Blomberg KFD4953XD User Manual

Loading ...

7 / 38 EN

Refrigerator / User Manual

3 Installation

3.1. Right place for installation

To ready the product for installation, see the

information in the user guide and make sure the

electric and water utilities are as required. If not, call

an electrician and plumber to arrange the utilities as

necessary.

WARNING: The manufacturer assumes

no responsibility for any damage caused

by the work carried out by unauthorized

persons.

WARNING: The product’s power cable

must be unplugged during installation.

Failure to do so may result in death or

serious injuries!

WARNING: If the door span is too

narrow for the product to pass, remove

the door and turn the product sideways; if

this does not work, contact the authorized

service.

•Placetheproductonaflatsurfacetoavoid

vibration.

•Placetheproductatleast30cmawayfromthe

heater, stove and similar sources of heat and at

least 5 cm away from electric ovens.

•Donotexposetheproducttodirectsunlightor

keep in damp environments.

•Theproductrequiresadequateaircirculationto

function efficiently. If the product will be placed

in an alcove, remember to leave at least 5 cm

distance between the product and the ceiling

and the walls.

•Donotinstalltheproductinenvironmentswith

temperatures below -5°C.

3.2. Attaching the

plastic wedges

Use the plastic wedges provided with the product

to provide sufficient space for air circulation

between the product and the wall.

1. To attach the wedges, remove the screws on the

product and use the screws provided with the

wedges.

2. Attach 2 plastic wedges on the ventilation cover

as shown in the figure.

3.3. Adjusting the stands

If the product is not in balanced position, adjust the

front adjustable stands by rotating right or left.

Loading ...

Blomberg KFD4953XD Innovative Two Door + Two Drawer Fridge Freezer

User Manual - Page 8