Loading ...
Loading ...
Loading ...
15
B O S C H
You can download this manual from the local homepages of Bosch.
Problem Possible causes Solution
The soleplate turns
brown.
This is a regular
consequence of continued
use over a long period of
time.
Clean the soleplate with a
damp cloth.
The appliance
makes a pumping
sound.
Water is being pumped
into the steam tank.
The water tank is not tted
onto the housing correctly.
The sound will not stop.
This is normal.
Fit the water tank back onto
the hou sing correctly (you will
hear a click).
If the sound will not stop, do
not use the steam generator
and contact an authorised
technical service centre.
Loss of pressure
during ironing.
Steam release button has
been activated for too long
a period of time, that is,
it has been pressed too
frequently.
Use the steam release button
at intervals. This improves
the ironing result as the
textiles will be steamed, dried
and ironed properly.
Water spots appear
on the garment
during ironing.
May be caused by steam
condensed on the ironing
board.
Wipe the textile cover of the
ironing board, and iron any
water drops to dry them.
Water spots appear
on the garment
during use of the
“PulseSteam
function.
Water spots are caused by
steam condensation in the
hose when cooling down
after use.
Water drops stop coming out
of the soleplate after using
the “PulseSteam” function for
some time.
The hose gets hot
during use.
This is normal. It is caused
by the steam passing
through the hose during
steam ironing.
Place the hose on the
opposite side so that you
cannot touch the hose during
ironing.
Water leakage from
the boiler.
Drainage plug located
at the bottom of the
appliance is loose.
Tighten up the boiler drainage
plug with a coin
The iron does not
stop steaming after
placing it on the pad
(2).
“PulseSteam” function has
been activated by double
click.
Just press the trigger once
again and the iron will stop
steaming at once.
If the above does not solve the problem, get in touch with our customer service.
Loading ...