Loading ...
Loading ...
Loading ...
DRYING
WARNING: NEVER DRY GARMENTS MADE FROM FOAM
RUBBER OR FLAMMABLE MATERIALS.
The washer/dryer is fitted with an automatic safety cut out in the event of overheating.
IMPORTANT:
THIS DRYER CAN ONLY BE USED FOR LAUNDRY
WHICH HAS BEEN WASHED AND SPIN DRIED.
WARNING:
Indications given are general, therefore some practice is needed for the best drying results.
We recommend setting a lower drying time than indicated, when first using, so as to
establish the degree of dryness required. We recommend not to dry fabrics that fray easily,
such as rugs or garments with a deep pile, to avoid air duct clogging.
The water is then conveyed to the drain circuit, wich is sealed and therefore, no steam can
be released outside.
14
WARNING:
never open the door when drying is in process,if you wish
to stop the drying: turn off the machine (on/off) and
forward the drying timer to the and allow the cycle to
finish before opening the door.
Only dry pre-spun laundry
The washer/dryer can perform two types of drying:
1 Cotton, terry towelling, linen, hemp fabrics, etc... symbol on programme dial (L).
2 Mixed fabrics (synthetics/cotton), synthetic fabrics symbol on programme dial (L).
Therefore you may dry cotton, terry towelling, linen, hemp fabrics, etc. as follows:
A practical example:
Your laundry to be dried are cotton sheets.
• Open the door.
• Load a maximum of 2,5 kg.
• Close door.
• Turn programme dial (L) to
• If clothes are to be hung in cupboards straight from the machine, set drying time (I)
to “70-80”; if laundry is to be ironed, set drying time (I) to “60-70”.
• Press “HIGH DRY” button (F): drying temperature will increase considerably.
Warning: only use high dry with 100% cotton garments.
DOUBLE-SKIN DOOR
The appliance door is fitted with a protective shield to prevent
contact with the glass door which can reach high temperatures,
during the drying cycle.
It should not be necessary to remove the shield from the
machine during the normal course of use.
Warning: do not touch door for any reason.
• Make sure water inlet valve is open.
• Make sure water drain is correctly positioned.
15
Loading ...
Loading ...
Loading ...