Loading ...
Loading ...
Loading ...
8f
11
8e
620 min.
9
8a
8b
8c
8d
10
Important
If, after mounting the wooden panel, it is
necessary to ship the machine for final
installation, we recommend leaving it in its
original packaging materials.
For this reason the package was design to
allow the panel to be mounted without
having to unpack the machine completely.
Follow figures 8a-f sequentially.
A) Cut the polythene with a Knife (fig. 8a).
B) Lift the cardboard flap up and remove
the wooden slat (fig. 8b).
C) To open the dishwasher remove the
polystyrene from the sides (fig. 8c).
D) Fix the décor panel to the matching
kitchen door (fig. 5-6), then while the
dishwasher door is in the open
position attach it to the machine using
the 6 screw 3.5 x 13 mm (fig. 8d).
E) Replace the cardboard and film in its
original position (fig. 8e).
F) Re–seal the packaging (fig. 8f).
Adaptation of the base
Sometime, in order to allow the door
rotation, a space must be cut out in the
base as indicated in the figure 9.
Proceed as follows:
■ Open slightly the dishwasher door, let
the covering touch the base and mark its
lower edge on the base with a pencil; cut
out the interfering part.
Loading ...
Loading ...
Loading ...