Loading ...
Loading ...
Loading ...
14 / English
Front-Loading Automatic Washer
Installation Instructions
• It is not recommended to install and operate the washer on a
wooden floor or soft floor. If you have to install your washer on a
wooden or frame construction floor, the floor must be reinforced
properly and the washer must be located in the corner of the room
if possible.
• Never place your washer on a carpet. This prevents air circulation.
The electrical components of the machine may overheat and cause
damage.
• Do not stand appliance on the power cable.
• Do not install and operate your washer in ambient temperatures
lower than 32˚F (0˚C). Controls may stop working properly in such
condition.
• If there is danger of frost, drain all remaining water in pump and
hoses since it may freeze and cause damage by bursting them (see
“Cleaning the drain pump filter”).
Installation Clearances
C
CAUTION
• The installation location must be large enough for the washer door
to be fully opened for loading.
• The installation location must be large enough for ease of
operation, maintenance and service.
• Ensure there is min 1/2” of clearance on each side of the washer
to allow slight sideways movement during washing and spin
drying.
Loading ...
Loading ...
Loading ...