Loading ...
Loading ...
Loading ...
24
Adjusting the front and
rear fader
1 Press (SOURCE) to select a source (tuner,
CD, or MD).
2 Press (SOUND) repeatedly until “F” for
the front speakers or “R” for the rear
speakers appears.
3 Press either side of (SEEK/AMS) to adjust
the volume of front/rear speakers.
4 Press (MENU) twice.
After three seconds, the display returns to
the normal playback mode.
Adjusting the cut-off frequency
and the output volume level for
the front/rear speakers
To match the characteristics of the installed
speaker system, you can adjust the output
volume level and the cut-off frequency of the
speakers.
1 Press (MENU).
2 Press either side of (DISC/PRST)
repeatedly until “Front HPF” or
“Rear HPF” appears, then press (ENTER).
Level
Frequency (Hz)
Cut-off frequency
3 Select the desired frequency and level.
1 Press either side of (SEEK/AMS) to
select the cut-off frequency.
Each time you press (SEEK/AMS), the
frequency changes as follows:
off y 78 Hz y 99 Hz y 125 Hz y
157 Hz y 198 Hz
2 Press either side of (DISC/PRST) to
adjust the volume level .
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
4 Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.
Tip
When you lower the volume all the way down,
“ATT” appears and the cut-off frequency is
disabled.
Loading ...
Loading ...
Loading ...