Loading ...
Loading ...
Loading ...
4 49-5000092
USING THE AIR CONDITIONER
Controls
Features and appearance will vary.
Lights below the touch pads on the air conditioner control panel indicate the selected settings.
Note: The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to degree
Celsius (°C), press the Temp Increase + and Temp Decrease - buttons together and hold for 3 seconds. Repeat the
process to change back to degree Fahrenheit (°F)
Power Pad
Turns air conditioner on and off. When turned on, the
display will show the room temperature.
Display
Shows the room temperature or time remaining on the
Delay timer. Shows the Set temperature while setting
the temperature in Heat, Cool or ECO modes.
Temp Increase + /Decrease – Pads
8VHWRVHWWHPSHUDWXUHZKHQLQ+HDW&RRORU(&2
mode. The Set light will turn on while setting.
Delay Increase + /Decrease – Pads
Each touch of the Increase + / Decrease - pads on the
unit or the Increase + / Decrease – pads on the remote
control will set the delay time when using the Delay
1–24hr timer. The Set light will turn on while setting.
Fan Speed Pads
8VHWRVHWWKHIDQVSHHGWR/RZ0HG+LJK
or Auto on the unit. NOTE: On the remote control, use
the fan speed Increase + / Decrease – pads to set the
IDQVSHHGVWR/RZ0HGRU+LJK8VHWKH$XWRSDGWR
turn Auto fan on.
Mode Pad
8VHWRVHWWKHDLUFRQGLWLRQHUWR+HDW&RRO(&2RU
Fan Only mode.
WiFI
Enables connection of the air conditioner to the home
WiFi. Download App for details at GEAppliances.com/
connect.
Filter Reset Pad
LED will turn on when fan has accumulated 250 hours
of run time as a reminder to clean filter. Press Reset
Filter to turn off the LED and reset the accumulated
run time.
Control Display On and Off
To reduce brightness during sleeping hours, this
air conditioner control display has an automatic
off feature where the control display will turn
off completely after 5 minutes of inactivity.
To illuminate the control interface, press any
button on the control display or remote control.
The control display will illuminate all previously
illuminated LED’s. The control interface will now
respond to any prescribed button press after it is
illuminated.
Press and hold the FAN+MODE buttons
simultaneously to toggle this feature ON or OFF. The
LED’s will now stay ON anytime the unit is ON.
Control sound on/off
This air conditioner will make a beep when the
buttons on the control are pushed or if the unit
receives a command from the mobile app or remote
control. To silence these beeps, simultaneously
press the FAN and “-” buttons for 3 seconds. Press
these buttons again to toggle the sound back on.
Air Conditioner
NOTE: The display always shows the room temperature
H[FHSWZKHQsetting the Set temperature or the Delay timer.
Remote Control
Fan Fan
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Auto Fan on
Fan speed
Increase
8QLWSRZHU
on/off
Auto
High
Med
Low
Cool
Fan
Eco
Reset
Filter
Fan Mode
Power
WiFi
8
Light indicates
WiFi connection
Light indicates the unit is in
the temperature set mode.
Loading ...
Loading ...
Loading ...