Loading ...
Loading ...
Loading ...
Turn the POWER SWITCH to the “ON” position.
Turn the THERMOSTAT CONTROL DIAL to “LOW”.
4.
5.
6.
For faster heat up or to increase heat output, turn the
THERMOSTAT CONTROL DIAL clockwise to the “HIGH”.
The thermostat function controls the temperature output.
To decrease the heat output, turn THERMOSTAT CONTROL
DIAL counter clockwise.
Once the room reaches the desired temperature, slowly turn
the THERMOSTAT CONTROL DIAL counter clockwise until
you hear a “click”. This sets the heater to cycle ON/OFF to
It will normally require approximately 15 minutes to reach
operating temperature.
WARNING
7.
Plug the unit directly into a 120V AC electrical outlet.2.
1.
DO NOT cover heater at any time during operation, as there is risk
of FIRE if heater is covered.
maintain the desired heating temperature for energy efciency.
Loading ...
Loading ...
Loading ...