Loading ...
Loading ...
Loading ...
9EN
Change the remote access
PIN code (for M665)
Note
• This feature is available only for models with answering
machine.
• The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Press / or MENU/OK > [Answ.
Machine] > MENU/OK.
2
Select [Remote access] > [Change PIN],
then press MENU/OK to conrm.
3
Enter the old PIN/passcode, then press
MENU/OK to conrm.
4
Enter the new PIN/passcode, then press
MENU/OK to conrm.
5
Enter the new PIN/passcode again, then
press MENU/OK to conrm.
» The setting is saved.
Charge the handset
Charge your handset by docking it in either
direction. When the handset is placed correctly
on the base station, you hear a docking tone
(see 'Set the docking tone' on page 21).
» The handset starts charging.
Note
• Charge the batteries for 8 hours before rst use.
• If the handset becomes warm when the batteries are
being charged, it is normal.
• Over time, capacity of batteries decreases. This is a
normal battery behavior.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the
base station, the bars indicate the
battery level (full, medium and
low).
When the handset is on the base
station/charger, the bars ash until
charging is complete.
The empty battery icon ashes.
The battery is low and needs
recharging.
The handset LCD backlight turns off if the
battery level is low. The handset turns off if the
batteries are empty. If you are on the phone,
you hear warning tones when the batteries are
almost empty. The call gets disconnected after
the warning.
What is standby mode?
Your phone is in standby mode when it is idle.
The handset name, date and time, and handset
number are displayed on the handset screen.
Display icons
In standby mode, the icons shown on the main
screen tell you what features are available on
your handset.
Icon Descriptions
Loading ...
Loading ...
Loading ...