You can check the data volume and the duration through GPRS by
using an external device such as a serial port.
Total Data
(Menu 2.6.3)
You can check the total amount of data through WAP and an
external device.
Menu 2.6
Notice GPRS General Packet Radio Service
In Profiles, you can adjust and customize the phone tones for
different events, environments, or caller groups.
There are six preset profiles: Vibrate only, Silent, General,
Loud, Headset and Car. Silent, General and Loud profiles can be
customized to meet your needs.
Changing the profile
1. A list of profiles opens.
2. In the Profiles list, scroll to a desired profile and select
‘Activate’.
Customizing profiles (Personalize)
1. To modify a profile, scroll to the desired profile in the Profiles list
and select ‘Personalize’. A list of profile settings opens.
2. Scroll to the setting you want to change and press the up/down
navigation keys to open the following choices:
• Incoming call alert: To set the alert type for incoming call.
• Ringing tone: To set the ringing tone for voice calls, choose
one from the list. Scroll through the list and listen to the desired
tone prior to making a selection. Press any key to stop the
sound.
• Ringing volume: To set the volume level for the ringing tones.
• Message alert type: To set the alert type for messages.
• Message alert tone: To set the alert tone for messages.
• Key volume: To set the volume level for keypad tones.
Customizing profiles (Rename)
1. To modify a profile, scroll to the desired profile in the Profiles list
and select ‘Rename’.
2. You can rename a profile and give it any name you want. The
Vibrate only, Headset and Car profiles cannot be renamed.
Profiles
47
46
Call Register
GPRS Information
You can check the amount of data transferred over the network
through the GPRS information option. In addition, you can also view
how much time you are online.
WAP Information
(Menu 2.6.1)
You can check the data volume and the duration through WAP.
External Device
(Menu 2.6.2)
You can check the data volume and the duration through GPRS by
using an external device such as a serial port.
Total Data
(Menu 2.6.3)
You can check the total amount of data through WAP and an
external device.
Menu 2.6
Notice GPRS General Packet Radio Service
In Profiles, you can adjust and customize the phone tones for
different events, environments, or caller groups.
There are six preset profiles: Vibrate only, Silent, General,
Loud, Headset and Car. Silent, General and Loud profiles can be
customized to meet your needs.
Changing the profile
1. A list of profiles opens.
2. In the Profiles list, scroll to a desired profile and select
‘Activate’.
Customizing profiles (Personalize)
1. To modify a profile, scroll to the desired profile in the Profiles list
and select ‘Personalize’. A list of profile settings opens.
2. Scroll to the setting you want to change and press the up/down
navigation keys to open the following choices:
• Incoming call alert: To set the alert type for incoming call.
• Ringing tone: To set the ringing tone for voice calls, choose
one from the list. Scroll through the list and listen to the desired
tone prior to making a selection. Press any key to stop the
sound.
• Ringing volume: To set the volume level for the ringing tones.
• Message alert type: To set the alert type for messages.
• Message alert tone: To set the alert tone for messages.
• Key volume: To set the volume level for keypad tones.
Customizing profiles (Rename)
1. To modify a profile, scroll to the desired profile in the Profiles list
and select ‘Rename’.
2. You can rename a profile and give it any name you want. The
Vibrate only, Headset and Car profiles cannot be renamed.
Profiles
49
48
Settings
Alarm Clock
Set the alarm to ring at a specific time. In the Alarm Clock menu,
the following options are available.
On: Set the time(hour and minute) for activating the alarm.
1. Enter the menu.
2. Select [On] by pressing the right/left navigation keys.
3. If you want to set the time for activating the alarm, press the
down navigation key.
4. Enter the required time, press the down navigation key.
5. The following options are available.
• Once: The alarm rings only once and is then deactivated.
• Daily: The alarm rings every day at the same time.
• Weekly: The alarm rings every week on the same day and at
the same time.
• Monthly: The alarm rings every month on the same day and
at the same time.
6. Allows you to select the alarm melody by using the right/left
navigation keys.
7. Press the left soft key [Set].
Off: Cancel the alarm.
Menu 4.1
Date & Time Settings
Date & Time (Menu 4.2.1)
This option allows you to change the current time and date
displayed.
The following options are available:
]
Set date: Allows you to enter the day, month and year. You
can change the date format via the Date Format menu option.
Format : Allows you to change the time and date formats.
]
Date format
YYYY/MM/DD(year/month/day)
DD/MM/YYYY(day/month/year)
MM/DD/YYYY(month/day/year)
]
Set time: Allows you to enter the current time. You can choose
the time format via the Time Format menu option.
]
Time format
24 hours/12 hours
Auto Update (Menu 4.2.2)
Select On to set the phone to automatically update the time and
date according to the current time zone.
Menu 4.2
Settings
Notice If this option is set to On, the alarm will ring at the specified
time, even when the phone is switched off.
To stop the alarm when it rings, open the phone and press
the right soft key[Quit].
49
48
Settings
Alarm Clock
Set the alarm to ring at a specific time. In the Alarm Clock menu,
the following options are available.
On: Set the time(hour and minute) for activating the alarm.
1. Enter the menu.
2. Select [On] by pressing the right/left navigation keys.
3. If you want to set the time for activating the alarm, press the
down navigation key.
4. Enter the required time, press the down navigation key.
5. The following options are available.
• Once: The alarm rings only once and is then deactivated.
• Daily: The alarm rings every day at the same time.
• Weekly: The alarm rings every week on the same day and at
the same time.
• Monthly: The alarm rings every month on the same day and
at the same time.
6. Allows you to select the alarm melody by using the right/left
navigation keys.
7. Press the left soft key [Set].
Off: Cancel the alarm.
Menu 4.1
Date & Time Settings
Date & Time (Menu 4.2.1)
This option allows you to change the current time and date
displayed.
The following options are available:
]
Set date: Allows you to enter the day, month and year. You
can change the date format via the Date Format menu option.
Format : Allows you to change the time and date formats.
]
Date format
YYYY/MM/DD(year/month/day)
DD/MM/YYYY(day/month/year)
MM/DD/YYYY(month/day/year)
]
Set time: Allows you to enter the current time. You can choose
the time format via the Time Format menu option.
]
Time format
24 hours/12 hours
Auto Update (Menu 4.2.2)
Select On to set the phone to automatically update the time and
date according to the current time zone.
Menu 4.2
Settings
Notice If this option is set to On, the alarm will ring at the specified
time, even when the phone is switched off.
To stop the alarm when it rings, open the phone and press
the right soft key[Quit].
51
50
Phone Settings
Many different features of your phone can be customized to suit
your preferences. All of these features are accessed via the
Phone Settings menu.
Display Settings (Menu 4.3.1)
]
Wallpaper: You can set up the screen displayed on the LCD
screen in the standby mode.
]
Backlight: You can select whether or not the phone uses the
backlight. A marginal increase in the standby/talk time can be
achieved by turning the backlight off.
- Off means that the backlight is never on.
- 10 seconds turns the backlight off 10 seconds after the
last key was pressed.
- 30 seconds turns the backlight off 30 seconds after the
last key was pressed.
- 60 seconds turns the backlight off 60 seconds after the
last key was pressed.
- Always on turns the backlight always on while flip is
opened.
]
Contrast: This option allows you to adjust the contrast of the
LCD screen by pressing the navigation key.
Power on Sound (Menu 4.3.2)
This menu enables or disables the phone sounds when it is
switched on or off
]
On: The phone sounds when it is switched on, and when
switched off.
]
Off: Neither does the phone sounds when it is switched on or
off.
Menu 4.3
SettingsSettings
*
:
Shown only if network service provider supports this feature
Languages (Menu 4.3.3)
You can select the display language. When the language option is
set to Automatic, the language is automatically selected according
to the language of the SIM card used. English will be set if the
language on the SIM card is not supported in the phone.
LED indicator (Menu 4.3.4)
This option allows you to select whether or not the service light on
the top of the phone is used.
The following options are available.
]
Enable:
The service light flashes when the phone is ready for use.
]
Disable: The service light is not used.
*
Call Settings
To change the settings for call diverting:
Call Divert (Menu 4.4.1)
When this network service is activated, you can direct your incoming
calls to another number, for example, to your voice mailbox number.
For details, contact your service provider.
The following options are available:
]
All voice calls: Diverts voice calls unconditionally.
]
All data calls: Diverts to a number with a PC connection
unconditionally.
*
Menu 4.4
51
50
Phone Settings
Many different features of your phone can be customized to suit
your preferences. All of these features are accessed via the
Phone Settings menu.
Display Settings (Menu 4.3.1)
]
Wallpaper: You can set up the screen displayed on the LCD
screen in the standby mode.
]
Backlight: You can select whether or not the phone uses the
backlight. A marginal increase in the standby/talk time can be
achieved by turning the backlight off.
- Off means that the backlight is never on.
- 10 seconds turns the backlight off 10 seconds after the
last key was pressed.
- 30 seconds turns the backlight off 30 seconds after the
last key was pressed.
- 60 seconds turns the backlight off 60 seconds after the
last key was pressed.
- Always on turns the backlight always on while flip is
opened.
]
Contrast: This option allows you to adjust the contrast of the
LCD screen by pressing the navigation key.
Power on Sound (Menu 4.3.2)
This menu enables or disables the phone sounds when it is
switched on or off
]
On: The phone sounds when it is switched on, and when
switched off.
]
Off: Neither does the phone sounds when it is switched on or
off.
Menu 4.3
SettingsSettings
*
:
Shown only if network service provider supports this feature
Languages (Menu 4.3.3)
You can select the display language. When the language option is
set to Automatic, the language is automatically selected according
to the language of the SIM card used. English will be set if the
language on the SIM card is not supported in the phone.
LED indicator (Menu 4.3.4)
This option allows you to select whether or not the service light on
the top of the phone is used.
The following options are available.
]
Enable:
The service light flashes when the phone is ready for use.
]
Disable: The service light is not used.
*
Call Settings
To change the settings for call diverting:
Call Divert (Menu 4.4.1)
When this network service is activated, you can direct your incoming
calls to another number, for example, to your voice mailbox number.
For details, contact your service provider.
The following options are available:
]
All voice calls: Diverts voice calls unconditionally.
]
All data calls: Diverts to a number with a PC connection
unconditionally.
*
Menu 4.4
53
52
]
All fax calls: Diverts to a number with a fax connection
unconditionally.
• Activate: Activates the corresponding service.
- To voice mail: Forwards to voice mail center. This function
does not include All data calls and All fax calls menus.
- To other number: Inputs the number for diverting.
• Cancel: Cancels the corresponding service.
• View status: Checking the status of the service.
]
Cancel all: Cancels all call divert service.
Answer Mode (Menu 4.4.2)
Allows you to determine when to answer the phone.
]
Flip open: This option allows you to answer a call simply by
opening the flip.
]
Any key: You can answer an incoming call by pressing any
key, except the key or the right soft key.
]
Only send key: You can answer an incoming call by only
pressing the key.
Send My Number
(Menu 4.4.3)
This network service allows you to set your phone number to be
displayed (On) or hidden (Off) from the person to whom you are
calling. Select Set by network to reset the phone to the setting
that you have agreed upon with your service provider.
Call Waiting (Menu 4.4.4)
The network will notify you of a new incoming call while you have a
call in progress. Select Activate to request the network to
activate call waiting, Cancel to request the network to deactivate
call waiting, or View status, to check if the function is active or
not.
SettingsSettings
Minute Minder (Menu 4.4.5)
This option allows you to specify whether the phone must beep
every minute during an outgoing call to keep you informed of the
length of the call.
Auto Redial (Menu 4.4.6)
Select On, and your phone will make a maximum of three attempts
to connect the call after an unsuccessful call attempt.
Security Settings
Various codes and passwords are used to protect the features of
your phone. They are described in the following sections (see
pages 22).
PIN Code Request
(Menu 4.5.1)
When the PIN code request feature is enabled, you must enter your
PIN each time you switch the phone on. Consequently, any person
who does not have your PIN cannot use your phone without your
approval.
The following options are available:
• Enable: You must enter the PIN each time the phone is
switched on.
• Disable: The phone connects directly to the network when you
switch it on.
*
*
*
:
Shown only if network service provider supports this feature
Note Before disabling the PIN code request feature, you must enter
your PIN
Menu 4.5
53
52
]
All fax calls: Diverts to a number with a fax connection
unconditionally.
• Activate: Activates the corresponding service.
- To voice mail: Forwards to voice mail center. This function
does not include All data calls and All fax calls menus.
- To other number: Inputs the number for diverting.
• Cancel: Cancels the corresponding service.
• View status: Checking the status of the service.
]
Cancel all: Cancels all call divert service.
Answer Mode (Menu 4.4.2)
Allows you to determine when to answer the phone.
]
Flip open: This option allows you to answer a call simply by
opening the flip.
]
Any key: You can answer an incoming call by pressing any
key, except the key or the right soft key.
]
Only send key: You can answer an incoming call by only
pressing the key.
Send My Number
(Menu 4.4.3)
This network service allows you to set your phone number to be
displayed (On) or hidden (Off) from the person to whom you are
calling. Select Set by network to reset the phone to the setting
that you have agreed upon with your service provider.
Call Waiting (Menu 4.4.4)
The network will notify you of a new incoming call while you have a
call in progress. Select Activate to request the network to
activate call waiting, Cancel to request the network to deactivate
call waiting, or View status, to check if the function is active or
not.
SettingsSettings
Minute Minder (Menu 4.4.5)
This option allows you to specify whether the phone must beep
every minute during an outgoing call to keep you informed of the
length of the call.
Auto Redial (Menu 4.4.6)
Select On, and your phone will make a maximum of three attempts
to connect the call after an unsuccessful call attempt.
Security Settings
Various codes and passwords are used to protect the features of
your phone. They are described in the following sections (see
pages 22).
PIN Code Request
(Menu 4.5.1)
When the PIN code request feature is enabled, you must enter your
PIN each time you switch the phone on. Consequently, any person
who does not have your PIN cannot use your phone without your
approval.
The following options are available:
• Enable: You must enter the PIN each time the phone is
switched on.
• Disable: The phone connects directly to the network when you
switch it on.
*
*
*
:
Shown only if network service provider supports this feature
Note Before disabling the PIN code request feature, you must enter
your PIN
Menu 4.5
55
54
SettingsSettings
Fixed Dial Number (FDN) (Menu 4.5.2)
Allows you to restrict your outgoing calls to selected phone
numbers, if this function is supported by your SIM card. The PIN2
code is required.
The following options are available:
]
Enable: You can only call phone numbers stored in the
phonebook. You must enter your PIN2.
]
Disable: You can call any number.
]
Number list: You can view the number list saved as fixed dial
number.
Change Codes (Menu 4.5.3)
The Change codes feature allows you to change your current
password to a new one. You must enter the current password
before you can specify a new one.
You can change the access codes: Security code, PIN1 code,
PIN2 code
Note
PIN: Personal Identification Number.
Note Not all SIM cards have a PIN2. If your SIM card does not, this
menu option is not displayed.
*
:
Shown only if network service provider supports this feature
Network Settings
The Network Settings feature enables you to indicate whether the
network used when roaming(outside your home area) is selected
Automatic, Manual, and Preferred.
Automatic
(Menu 4.6.1)
Allows you to set the phone to automatically search for and select
one of the cellular networks available in your area.
The phone will be set to Automatic even though the power is off
and on.
Manual
(Menu 4.6.2)
Allows you to select the desired network manually from a list of
networks. If the connection to the manually selected network is lost,
the phone will sound an error tone and ask you to select a network
again. The selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card is in your
phone. The phone lets you select another network if the phone fails
to access the selected network. If you switch off the phone, the
phone will be reset to Automatic.
Preferred
(Menu 4.6.3)
You can set a list of preferred networks the handset should attempt
to register with first, before attempting to register to any other
networks. This list is created from the handset’s predefined list of
known networks.
Menu 4.6
Note You can select a network other than your home network only if
it has a valid roaming agreement with your home network.
*
55
54
SettingsSettings
Fixed Dial Number (FDN) (Menu 4.5.2)
Allows you to restrict your outgoing calls to selected phone
numbers, if this function is supported by your SIM card. The PIN2
code is required.
The following options are available:
]
Enable: You can only call phone numbers stored in the
phonebook. You must enter your PIN2.
]
Disable: You can call any number.
]
Number list: You can view the number list saved as fixed dial
number.
Change Codes (Menu 4.5.3)
The Change codes feature allows you to change your current
password to a new one. You must enter the current password
before you can specify a new one.
You can change the access codes: Security code, PIN1 code,
PIN2 code
Note
PIN: Personal Identification Number.
Note Not all SIM cards have a PIN2. If your SIM card does not, this
menu option is not displayed.
*
:
Shown only if network service provider supports this feature
Network Settings
The Network Settings feature enables you to indicate whether the
network used when roaming(outside your home area) is selected
Automatic, Manual, and Preferred.
Automatic
(Menu 4.6.1)
Allows you to set the phone to automatically search for and select
one of the cellular networks available in your area.
The phone will be set to Automatic even though the power is off
and on.
Manual
(Menu 4.6.2)
Allows you to select the desired network manually from a list of
networks. If the connection to the manually selected network is lost,
the phone will sound an error tone and ask you to select a network
again. The selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card is in your
phone. The phone lets you select another network if the phone fails
to access the selected network. If you switch off the phone, the
phone will be reset to Automatic.
Preferred
(Menu 4.6.3)
You can set a list of preferred networks the handset should attempt
to register with first, before attempting to register to any other
networks. This list is created from the handset’s predefined list of
known networks.
Menu 4.6
Note You can select a network other than your home network only if
it has a valid roaming agreement with your home network.
*
57
Organizer
Schedule
When you enter this menu a calendar will be displayed. Top of the
screen indicates sections for date. Square cursor is used to locate
a particular day. The under bar on the calendar indicates a
schedule or memo on that day. This function helps to remind you of
the schedule and memo. The phone will sound an alarm tone if it
has been set for a specific note.
For changing the day, month, and year.
Menu 5.1
Note Your phone should be switched on to use this function.
• View
Press [Options] to delete or edit the note you selected.
• Edit
Allows you to edit the schedule.
• Delete
Allows you to delete the schedule.
• Add new
You can edit maximum of 30 characters and create up to 30
notes.
• Calendar
Allows you to consult the calendar.
Key Description
up/down navigation key
left/right navigation key
Weekly
Daily
56
Settings
GPRS Settings
GPRS (General Packet Radio Service) is a technology that allows
mobile phones to be used for sending and receiving data over the
mobile network. GPRS is a data bearer that enables wireless
access to data network such as the Internet.
The applications which use GPRS are WAP, SMS message.
Before you can use GPRS technology:
• You need to subscribe to the GPRS service. For availability and
subscription to GPRS service, contact your network operator or
service provider.
• You need to save the GPRS settings for the applications used
over GPRS.
Fees for GPRS and applications
Both the active GPRS connection and the applications used over
GPRS, for example WAP service, sending and receiving data and
SMS messages, require a fee. For more detailed information on
fees, contact your network operator or service provider.
External Device
When you use Internet via GPRS by using an external device, you
can set the following six profiles: Rename, APN, IP address,
DNS, User ID, and Password.
Reset Settings
You can easily reset your phone to its default configuration. To do
so, proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Menu 4.7
Menu 4.8
Note The password is preset to 0000.
57
Organizer
Schedule
When you enter this menu a calendar will be displayed. Top of the
screen indicates sections for date. Square cursor is used to locate
a particular day. The under bar on the calendar indicates a
schedule or memo on that day. This function helps to remind you of
the schedule and memo. The phone will sound an alarm tone if it
has been set for a specific note.
For changing the day, month, and year.
Menu 5.1
Note Your phone should be switched on to use this function.
• View
Press [Options] to delete or edit the note you selected.
• Edit
Allows you to edit the schedule.
• Delete
Allows you to delete the schedule.
• Add new
You can edit maximum of 30 characters and create up to 30
notes.
• Calendar
Allows you to consult the calendar.
Key Description
up/down navigation key
left/right navigation key
Weekly
Daily
56
Settings
GPRS Settings
GPRS (General Packet Radio Service) is a technology that allows
mobile phones to be used for sending and receiving data over the
mobile network. GPRS is a data bearer that enables wireless
access to data network such as the Internet.
The applications which use GPRS are WAP, SMS message.
Before you can use GPRS technology:
• You need to subscribe to the GPRS service. For availability and
subscription to GPRS service, contact your network operator or
service provider.
• You need to save the GPRS settings for the applications used
over GPRS.
Fees for GPRS and applications
Both the active GPRS connection and the applications used over
GPRS, for example WAP service, sending and receiving data and
SMS messages, require a fee. For more detailed information on
fees, contact your network operator or service provider.
External Device
When you use Internet via GPRS by using an external device, you
can set the following six profiles: Rename, APN, IP address,
DNS, User ID, and Password.
Reset Settings
You can easily reset your phone to its default configuration. To do
so, proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Menu 4.7
Menu 4.8
Note The password is preset to 0000.
59
58
• Scheduler tone
The phone can sound an alarm tone when the scheduled date for
an event has been reached with this option.
• View all schedules
Shows the notes that are set for all days. Use the up/down
navigation keys to browse through the note lists. You can use the
menu by press the left soft key [Options].
• Go to date
Allows you to jump to a specific date.
• Delete past
Delete past schedule event that has already been notified.
• Delete all
Delete all schedules. You are asked to confirm your action.
OrganizerOrganizer
Memo
To write, edit and delete a memo on a specific date, proceed as
follows.
1. Scroll to highlight Memo.
2. Press the left soft key [Add].
3. Input the memo and press the left soft key [Options].
The following options are available.
]
Save: Allows you to save the memo.
]
T9 languages: Allows you to select the T9 language to use in
memo.
]
Exit editor: Allows you to exit in memo editor.
Or
1. Select a Memo.
2. Press the left soft key [Select].
3. Press the left soft key [Options].
The following options are available.
]
Edit: If you select a memo that already exists, you can press
the left soft key [Options → Edit] to edit the memo displayed.
]
Delete: Allows you to delete the memo. You can press the left
soft key [Options → Delete] to edit the memo displayed.
]
Add new: Add a new memo, up to 20 memos and 40
characters per each memo.
]
Delete all: Allows you to delete all memos. You are asked to
confirm your action.
Menu 5.2
Note You can see Edit, Delete, View all schedules, Delete past, and
Delete all menus dependent on setting of the schedule.
Note PC synchronization software is available separately from LG.
59
58
• Scheduler tone
The phone can sound an alarm tone when the scheduled date for
an event has been reached with this option.
• View all schedules
Shows the notes that are set for all days. Use the up/down
navigation keys to browse through the note lists. You can use the
menu by press the left soft key [Options].
• Go to date
Allows you to jump to a specific date.
• Delete past
Delete past schedule event that has already been notified.
• Delete all
Delete all schedules. You are asked to confirm your action.
OrganizerOrganizer
Memo
To write, edit and delete a memo on a specific date, proceed as
follows.
1. Scroll to highlight Memo.
2. Press the left soft key [Add].
3. Input the memo and press the left soft key [Options].
The following options are available.
]
Save: Allows you to save the memo.
]
T9 languages: Allows you to select the T9 language to use in
memo.
]
Exit editor: Allows you to exit in memo editor.
Or
1. Select a Memo.
2. Press the left soft key [Select].
3. Press the left soft key [Options].
The following options are available.
]
Edit: If you select a memo that already exists, you can press
the left soft key [Options → Edit] to edit the memo displayed.
]
Delete: Allows you to delete the memo. You can press the left
soft key [Options → Delete] to edit the memo displayed.
]
Add new: Add a new memo, up to 20 memos and 40
characters per each memo.
]
Delete all: Allows you to delete all memos. You are asked to
confirm your action.
Menu 5.2
Note You can see Edit, Delete, View all schedules, Delete past, and
Delete all menus dependent on setting of the schedule.
Note PC synchronization software is available separately from LG.
61
60
OrganizerOrganizer
Phonebook
You can store phone numbers and their corresponding names in
the memory of your SIM card. In addition, you can store up to 100
numbers and names in the phone memory. The SIM card and
phone memories, although physically separate, are used as if they
were a single entity, called the phonebook.
1. To use the Phonebook, press the right soft key [Names] in
the standby mode.
2. To use the Phonebook, press the left soft key [Menu] in the
standby mode and select the Organizer.
Search (Menu 5.3.1)
1. When the idle screen is displayed, press the right soft key
[Names]. You are asked to enter a name.
2. Enter the start of the name that you wish to find and press
the left soft key [Search].
3. If you want to edit, delete, copy an entry, select [Options].
4. Once you have found the required entry, press the to dial
the number.
• View detail: To view in detail the selected name.
• Edit: You can edit the name, number, E-mail group and memo
by press the left soft key [OK].
• Delete: You can delete an entry.
• Write text message: You can write text a message. For
further details, see page 37.
• Copy: You can copy an entry from SIM to phone or from phone
to SIM.
Menu 5.3
Note To use the Phonebook, press the right soft key [Names] in
standby mode or press the left soft key [Menu], , .
Note You can also scroll through the phonebook from the
beginning, by pressing the left soft key [Search] directly.
Add New (Menu 5.3.2)
You can add a phonebook entry by using this function. Phone
memory capacity is 100 entries. SIM card memory capacity
depends on the cellular service provider. You can also save 20
characters of name in the phone memory, and save characters in
the SIM card. The number of characters is dependent on the SIM.
1. Open the phonebook first by pressing the right soft key
[Names] in standby mode.
2. Scroll to highlight Add New, and press the left soft key [OK].
3. Enter a name and then press the down navigation key.
4. Enter a number and then press the down navigation key.
5. You can set a group for the entry by pressing the right/left
navigation key.
6. Press left soft key [Save].
• Main Number: You can select the main number out of your
mobile, home or office numbers. Choose the one that is most
often used. The main number will be displayed first, if you set
this.
61
60
OrganizerOrganizer
Phonebook
You can store phone numbers and their corresponding names in
the memory of your SIM card. In addition, you can store up to 100
numbers and names in the phone memory. The SIM card and
phone memories, although physically separate, are used as if they
were a single entity, called the phonebook.
1. To use the Phonebook, press the right soft key [Names] in
the standby mode.
2. To use the Phonebook, press the left soft key [Menu] in the
standby mode and select the Organizer.
Search (Menu 5.3.1)
1. When the idle screen is displayed, press the right soft key
[Names]. You are asked to enter a name.
2. Enter the start of the name that you wish to find and press
the left soft key [Search].
3. If you want to edit, delete, copy an entry, select [Options].
4. Once you have found the required entry, press the to dial
the number.
• View detail: To view in detail the selected name.
• Edit: You can edit the name, number, E-mail group and memo
by press the left soft key [OK].
• Delete: You can delete an entry.
• Write text message: You can write text a message. For
further details, see page 37.
• Copy: You can copy an entry from SIM to phone or from phone
to SIM.
Menu 5.3
Note To use the Phonebook, press the right soft key [Names] in
standby mode or press the left soft key [Menu], , .
Note You can also scroll through the phonebook from the
beginning, by pressing the left soft key [Search] directly.
Add New (Menu 5.3.2)
You can add a phonebook entry by using this function. Phone
memory capacity is 100 entries. SIM card memory capacity
depends on the cellular service provider. You can also save 20
characters of name in the phone memory, and save characters in
the SIM card. The number of characters is dependent on the SIM.
1. Open the phonebook first by pressing the right soft key
[Names] in standby mode.
2. Scroll to highlight Add New, and press the left soft key [OK].
3. Enter a name and then press the down navigation key.
4. Enter a number and then press the down navigation key.
5. You can set a group for the entry by pressing the right/left
navigation key.
6. Press left soft key [Save].
• Main Number: You can select the main number out of your
mobile, home or office numbers. Choose the one that is most
often used. The main number will be displayed first, if you set
this.
63
62
OrganizerOrganizer
Speed Dials
(Menu 5.3.3)
You can assign any of the keys, to with a name list entry.
You can call directly by pressing this key for 2~3 seconds.
1. Open the phonebook first by pressing the right soft key [Names]
in a standby mode.
2. Scroll to Speed Dials, then press the left soft key [OK].
3. If you want to add a number to speed dial, select <Empty>.
Then, you can search the name from the phonebook.
4. Select the name from the speed dial. You can change and delete
the name. In addition, you can call by this number and write text
message.
Caller Groups
(Menu 5.3.4)
There are 7 predefined groups as well as one additional group
labeled Others where you can create your own lists.
1. You can set the phone to ring in a specific way and display a
preselected graphic icon when a particular person calls you.
2. Scroll to Caller Groups then press the left soft key [OK] to enter
this menu.
3. Every Group list will be displayed : Family, VIP, Friends,
Colleague, Group 1, Group 2, Others.
4. Select the Group name that you want to manage by pressing
the left soft key [Options].
5. You will see the following submenus under the predefined groups
except for the Others group.
• Member list: Allows you to see the member list in the group.
• Group ring tone: Allows you to select the ring tone to be used
when you receive a voice phone call from a person in the group.
• Group icon: Allows you to select the graphic icon to be
displayed when you receive a call from a person in the group.
• Add member: Allows you to add the member to the group.
• Delete member: Allows you to delete the member in the
group.
• Rename: Allows you to assign a name to the group.
Copy All
(Menu 5.3.5)
You can copy or move entries from the SIM card memory to the
phone memory and vice versa.
]
SIM to Phone: You can copy the entry from the SIM card to
phone memory.
]
Phone to SIM: You can copy the entry from the phone
memory to the SIM card.
The following options are available:
• Keep original: When copying, Original Dial Number is kept.
• Delete original: When copying, Original Dial Number will
be erased.
Delete All
(Menu 5.3.6)
You can delete all entries in the SIM, and Phone. This function
requires the security code except for Voice.
Press the key to return to the standby mode.
63
62
OrganizerOrganizer
Speed Dials
(Menu 5.3.3)
You can assign any of the keys, to with a name list entry.
You can call directly by pressing this key for 2~3 seconds.
1. Open the phonebook first by pressing the right soft key [Names]
in a standby mode.
2. Scroll to Speed Dials, then press the left soft key [OK].
3. If you want to add a number to speed dial, select <Empty>.
Then, you can search the name from the phonebook.
4. Select the name from the speed dial. You can change and delete
the name. In addition, you can call by this number and write text
message.
Caller Groups
(Menu 5.3.4)
There are 7 predefined groups as well as one additional group
labeled Others where you can create your own lists.
1. You can set the phone to ring in a specific way and display a
preselected graphic icon when a particular person calls you.
2. Scroll to Caller Groups then press the left soft key [OK] to enter
this menu.
3. Every Group list will be displayed : Family, VIP, Friends,
Colleague, Group 1, Group 2, Others.
4. Select the Group name that you want to manage by pressing
the left soft key [Options].
5. You will see the following submenus under the predefined groups
except for the Others group.
• Member list: Allows you to see the member list in the group.
• Group ring tone: Allows you to select the ring tone to be used
when you receive a voice phone call from a person in the group.
• Group icon: Allows you to select the graphic icon to be
displayed when you receive a call from a person in the group.
• Add member: Allows you to add the member to the group.
• Delete member: Allows you to delete the member in the
group.
• Rename: Allows you to assign a name to the group.
Copy All
(Menu 5.3.5)
You can copy or move entries from the SIM card memory to the
phone memory and vice versa.
]
SIM to Phone: You can copy the entry from the SIM card to
phone memory.
]
Phone to SIM: You can copy the entry from the phone
memory to the SIM card.
The following options are available:
• Keep original: When copying, Original Dial Number is kept.
• Delete original: When copying, Original Dial Number will
be erased.
Delete All
(Menu 5.3.6)
You can delete all entries in the SIM, and Phone. This function
requires the security code except for Voice.
Press the key to return to the standby mode.
65
64
Organizer
Settings
(Menu 5.3.7)
1. Set memory: Scroll to highlight the Set memory option,
then press the left soft key [OK].
• If you select Variable when adding entry, the phone will ask
where to store.
• If you select SIM or Phone, the phone will store an entry to
the SIM or the phone.
2. Search by: Scroll to highlight the Search by option, then
press the left soft key [OK].
• If you select Variable, the phone will ask how to search.
• If you select Name or Number, the phone will search an
entry by Name or the Number.
3. Set View Detail:
• If you select On, you can view the information of each member
in details. (Menu 5.3.4)
• If you select Off, you can view only name of each member.
(Menu 5.3.4)
Information
(Menu 5.3.8)
]
Check memory: You can check how many names and
numbers are stored in the phonebook (SIM card and phone
memories).
]
Own number: Allows you to display your phone number in the
SIM card.
Fun & Tools
Game
When you select this game, the following options are available.
New game: Allows you to start a game.
High score: Enables you to view the highest score recorded for
the selected game.
Instruction: Help text on how to play the game.
Key info: Describes the buttons used by the game.
Continue: Allows you to continue playing the game.
Note The control keys are different depending on the game.
Each game includes an introduction on the main control keys.
The common keys are listed below.
Menu 6.1
[Common Key Function]
left/right soft keys : Game menu
: Game start
*
*
:
Shown only if network service provider supports this feature
65
64
Organizer
Settings
(Menu 5.3.7)
1. Set memory: Scroll to highlight the Set memory option,
then press the left soft key [OK].
• If you select Variable when adding entry, the phone will ask
where to store.
• If you select SIM or Phone, the phone will store an entry to
the SIM or the phone.
2. Search by: Scroll to highlight the Search by option, then
press the left soft key [OK].
• If you select Variable, the phone will ask how to search.
• If you select Name or Number, the phone will search an
entry by Name or the Number.
3. Set View Detail:
• If you select On, you can view the information of each member
in details. (Menu 5.3.4)
• If you select Off, you can view only name of each member.
(Menu 5.3.4)
Information
(Menu 5.3.8)
]
Check memory: You can check how many names and
numbers are stored in the phonebook (SIM card and phone
memories).
]
Own number: Allows you to display your phone number in the
SIM card.
Fun & Tools
Game
When you select this game, the following options are available.
New game: Allows you to start a game.
High score: Enables you to view the highest score recorded for
the selected game.
Instruction: Help text on how to play the game.
Key info: Describes the buttons used by the game.
Continue: Allows you to continue playing the game.
Note The control keys are different depending on the game.
Each game includes an introduction on the main control keys.
The common keys are listed below.
Menu 6.1
[Common Key Function]
left/right soft keys : Game menu
: Game start
*
*
:
Shown only if network service provider supports this feature
67
66
Fun & ToolsFun & Tools
Calculator
Using this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions: addition,
subtraction, multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Use the navigation keys to select a sign for calculation.
3. To calculate the result, press the left soft key [Result] or key.
Menu 6.4
Unit Converter
This converts any measurement into a unit you want.
There are 4 types that can be converted into units: Length,
Surface, Weight, and Volume.
1. You can select one of four unit types by pressing the left soft key
[Unit].
2. Select the standard value by using the left/right navigation keys.
3. Select the unit you want to convert by pressing the up/down
navigation keys.
4. You can check the converted value for the unit you want. Also,
you can input a decimal number by pressing the key.
Menu 6.3
Note To include a decimal point, press the key.
Note Please see the mMode services on page 69 for further
download information.
My Folder
Enables you to download pictures or sounds which can be used as
ringtone. You can view, listen, delete or rename downloaded data.
In the My folder menu, the following options are available:
Picture (Menu 6.2.1)
1. Edit Title
2. Delete
3. Delete all
Animation
(Menu 6.2.2)
1. Edit Title
2. Delete
3. Delete all
Sound (Menu 6.2.3)
1. Edit Title
2. Delete
3. Delete all
Edit Title: You can edit the title for each downloaded content.
Delete: You can delete each downloaded content.
Delete all: You can delete all downloaded content.
Menu 6.2
67
66
Fun & ToolsFun & Tools
Calculator
Using this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions: addition,
subtraction, multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Use the navigation keys to select a sign for calculation.
3. To calculate the result, press the left soft key [Result] or key.
Menu 6.4
Unit Converter
This converts any measurement into a unit you want.
There are 4 types that can be converted into units: Length,
Surface, Weight, and Volume.
1. You can select one of four unit types by pressing the left soft key
[Unit].
2. Select the standard value by using the left/right navigation keys.
3. Select the unit you want to convert by pressing the up/down
navigation keys.
4. You can check the converted value for the unit you want. Also,
you can input a decimal number by pressing the key.
Menu 6.3
Note To include a decimal point, press the key.
Note Please see the mMode services on page 69 for further
download information.
My Folder
Enables you to download pictures or sounds which can be used as
ringtone. You can view, listen, delete or rename downloaded data.
In the My folder menu, the following options are available:
Picture (Menu 6.2.1)
1. Edit Title
2. Delete
3. Delete all
Animation
(Menu 6.2.2)
1. Edit Title
2. Delete
3. Delete all
Sound (Menu 6.2.3)
1. Edit Title
2. Delete
3. Delete all
Edit Title: You can edit the title for each downloaded content.
Delete: You can delete each downloaded content.
Delete all: You can delete all downloaded content.
Menu 6.2
You can access various WAP(Wireless Application Protocol)
services such as banking, news, weather reports, and flight
information. These services are specially designed for mobile
phones and they are maintained by your service provider.
Data services are provided at an additional cost, please check with
your service provider for further information. Service providers will
also give you instructions on how to use their services.
Please contact your service provider to open a data account. To
use the Web Browser, you must indicate your phone number via
the Own number menu option (See page 64 for further details.)
Once connected, mMode homepage is displayed. The content
depends on the service provider.
Navigating mMode Services Using the Phone
Keys
When using mMode services, the phone keys function differently
from normal phone mode.
Key Description
up/down navigation key Scroll each line of the content area
left navigation key Return to the previous page
Return to the startup homepage
Using the mMode Menu
There are various menu options available when surfing the Wireless
Web.
69
68
Fun & Tools
World Time
Allows you to check the current Greenwich Mean Time(GMT) and
51 major cities around the world, using the left/right navigation
keys.
The screen shows the city name, current date and time.
To select the time zone in which you are located, proceed as
follows:
1. Select the city corresponding to your time zone by pressing the
left/right navigation keys one or more times. The local date and
time are displayed.
2. Press the left soft key [Options].
3. If you want to set, press key.
4. If you want to set Summer time, press the key in
Options menu.
Menu 6.5
mMode services
Note The Browser menus may vary, depending on your version of
the browser.
You can access various WAP(Wireless Application Protocol)
services such as banking, news, weather reports, and flight
information. These services are specially designed for mobile
phones and they are maintained by your service provider.
Data services are provided at an additional cost, please check with
your service provider for further information. Service providers will
also give you instructions on how to use their services.
Please contact your service provider to open a data account. To
use the Web Browser, you must indicate your phone number via
the Own number menu option (See page 64 for further details.)
Once connected, mMode homepage is displayed. The content
depends on the service provider.
Navigating mMode Services Using the Phone
Keys
When using mMode services, the phone keys function differently
from normal phone mode.
Key Description
up/down navigation key Scroll each line of the content area
left navigation key Return to the previous page
Return to the startup homepage
Using the mMode Menu
There are various menu options available when surfing the Wireless
Web.
69
68
Fun & Tools
World Time
Allows you to check the current Greenwich Mean Time(GMT) and
51 major cities around the world, using the left/right navigation
keys.
The screen shows the city name, current date and time.
To select the time zone in which you are located, proceed as
follows:
1. Select the city corresponding to your time zone by pressing the
left/right navigation keys one or more times. The local date and
time are displayed.
2. Press the left soft key [Options].
3. If you want to set, press key.
4. If you want to set Summer time, press the key in
Options menu.
Menu 6.5
mMode services
Note The Browser menus may vary, depending on your version of
the browser.
71
70
mMode services
]
Home: Connect the homepage which was set in active profile.
]
Reload: Connect the server again and then bring back the
page.
]
Bookmarks: Set the current homepage as a new bookmark or
move the established bookmark.
]
Set as bookmarks: Save the current URL as a bookmark.
You can also edit the bookmark title.
]
Message: Write and save the short message.
]
Push message: Save the push message.
]
Go to URL: Connect to the specific URL after editing.
]
Clear cache: Remove the contents of cache memory .
mMode services
Home
Connect to a homepage. The homepage may be the site which is
defined in the activated profile. It will be defined by the Service
Provider if you have not defined it in the activated profile.
Bookmarks
You can save up to 50 bookmarks. Scroll to the desired bookmark
and pressing left soft key [Options] to operate the following
options.
]
Connect: Connect to selected bookmark.
]
Add new: Save a new bookmark manually.
]
Edit: Edit the title and address of bookmark.
]
Delete: Erase the selected bookmark.
Menu 7.1
Menu 7.3
Push Messages
Inbox (Menu 7.3.1)
You can order Push messages from your service provider.
Push messages are notifications of, for example, news headlines
and they may contain a text message or address of a WAP service.
For availability and subscription, contact your WAP service
provider.
Service providers can update an existing push message every time
a new push message is received. Messages can be updated even
if you have moved them to another folder. Push messages expire
and they are deleted automatically.
• Information: Shows the information of received push
messages.
• Load: Allows you to connect to a specific site using the
information in the received push message.
• Delete: Delete the selected push message.
Receive (Menu 7.3.2)
You can set the option whether you will receive the message or not.
Profiles
A Profile is the network information used to connect to the internet.
Each profile has submenus as follows:
]
Activate: Set a current profile as a default.
]
Settings: Edit the various items of the current profile.
]
Rename: Revise the name of profile.
Menu 7.2
Menu 7.4
71
70
mMode services
]
Home: Connect the homepage which was set in active profile.
]
Reload: Connect the server again and then bring back the
page.
]
Bookmarks: Set the current homepage as a new bookmark or
move the established bookmark.
]
Set as bookmarks: Save the current URL as a bookmark.
You can also edit the bookmark title.
]
Message: Write and save the short message.
]
Push message: Save the push message.
]
Go to URL: Connect to the specific URL after editing.
]
Clear cache: Remove the contents of cache memory .
mMode services
Home
Connect to a homepage. The homepage may be the site which is
defined in the activated profile. It will be defined by the Service
Provider if you have not defined it in the activated profile.
Bookmarks
You can save up to 50 bookmarks. Scroll to the desired bookmark
and pressing left soft key [Options] to operate the following
options.
]
Connect: Connect to selected bookmark.
]
Add new: Save a new bookmark manually.
]
Edit: Edit the title and address of bookmark.
]
Delete: Erase the selected bookmark.
Menu 7.1
Menu 7.3
Push Messages
Inbox (Menu 7.3.1)
You can order Push messages from your service provider.
Push messages are notifications of, for example, news headlines
and they may contain a text message or address of a WAP service.
For availability and subscription, contact your WAP service
provider.
Service providers can update an existing push message every time
a new push message is received. Messages can be updated even
if you have moved them to another folder. Push messages expire
and they are deleted automatically.
• Information: Shows the information of received push
messages.
• Load: Allows you to connect to a specific site using the
information in the received push message.
• Delete: Delete the selected push message.
Receive (Menu 7.3.2)
You can set the option whether you will receive the message or not.
Profiles
A Profile is the network information used to connect to the internet.
Each profile has submenus as follows:
]
Activate: Set a current profile as a default.
]
Settings: Edit the various items of the current profile.
]
Rename: Revise the name of profile.
Menu 7.2
Menu 7.4
73
72
mMode services
WAP Information
The Browser version is displayed.
Reset Profiles
You can reset profiles to return to original settings.
Menu 7.7
Menu 7.8
Note A cache is a buffer memory, which is used to store data
temporarily.
Go to URL
You can directly connect to the site you want. You need to enter a
specific URL.
Cache Settings
The information or services you have accessed are stored in the
cache memory of the phone.
Clear Cache (Menu 7.6.1)
Remove all contexts saved in cache.
Cache Check (Menu 7.6.2)
Set a value whether a connection attempt is made through cache
or not.
]
Always: The cache is always checked whenever URL loading
or navigating.
]
Start only: The cache is only checked when the WAP is
started.
]
Off: The cache is never checked.
Menu 7.5
Menu 7.6
Q
&
A
Please check to see if any problems you have encountered with the
phone are described in this section before taking the phone in for a
service or calling a service engineer.
Q How do I view the list of outgoing calls, incoming calls and
missed calls?
A Press the key.
Q How do I clear all call history?
A Press the left soft key[Menu] and then the key.
Q How do I view all numbers stored in memory?
A Press right soft key[Names] and then .
Q Why is the connection abrupt or not audible in certain areas?
A When frequency environment is unstable in a certain area,
connection may be abrupt and not audible. Relocate to another
area and try again.
Q Why is the connection not consistent or abrupt even when
established?
A When frequency is unstable or weak or if there are too many
users, connection may be cut off even after it was established.
Please try again later or attempt after relocating to other areas.
Q Why does the LCD not turn on?
A Remove the battery and turn on the power after placing it back
on. If there is no change, fully charge the battery and try again.
73
72
mMode services
WAP Information
The Browser version is displayed.
Reset Profiles
You can reset profiles to return to original settings.
Menu 7.7
Menu 7.8
Note A cache is a buffer memory, which is used to store data
temporarily.
Go to URL
You can directly connect to the site you want. You need to enter a
specific URL.
Cache Settings
The information or services you have accessed are stored in the
cache memory of the phone.
Clear Cache (Menu 7.6.1)
Remove all contexts saved in cache.
Cache Check (Menu 7.6.2)
Set a value whether a connection attempt is made through cache
or not.
]
Always: The cache is always checked whenever URL loading
or navigating.
]
Start only: The cache is only checked when the WAP is
started.
]
Off: The cache is never checked.
Menu 7.5
Menu 7.6
Q
&
A
Please check to see if any problems you have encountered with the
phone are described in this section before taking the phone in for a
service or calling a service engineer.
Q How do I view the list of outgoing calls, incoming calls and
missed calls?
A Press the key.
Q How do I clear all call history?
A Press the left soft key[Menu] and then the key.
Q How do I view all numbers stored in memory?
A Press right soft key[Names] and then .
Q Why is the connection abrupt or not audible in certain areas?
A When frequency environment is unstable in a certain area,
connection may be abrupt and not audible. Relocate to another
area and try again.
Q Why is the connection not consistent or abrupt even when
established?
A When frequency is unstable or weak or if there are too many
users, connection may be cut off even after it was established.
Please try again later or attempt after relocating to other areas.
Q Why does the LCD not turn on?
A Remove the battery and turn on the power after placing it back
on. If there is no change, fully charge the battery and try again.
75
74
Q&A
Q Why is there an echo when a connection is made with certain
telephones in a certain area?
A This is called the ‘Echo Phenomenon’, where it occurs if
connection volume is too high or caused by special properties of
the equipment on the other end.
Q Why does the phone heat up?
A The phone may get hot when there is a very long call duration or
when games are played or even when surfing the Internet for a
long time. This has no effect upon the life of the product or
performance.
Q Why is there no ring tone, but only a blinking LCD screen?
A Phone may be set to ‘Vibrate only’ or in ‘Silent’ mode. In the
Profiles menu, please select ‘General’ or ‘Loud’.
Q Why does the battery life get shorter in standby mode?
A The battery is worn out. As time passes, the battery life gradually
becomes shorter. If the battery lasts about half the amount of time
as when first purchased, it’s time to purchase a new battery.
Q Why does the battery run out so quickly during normal use?
A It is due to the user environment or a large number of calls or
weak signal.
Q Why is no number dialed when you recall a phonebook entry?
A Check that the number has been stored correctly, by using the
Phone book Search feature. Re-store them, if necessary.
Q&A
Q Why can’t my correspondent reach me?
A Is you phone switched on ( pressed for more than three
seconds)? Are you accessing the right cellular network? Or, you
may have set an incoming call barring option.
Q I cannot find the lock, PIN, or PUK code. What is my password?
A The default lock code is ‘0000’. If you forget or lose the lock
code, contact your phone dealer. If you forget or lose a PIN or
PUK code, or if you have not received such a code, contact
your network service provider
75
74
Q&A
Q Why is there an echo when a connection is made with certain
telephones in a certain area?
A This is called the ‘Echo Phenomenon’, where it occurs if
connection volume is too high or caused by special properties of
the equipment on the other end.
Q Why does the phone heat up?
A The phone may get hot when there is a very long call duration or
when games are played or even when surfing the Internet for a
long time. This has no effect upon the life of the product or
performance.
Q Why is there no ring tone, but only a blinking LCD screen?
A Phone may be set to ‘Vibrate only’ or in ‘Silent’ mode. In the
Profiles menu, please select ‘General’ or ‘Loud’.
Q Why does the battery life get shorter in standby mode?
A The battery is worn out. As time passes, the battery life gradually
becomes shorter. If the battery lasts about half the amount of time
as when first purchased, it’s time to purchase a new battery.
Q Why does the battery run out so quickly during normal use?
A It is due to the user environment or a large number of calls or
weak signal.
Q Why is no number dialed when you recall a phonebook entry?
A Check that the number has been stored correctly, by using the
Phone book Search feature. Re-store them, if necessary.
Q&A
Q Why can’t my correspondent reach me?
A Is you phone switched on ( pressed for more than three
seconds)? Are you accessing the right cellular network? Or, you
may have set an incoming call barring option.
Q I cannot find the lock, PIN, or PUK code. What is my password?
A The default lock code is ‘0000’. If you forget or lose the lock
code, contact your phone dealer. If you forget or lose a PIN or
PUK code, or if you have not received such a code, contact
your network service provider
77
76
Travel Adapter
This adapter, allows you to charge
the battery.
It supports standard U.S. 120 Volt
60Hz outlets.
It takes 5 hours to charge a
completely discharged battery.
Vehicle Power Adapter
You can operate the phone and trickle
charge the phone battery from your
vehicle by using the vehicle power
adapter.
It takes 5 hours to charge a completely
discharged battery.
Battery
Standard battery is available.
There are a variety of accessories available for your mobile phone.
You can select these options according to your personal
communication requirements. Consult your local dealer for
availability.
Accessories
Accessories
Data Cable
Connects your phone to a PC.
Cable can be used for GPRS modem
connectivity and PC synchronization.
Headset
Connects to your phone, allowing
hands-free operation. Includes
earpiece, microphone, and integrated
call answer/termination button.
Note Data Cable and Vehicle Power Adaptor are not included and
must be purchased separately.
77
76
Travel Adapter
This adapter, allows you to charge
the battery.
It supports standard U.S. 120 Volt
60Hz outlets.
It takes 5 hours to charge a
completely discharged battery.
Vehicle Power Adapter
You can operate the phone and trickle
charge the phone battery from your
vehicle by using the vehicle power
adapter.
It takes 5 hours to charge a completely
discharged battery.
Battery
Standard battery is available.
There are a variety of accessories available for your mobile phone.
You can select these options according to your personal
communication requirements. Consult your local dealer for
availability.
Accessories
Accessories
Data Cable
Connects your phone to a PC.
Cable can be used for GPRS modem
connectivity and PC synchronization.
Headset
Connects to your phone, allowing
hands-free operation. Includes
earpiece, microphone, and integrated
call answer/termination button.
Note Data Cable and Vehicle Power Adaptor are not included and
must be purchased separately.
79
78
TIA Safety Information
Provided herein is the complete TIA Safety Information for Wireless
Handheld phones. Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices is required in the owner’s
manual for CTIA Certification. Use of the remaining TIA language is
encouraged when appropriate.
Exposure to Radio Frequency Signal
Your wireless handheld portable telephone is a low-power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over
120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available
body of research to develop the ANSI Standard (C95.1).
*American National Standards Institute; National Council on
Radiation Protection and Measurements; International Commission
on Non-Ionizing Radiation Protection
The design of your phone complies with the FCC guidelines (and
those standards).
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
Additional antennas may be purchased at buywireless.com/lg or by
Safety Guidelines
Safety Guidelines
calling LG at 800-793-8896. All accessories are subject to
availability.
Phone Operation
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently:
]
Do not touch the antenna unnecessarily when the phone is in
use. Contact with the antenna affects call quality and may cause
the phone to operate at a higher power level than otherwise
needed.
Driving
Check the laws and regulations on the use of wireless phones in
the areas where you drive. Always obey them. Also, if using your
phone while driving, please:
]
Give full attention to driving — driving safely is your first
responsibility;
]
Use hands-free operation, if available;
]
Pull off the road and park before making or answering a call if
driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of six (6’) inches be maintained between a
handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations
of Wireless Technology Research.
Persons with pacemakers:
79
78
TIA Safety Information
Provided herein is the complete TIA Safety Information for Wireless
Handheld phones. Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices is required in the owner’s
manual for CTIA Certification. Use of the remaining TIA language is
encouraged when appropriate.
Exposure to Radio Frequency Signal
Your wireless handheld portable telephone is a low-power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over
120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available
body of research to develop the ANSI Standard (C95.1).
*American National Standards Institute; National Council on
Radiation Protection and Measurements; International Commission
on Non-Ionizing Radiation Protection
The design of your phone complies with the FCC guidelines (and
those standards).
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
Additional antennas may be purchased at buywireless.com/lg or by
Safety Guidelines
Safety Guidelines
calling LG at 800-793-8896. All accessories are subject to
availability.
Phone Operation
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently:
]
Do not touch the antenna unnecessarily when the phone is in
use. Contact with the antenna affects call quality and may cause
the phone to operate at a higher power level than otherwise
needed.
Driving
Check the laws and regulations on the use of wireless phones in
the areas where you drive. Always obey them. Also, if using your
phone while driving, please:
]
Give full attention to driving — driving safely is your first
responsibility;
]
Use hands-free operation, if available;
]
Pull off the road and park before making or answering a call if
driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of six (6’) inches be maintained between a
handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations
of Wireless Technology Research.
Persons with pacemakers:
81
80
]
Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON;
]
Should not carry the phone in a breast pocket.
]
Should use the ear opposite the pacemaker to minimize the
potential for interference.
]
If you have any reason to suspect that interference is taking
place, turn your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer
or its representative regarding your vehicle.
You should also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so
require.
Aircraft
FCC regulations prohibit using your phone while in the air. Turn
your phone OFF before boarding an aircraft.
Safety GuidelinesSafety Guidelines
Blasting Areas
To avoid interfering with blasting operations, turn your phone OFF
when in a ‘blasting area’ or in areas posted: ‘Turn off two-way
radio’. Obey all signs and instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death.
Areas with a potentially explosive atmosphere are often, but not
always, marked clearly. Potential areas may include: fueling areas
(such as gasoline stations); below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal powders); and
any other area where you would normally be advised to turn off
your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
81
80
]
Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON;
]
Should not carry the phone in a breast pocket.
]
Should use the ear opposite the pacemaker to minimize the
potential for interference.
]
If you have any reason to suspect that interference is taking
place, turn your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer
or its representative regarding your vehicle.
You should also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so
require.
Aircraft
FCC regulations prohibit using your phone while in the air. Turn
your phone OFF before boarding an aircraft.
Safety GuidelinesSafety Guidelines
Blasting Areas
To avoid interfering with blasting operations, turn your phone OFF
when in a ‘blasting area’ or in areas posted: ‘Turn off two-way
radio’. Obey all signs and instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death.
Areas with a potentially explosive atmosphere are often, but not
always, marked clearly. Potential areas may include: fueling areas
(such as gasoline stations); below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal powders); and
any other area where you would normally be advised to turn off
your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
83
82
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for Devices and
Radiological Health Consumer Update on Mobile Phones.
1.Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radiofrequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the standby mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
2.What is the FDA’s role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level
that is hazardous to the user. In such a case, the FDA could
require the manufacturers of wireless phones to notify users of
the health hazard and to repair, replace, or recall the phones so
that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the wireless phone industry to take a
number of steps, including the following:
Safety GuidelinesSafety Guidelines
]
Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
]
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
]
Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
The FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF safety
to ensure coordinated efforts at the federal level. The following
agencies belong to this working group:
o National Institute for Occupational Safety and Health
o Environmental Protection Agency
o Occupational Safety and Health Administration
o National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
The FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on the FDA and
other health agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base
stations are thus not the subject of the safety questions discussed
in this document.
83
82
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for Devices and
Radiological Health Consumer Update on Mobile Phones.
1.Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radiofrequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the standby mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
2.What is the FDA’s role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level
that is hazardous to the user. In such a case, the FDA could
require the manufacturers of wireless phones to notify users of
the health hazard and to repair, replace, or recall the phones so
that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the wireless phone industry to take a
number of steps, including the following:
Safety GuidelinesSafety Guidelines
]
Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
]
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
]
Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
The FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF safety
to ensure coordinated efforts at the federal level. The following
agencies belong to this working group:
o National Institute for Occupational Safety and Health
o Environmental Protection Agency
o Occupational Safety and Health Administration
o National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
The FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on the FDA and
other health agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base
stations are thus not the subject of the safety questions discussed
in this document.
85
84
3.What kinds of phones are the subject of this
update?
The term ‘wireless phone’ refers here to handheld wireless
phones with built-in antennas, often called ‘cell’, ‘mobile’, or ‘PCS’
phones. These types of wireless phones can expose the user to
measurable radiofrequency energy (RF) because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety guidelines that
were developed with the advice of the FDA and other federal
health and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically lower
because a person’s RF exposure decreases rapidly with
increasing distance from the source. The so-called ‘cordless
phones,’ which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels, and
thus produce RF exposures far below the FCC safety limits.
4.What are the results of the research done
already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research methods.
Animal experiments investigating the effects of radiofrequency
energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have suggested that
low levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been
genetically engineered or treated with cancer-causing chemicals
so as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22
hours per day. These conditions are not similar to the conditions
under which people use wireless phones, so we don’t know with
certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
Safety GuidelinesSafety Guidelines
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term exposures,
since the average period of phone use in these studies was
around three years.
5.What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the
data that are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time tumors
develop — if they do — may be many, many years. The
interpretation of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day use of wireless
phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model of phone is used.
6.What is the FDA doing to find out more about
the possible health effects of wireless phone
RF?
The FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radiofrequency energy
(RF).
85
84
3.What kinds of phones are the subject of this
update?
The term ‘wireless phone’ refers here to handheld wireless
phones with built-in antennas, often called ‘cell’, ‘mobile’, or ‘PCS’
phones. These types of wireless phones can expose the user to
measurable radiofrequency energy (RF) because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety guidelines that
were developed with the advice of the FDA and other federal
health and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically lower
because a person’s RF exposure decreases rapidly with
increasing distance from the source. The so-called ‘cordless
phones,’ which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels, and
thus produce RF exposures far below the FCC safety limits.
4.What are the results of the research done
already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research methods.
Animal experiments investigating the effects of radiofrequency
energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have suggested that
low levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been
genetically engineered or treated with cancer-causing chemicals
so as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22
hours per day. These conditions are not similar to the conditions
under which people use wireless phones, so we don’t know with
certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
Safety GuidelinesSafety Guidelines
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term exposures,
since the average period of phone use in these studies was
around three years.
5.What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the
data that are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time tumors
develop — if they do — may be many, many years. The
interpretation of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day use of wireless
phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model of phone is used.
6.What is the FDA doing to find out more about
the possible health effects of wireless phone
RF?
The FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radiofrequency energy
(RF).
87
86
The FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The project has also helped develop a series of
public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through
contracts with independent investigators. The initial research will
include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
7.How can I find out how much radio frequency
energy exposure I can get by using my
wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC established these
guidelines in consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF exposure from
wireless telephones is set at a Specific Absorption Rate (SAR) of
1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with
the safety standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes
into consideration the body’s ability to remove heat from the
tissues that absorb energy from the wireless phone and is set
well below levels known to have effects. Manufacturers of
wireless phones must report the RF exposure level for each
Safety GuidelinesSafety Guidelines
model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/ rfsafety) gives directions for locating the
FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
8.What has the FDA done to measure the radio
frequency energy coming from wireless
phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio
frequency energy (RF) exposure from wireless phones and other
wireless handsets with the participation and leadership of FDA
scientists and engineers. The standard, ‘Recommended Practice
for Determining the Spatial-Peak Specific Absorption Rate (SAR)
in the Human Body Due to Wireless Communications Devices:
Experimental Techniques,’ sets forth the first consistent test
methodology for measuring the rate at which RF is deposited in
the heads of wireless phone users. The test method uses a
tissue-simulating model of the human head. Standardized SAR
test methodology is expected to greatly improve the consistency
of measurements made at different laboratories on the same
phone. SAR is the measurement of the amount of energy
absorbed in tissue, either by the whole body or a small part of the
body. It is measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone
complies with safety guidelines.
9.What steps can I take to reduce my exposure
to radiofrequency energy from my wireless
phone?
If there is a risk from these products — and at this point we do
not know that there is — it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
87
86
The FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The project has also helped develop a series of
public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through
contracts with independent investigators. The initial research will
include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
7.How can I find out how much radio frequency
energy exposure I can get by using my
wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC established these
guidelines in consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF exposure from
wireless telephones is set at a Specific Absorption Rate (SAR) of
1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with
the safety standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes
into consideration the body’s ability to remove heat from the
tissues that absorb energy from the wireless phone and is set
well below levels known to have effects. Manufacturers of
wireless phones must report the RF exposure level for each
Safety GuidelinesSafety Guidelines
model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/ rfsafety) gives directions for locating the
FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
8.What has the FDA done to measure the radio
frequency energy coming from wireless
phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio
frequency energy (RF) exposure from wireless phones and other
wireless handsets with the participation and leadership of FDA
scientists and engineers. The standard, ‘Recommended Practice
for Determining the Spatial-Peak Specific Absorption Rate (SAR)
in the Human Body Due to Wireless Communications Devices:
Experimental Techniques,’ sets forth the first consistent test
methodology for measuring the rate at which RF is deposited in
the heads of wireless phone users. The test method uses a
tissue-simulating model of the human head. Standardized SAR
test methodology is expected to greatly improve the consistency
of measurements made at different laboratories on the same
phone. SAR is the measurement of the amount of energy
absorbed in tissue, either by the whole body or a small part of the
body. It is measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone
complies with safety guidelines.
9.What steps can I take to reduce my exposure
to radiofrequency energy from my wireless
phone?
If there is a risk from these products — and at this point we do
not know that there is — it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
89
88
wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a
wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless
phone use.
10.What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want
to take steps to lower exposure to radiofrequency energy (RF),
the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance between the
user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
11.What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, the FDA helped
develop a detailed test method to measure electromagnetic
Safety GuidelinesSafety Guidelines
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final
draft, a joint effort by the FDA, medical device manufacturers,
and many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone
EMI.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses a
‘compatible’ phone and a ‘compatible’ hearing aid at the same
time. This standard was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, the FDA will conduct
testing to assess the interference and work to resolve the
problem.
12.Where can I find additional information?
For additional information, please refer to the following
resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF Safety
Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
89
88
wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a
wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless
phone use.
10.What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want
to take steps to lower exposure to radiofrequency energy (RF),
the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance between the
user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
11.What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, the FDA helped
develop a detailed test method to measure electromagnetic
Safety GuidelinesSafety Guidelines
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final
draft, a joint effort by the FDA, medical device manufacturers,
and many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone
EMI.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses a
‘compatible’ phone and a ‘compatible’ hearing aid at the same
time. This standard was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, the FDA will conduct
testing to assess the interference and work to resolve the
problem.
12.Where can I find additional information?
For additional information, please refer to the following
resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF Safety
Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
91
90
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government’s
Requirements for Exposure to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are
conducted using standard operating positions specified by the
FCC with the phone transmitting at its highest certified power level
in all tested frequency bands. Although SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. Because
the phone is designed to operate at multiple power levels to use
only the power required to reach the network, in general, the closer
you are to a wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested for
use at the ear is 0.714 W/kg and when worn on the body, as
Safety GuidelinesSafety Guidelines
described in this user’s manual, is 0.482 W/kg. (Body-worn
measurements differ among phone models, depending upon
available accessories and FCC requirements.) While there may be
differences between SAR levels of various phones and at various
positions, they all meet the government requirement for safe
exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on
FCC ID BEJG4011.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
(CTIA) website at http://www.wow-com.com
*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
91
90
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government’s
Requirements for Exposure to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are
conducted using standard operating positions specified by the
FCC with the phone transmitting at its highest certified power level
in all tested frequency bands. Although SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. Because
the phone is designed to operate at multiple power levels to use
only the power required to reach the network, in general, the closer
you are to a wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested for
use at the ear is 0.714 W/kg and when worn on the body, as
Safety GuidelinesSafety Guidelines
described in this user’s manual, is 0.482 W/kg. (Body-worn
measurements differ among phone models, depending upon
available accessories and FCC requirements.) While there may be
differences between SAR levels of various phones and at various
positions, they all meet the government requirement for safe
exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on
FCC ID BEJG4011.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
(CTIA) website at http://www.wow-com.com
*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
93
92
To help you understand the main technical terms and abbreviations
used in this booklet and take full advantage of the feature on your
mobile phone, here are a few definitions.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Divert
Ability to reroute calls to another number.
Call waiting
Ability to inform users that they have an incoming call when
engaged on another call.
GPRS (General Packet Radio Service)
GPRS guaranties continuous connection to the Internet for mobile
phone and computer users. It is based on the Global System for
Mobile Communication(GSM) circuit-switched cellular phone
connections and the Short Message Service(SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication, guaranteeing
compatibility between the various network operators. GSM covers
most European countries and many other parts of the world.
Caller ID
Service allowing subscribers to view or block the telephone numbers
of callers.
Multiparty Calls
Ability to establish a conference call involving up to five additional
parties.
Glossary
Glossary
Phone Password
Security code used to unlock the phone when you have selected
the option to lock it automatically each time it switches on.
Roaming
Use of your phone when you are outside your home area (when
traveling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to operate
the phone (network and memory information, as well as the
subscriber’s personal data). The SIM card fits into a small slot on
the back of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and from
another subscriber without having to speak to the correspondent.
The message created or received can be displayed, received,
edited or sent.
P/N: MMBB0110801 (1.0) DATE: 2003.12.10
Patent Information
This product was manufactured under one or more of the following U.S.
patents: 5276765 5749067 6061647
93
92
To help you understand the main technical terms and abbreviations
used in this booklet and take full advantage of the feature on your
mobile phone, here are a few definitions.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Divert
Ability to reroute calls to another number.
Call waiting
Ability to inform users that they have an incoming call when
engaged on another call.
GPRS (General Packet Radio Service)
GPRS guaranties continuous connection to the Internet for mobile
phone and computer users. It is based on the Global System for
Mobile Communication(GSM) circuit-switched cellular phone
connections and the Short Message Service(SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication, guaranteeing
compatibility between the various network operators. GSM covers
most European countries and many other parts of the world.
Caller ID
Service allowing subscribers to view or block the telephone numbers
of callers.
Multiparty Calls
Ability to establish a conference call involving up to five additional
parties.
Glossary
Glossary
Phone Password
Security code used to unlock the phone when you have selected
the option to lock it automatically each time it switches on.
Roaming
Use of your phone when you are outside your home area (when
traveling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to operate
the phone (network and memory information, as well as the
subscriber’s personal data). The SIM card fits into a small slot on
the back of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and from
another subscriber without having to speak to the correspondent.
The message created or received can be displayed, received,
edited or sent.
P/N: MMBB0110801 (1.0) DATE: 2003.12.10
Patent Information
This product was manufactured under one or more of the following U.S.
patents: 5276765 5749067 6061647
95
94
Index
A
Access codes 22
Accessories
76
Active flip
14,15
Add new
29,43,61
Add member
63
Adjusting the volume
24
Alarm clock
48
All calls
45
Answering a call
24
Answer mode
52
Auto redial
53
B
Backlight 50
Barring password
22
Battery
8,74,76
Bearer setting
40
Bookmarks
70
C
Cache check 72
Calculator
67
Calendar
57
Caller groups
62
Call divert
51,92
Call durations
45
Call register
44
Call waiting
30,52,92
Check memory
43,64
Clear cache
72
Conference calls
31
Contrast
50
Copy all
63
D
Delete recent calls 45
Delivery reports
40
Dialed calls
44
Display screen
14,15
Display information
17
E
End key 14,15
Ending a call
23
Entering text
25
F
FDN 54
Fixed dial number
54
Flip open
24,52
Index
G
Game 65
General
47,74,92
Go to URL
70
GPRS
17,46,56,92
GPRS information
46
GPRS settings
56
Group icon
62
Group ring tone
62
H
Headset 8,17,47,77
I
Inbox 37,38,42,71
In-call menu
29
Internet
35
L
Languages 38,42,51
Last call
45
Lower case
28
M
Making a Call 23
Making international calls
23
Manner Mode
25
Menu tree
33
Memo
59
Member list
62
Message key
14,15
Microphone
14,15
Minute minder
53
Missed calls
44
Mute off
30
Mute on
30
Muting the microphone
30
Multiparty calls
31,92
N
Name card 38,43
Navigation Key
14,15
Network settings
55
O
Outbox 39
Own number
64
P
Phonebook 60
Phone to SIM
63
Power key
14,15
Private call
32
R
Received Calls 44
95
94
Index
A
Access codes 22
Accessories
76
Active flip
14,15
Add new
29,43,61
Add member
63
Adjusting the volume
24
Alarm clock
48
All calls
45
Answering a call
24
Answer mode
52
Auto redial
53
B
Backlight 50
Barring password
22
Battery
8,74,76
Bearer setting
40
Bookmarks
70
C
Cache check 72
Calculator
67
Calendar
57
Caller groups
62
Call divert
51,92
Call durations
45
Call register
44
Call waiting
30,52,92
Check memory
43,64
Clear cache
72
Conference calls
31
Contrast
50
Copy all
63
D
Delete recent calls 45
Delivery reports
40
Dialed calls
44
Display screen
14,15
Display information
17
E
End key 14,15
Ending a call
23
Entering text
25
F
FDN 54
Fixed dial number
54
Flip open
24,52
Index
G
Game 65
General
47,74,92
Go to URL
70
GPRS
17,46,56,92
GPRS information
46
GPRS settings
56
Group icon
62
Group ring tone
62
H
Headset 8,17,47,77
I
Inbox 37,38,42,71
In-call menu
29
Internet
35
L
Languages 38,42,51
Last call
45
Lower case
28
M
Making a Call 23
Making international calls
23
Manner Mode
25
Menu tree
33
Memo
59
Member list
62
Message key
14,15
Microphone
14,15
Minute minder
53
Missed calls
44
Mute off
30
Mute on
30
Muting the microphone
30
Multiparty calls
31,92
N
Name card 38,43
Navigation Key
14,15
Network settings
55
O
Outbox 39
Own number
64
P
Phonebook 60
Phone to SIM
63
Power key
14,15
Private call
32
R
Received Calls 44
96
Index
S
Search 60
Security code
22
Send
14,15
Send my number
52
Set memory
64
Schedule
57
Scheduler tone
58
Side keys
14,15
Signal strength
25
Silent
47,74
SIM to phone
63
Speed dials
62
T
Templates 43
Text messages
37
Text template
38
Time format
49
Travel adapter
8,76
U
Unit converter 67
Upper case
28
V
Vibrate 47
View all schedules
58
Voice mailbox number
41
Voice messages
41
W
Wallpaper 50
WAP information
46,72
World time
68
Write message
37
1. Press the left soft key [Menu].
2. Scroll with the up/down navigation keys through the list of
menus until you reach the required menu.
3. Press the left soft key [OK].
4. Scroll with the up/down navigation keys through the list of
options until the required one is selected.
5. Press the left soft key [OK] to confirm.
Power on/off Press and hold .
Making a Call 1. Key in the number.
2. Press the key.
End a Call Briefly press the key.
Answer a Call Open the flip and
press the key.
Adjust the Volume Press the Side keys of
the phone.
Store numbers 1. Key in the number.
2. Press the left soft key [Options].
3. Press the left soft key [OK],[OK].
4. Enter the name.
5. Press the left soft key [Save].
Choose the 1. In standby mode, press left navigation
key.
2. Select an option:
Vibrate only, Silent, General, Loud.
3. Press the left/right navigation keys.
4. Press the key.
Search 1. Press the right soft key [Names].
2. Press the left soft key [OK].
3. Press the left soft key [Search].
How to Access Press and Hold .
(During a call)
mMode
in the Phonebook
Alert Type
Quick Reference Card
Access the Menu Function
96
Index
S
Search 60
Security code
22
Send
14,15
Send my number
52
Set memory
64
Schedule
57
Scheduler tone
58
Side keys
14,15
Signal strength
25
Silent
47,74
SIM to phone
63
Speed dials
62
T
Templates 43
Text messages
37
Text template
38
Time format
49
Travel adapter
8,76
U
Unit converter 67
Upper case
28
V
Vibrate 47
View all schedules
58
Voice mailbox number
41
Voice messages
41
W
Wallpaper 50
WAP information
46,72
World time
68
Write message
37
1. Press the left soft key [Menu].
2. Scroll with the up/down navigation keys through the list of
menus until you reach the required menu.
3. Press the left soft key [OK].
4. Scroll with the up/down navigation keys through the list of
options until the required one is selected.
5. Press the left soft key [OK] to confirm.
Power on/off Press and hold .
Making a Call 1. Key in the number.
2. Press the key.
End a Call Briefly press the key.
Answer a Call Open the flip and
press the key.
Adjust the Volume Press the Side keys of
the phone.
Store numbers 1. Key in the number.
2. Press the left soft key [Options].
3. Press the left soft key [OK],[OK].
4. Enter the name.
5. Press the left soft key [Save].
Choose the 1. In standby mode, press left navigation
key.
2. Select an option:
Vibrate only, Silent, General, Loud.
3. Press the left/right navigation keys.
4. Press the key.
Search 1. Press the right soft key [Names].
2. Press the left soft key [OK].
3. Press the left soft key [Search].
How to Access Press and Hold .
(During a call)
mMode
in the Phonebook
Alert Type
Quick Reference Card
Access the Menu Function
