Loading ...
Loading ...
Loading ...
This is a function for your receiver only. You will Not transmit the alarm.
BATTERY SAVER
Reduces the battery power used when not receiving a signal. Battery saver turns on
automatically 10 seconds after no signal is received and no operation is being
performed.
BATTERY LOW ALERT
Reminds you that battery needs recharging. Alert tone will sound and Red LED will
blink.
MONITOR
When no signal is being received, Press and Hold the MONI. This is helpful for
adjusting volume level and receiving weak signals.
* BUSY CHANNEL LOCK-OUT (BCL)
BCL prevents you from transmitting on a channel if a signal is present. Pressing the
PTT switch while a channel is in use will emit an alert tone and inhibit the transmitter.
* BEEP TONE
If turned on, radio will give short tone to indicate that there is nothing programmed
for that channel.
* CTCSS / DCS
CTCSS (Continuous Tone Coded Squelch System) or
(Digital Coded Squelch). CTCSS / DCS Description
You may sometimes want to hear calls only from specific persons or groups. This
option allows you to ignore unwanted calls from others on the same frequency. These
tones are sub-audible (cannot be heard) and are selectable via software.
Note: These tones do NOT cause your conversation to be private or scrambled. It only
relieves you from listening to unwanted conversations.
SUMMARY of FUNCTION ACTIVATION
Ch 1-5, Press / Hold both PTT and MONI, and Power ON
VOX - ON / OFF.
Ch 10, Press / Hold both PTT and MONI, and Power ON
Loading ...
Loading ...