Cafe CDT836P2MS1 24" Built-In Top Control Dishwasher

Installation Instructions - Page 12

For CDT836P2MS1.

PDF File Manual, 48 pages, Read Online | Download pdf file

CDT836P2MS1 photo
Loading ...
Loading ...
Loading ...
CONNECT DRAIN LINE
(CONT.)
• Connect drain line to air gap, waste tee or disposer
using the previously determined method. Secure
hose with a screw-type clamp.
Method 1 – Air gap with waste tee or disposer
Method 2 – “High drain loop” with waste tee or
disposer
With this method you will need the drain hose hanger
set aside in Step 1.
Fasten drain hose to underside of countertop with the
provided hanger.
IMPORTANT – When connecting drain line to
disposer, check to be sure that drain plug has been
removed. DISHWASHER WILL NOT DRAIN IF PLUG
IS LEFT IN PLACE.
Tip: Avoid unnecessary service call charges for a
no drain complaint.
Make sure excess drain hose has been pulled through
the cabinet opening. This will prevent excess hose
in the dishwasher cavity from becoming kinked or
crushed by the dishwasher.
Dishwasher Installation
Waste Tee Installation
Disposer Installation
Figure AB
Waste Tee Installation
Disposer Installation
Figure AC
18"
Min.
32"
Min.
32"
Min.
18"
Min.
Drain Hose Hanger
Remove
Drain
Plug
12
CONNECT DRAIN LINE
The molded end of the drain hose will fit 5/8” through 1”
diameter inlet ports on the air gap, waste tee or disposer.
• Determine size of inlet port.
• Cut drain hose connector on the marked line, if required,
to fit the inlet port.
• If a longer drain hose is required, replace the provided
user bag drain hose with Café part WD24X10065, a
12’ long hose which can be connected directly to the
drain loop already attached to the unit (see Step 7). If
service part hose is not available, an additional hose
with coupler, ID of 5/8” or 7/8” and no longer than
66”, may be attached to the provided user bag drain
hose. Secure the connection with hose clamps to the
provided user bag drain hose.
NOTES:
DRAIN CONNECTION HEIGHT IS NOT TO EXCEED
72” ABOVE BOTTOM OF DISHWASHER.
TOTAL DRAIN HOSE LENGTH MUST NOT
EXCEED 12 FEET FOR PROPER DRAIN
OPERATION.
Figure Z
Cutting Line
1"
5/8"
IMPORTANT: Do not cut corrugated
portion of hose
STEP 17 STEP 17
Figure AA
Hose
Clamp
Coupler Hose
Clamp
Loading ...
Loading ...
Loading ...