Loading ...
Loading ...
Loading ...
- 18 -
USE
•Iftheapparatusisequippedwiththe
following controls:
PLEASE NOTE: with this command it is
also possible to control the appliance
using a remote control, available on de-
mand.
•Synchronization:
ATTENTION! The remote control must be
synchronized with the hood before you
can use it.
To synchronize the remote control with
the hood, proceed as follows:
1. Go near the appliance while it is not
running and press the light key A of the
hood control 4 seconds until its indicator
light starts to blink for 5 seconds
2. When the indicator light of the hood lights blinks, press any key of the remote control.
The remote control is now synchronized.
3. If synchronization failed, repeat the procedure.
Lights key (A) = Turns lights on/off.
- Press this key to adjust light intensity.
- There are three brightness levels: high, medium, low.
When off, press once for the high level, twice for the medium level, three times for the low
level and four times to turn the lights back off.
The light level goes in this cycle: high, medium, low, off.
OFF key (B) = Turns MOTOR AND LIGHTS on/off. When activated, the matching LED turns
on for 1 sec.
Tasto (C) = 1st speed. When activated, the matching LED turns on.
Tasto (D) = 2nd speed. When activated, the matching LED turns on.
Tasto (E) = 3rd speed. When activated, the matching LED turns on.
Intensitive Key (E) = With the motor running and any speed set, press key E for 2 Sec. to
engage INTENSIVE speed (4th speed) for 10 minutes. While this function is active, the LED
blinks, and the LED of the previously set speed turns off.
When 10 minutes are up, the hood goes back to the last set speed with the relative LED
turning on.
- If you want to deactivate the function before 10 minutes are up, press the key E (back to
3rd speed). Pressing key B turns off the MOTOR and any LIGHTS still on.
- Even with the hood off, pressing key E for 2 seconds activates the INTENSIVE speed fun-
ction.
Timer Key (F) = Activates or deactivates the Timer function (delayed shutdown).
The Timer function is active when the matching LED turns on.
If the motor is off, pressing key F activates the motor at 1st speed for 5 minutes, after
which it turns off.
Loading ...
Loading ...
Loading ...