Loading ...
Loading ...
Loading ...
Installation and connection en
9
Before using the appliance for
the first time
1. Remove information material,
adhesive tape and protective film.
2. Clean the appliance.
~ "Cleaning" on page 24
Electrical connection
Caution!
Do not connect the appliance to
electronic energy saver plugs.
Note: You can connect the appliance
to mains-controlled and sine-controlled
inverters.
Mains-controlled inverters are used for
photovoltaic systems which are directly
connected to the national grid.
Sine-controlled inverters must be used
for isolated applications.Isolated
applications, e.g. on ships or in
mountain lodges, which are not directly
connected to the national grid.
1. After installing the appliance, wait at
least 1 hour before connecting it to
avoid damaging the compressor.
2. Connect the appliance to a correctly
installed socket.
The socket must comply with the
following data:
Outside Europe: Check whether the
indicated current type of the
appliance corresponds with the
values of your power supply. The
appliance specifications are
specified on the rating plate.
~ "Getting to know your appliance"
on page 10
3. Connect the appliance to a socket
near the appliance.
The socket must also be freely
accessible after installation of the
appliance.
:Warning
Risk of electric shock!
If the length of the mains cable is
insufficient, do NOT use multi-outlet
power strips or extension
leads.Instead, please contact
Customer Service for alternative
solutions.
Socket with 220 V ... 240 V
Protective
conductor
50 Hz
Fuse 10 A ... 16 A
Loading ...
Loading ...
Loading ...